Where to Apply for a Motorcycle Driver's License in Shenzhen?

Is it a violation to make a U-turn at a red light?

Making a U-turn at a red light in a left-turn lane with a U-turn sign at an intersection is not considered a violation, but it must be done without affecting the passage of other vehicles or pedestrian safety. Below are relevant details: 1. Regulations: Motor vehicles are prohibited from making U-turns at locations with no U-turn or no left-turn signs/markings, as well as at railway crossings, crosswalks, bridges, sharp curves, steep slopes, tunnels, or other potentially hazardous road sections. 2. Precautions: At intersections without traffic lights, do not blindly edge forward. At such intersections, pedestrians and non-motorized vehicles may cross unpredictably. In case of a collision at higher speeds, the consequences for pedestrians can be severe. At these intersections, always reduce speed in advance, proceed slowly while edging forward, sound the horn to alert other road users, and ensure safety before proceeding.

19

4

Share

How Long Does the Battery of a Pure Electric Vehicle Last?

Pure electric vehicle battery lifespan varies depending on usage conditions. With less frequent use, it can last 3 to 5 years, while with frequent use, it generally lasts around 2 years. Here is more relevant information: 1. Parameters for measuring battery performance: (1) Charge-discharge cycle life, which is an important parameter for evaluating secondary battery performance. (2) The charge-discharge cycle life of secondary batteries is related to factors such as depth of discharge, temperature, and charge-discharge modes. (3) Wet shelf life, another crucial parameter for assessing secondary battery performance. 2. Methods to extend battery life: (1) Gentle acceleration. (2) Ensure the battery is adequately charged even during prolonged parking. (3) Avoid excessively long charging times. (4) Protect the battery from extreme heat or cold.

1

4

Share

What procedures are required for licensing a fully imported vehicle?

The procedures required for licensing a fully imported vehicle include: 1. Documents: Essential materials for licensing include the original and copy of the Certificate of Imported Goods, the original (two copies) and copy of the Imported Motor Vehicle Inspection Sheet, the original (three copies) of the Unified Invoice for Motor Vehicle Sales, a copy of personal ID / original and copy of the organization's code certificate for units, bring the official seal as many places require stamping, and the duplicate of compulsory insurance. 2. Entry-Exit Inspection and Quarantine Bureau: Go to the local Entry-Exit Inspection and Quarantine Bureau to obtain the 'Imported Motor Vehicle Quarantine Certificate', fill out the application form, provide the Certificate of Imported Goods, Imported Motor Vehicle Inspection Sheet, copy of the vehicle purchase invoice, copy of the organization's code certificate, which needs to be stamped with the unit's official seal, and for individuals, provide a copy of the ID card and sign. 3. Payment of Vehicle Purchase Tax: Go to the State Tax Bureau to pay the vehicle purchase tax, fill out the purchase tax declaration form, provide the Certificate of Imported Goods, copy of the locally reissued Imported Motor Vehicle Inspection Sheet, tax payment copy of the vehicle purchase invoice, and copy of the organization's code certificate.

5

1

Share

How to Replace the Battery in a Chery Car Key?

Method for replacing the battery in a Chery car key: 1. Prepare the tools: battery (the model may vary depending on the car model) and a flathead screwdriver. 2. Insert the flathead screwdriver into the side seam (or bottom) of the key and pry open the plastic cover. 3. Once opened, you can see the battery. Remove the old battery and insert the new one. Additional information: 1. When the owner enters the sensing area of the key system, as long as they touch the car door handle, the identity-recognition "key" they carry will receive the low-frequency signal sent by the car. If this signal matches the identity-recognition information stored in the "key," the "key" will be activated. After being activated, the "key" will analyze the authentication command sent by the car and send a corresponding signal. These signals are encrypted to enhance security. 2. After turning off all circuits and removing the key, when locking the car doors, only open the driver's door (the other three doors should be closed). Hold down the lock button for 5 seconds, then hold down the unlock button for another 5 seconds. Release the lock button first, then the unlock button. At this point, the car will emit two beeps, and the turn signals will flash twice simultaneously.

16

1

Share

What to do when the dashboard battery indicator turns red?

The red battery indicator on the dashboard means the engine is not generating electricity. The solutions are: 1. Check if the battery terminals are oxidized - clean and polish them if necessary, then reinstall and test. Oxidation can sometimes prevent battery charging; 2. Inspect whether the battery's positive and negative cables show signs of looseness. Reasons for the red battery indicator include: 3. Damaged battery; 4. Faulty generator rectifier bridge causing uncontrolled voltage output; 5. Broken generator belt, damaged generator, or fractured positive/negative cables; 6. Electrical leakage in vehicle equipment may also trigger the indicator light, though with weaker brightness.

17

3

Share

When Should Engine Oil Be Changed?

It is recommended to change conventional engine oil every 4,000-5,000 kilometers, semi-synthetic oil every 6,000-7,500 kilometers, and full-synthetic oil every 8,000-10,000 kilometers. Here is more relevant information: 1. Function of Engine Oil: Engine oil, also known as engine lubricant, serves multiple purposes such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a car. Engine oil consists of base oil and additives. The base oil is the primary component of lubricants and determines their fundamental properties. 2. Methods to Identify Engine Oil Condition: (1) Smell Test: Pull out the dipstick and smell it. If there is a strong sour or foul odor, it indicates the oil has deteriorated and should be changed. (2) Rub Test: Take some old oil and rub it between your thumb and forefinger repeatedly. Good-quality oil will feel smooth, produce little residue, and have no gritty sensation. If you feel impurities, poor viscosity, or even a rough texture, it should be replaced. (3) Color Test: Place a few drops of old oil on a clean white filter paper (or high-quality tissue paper). After the oil spreads, good-quality oil will leave no powder, feel dry and smooth to the touch, and show a clear yellow stain. If the oil appears dark brown or black and contains impurities, it should be changed. (4) Light Test: Hold the dipstick at a 45-degree angle and observe the oil droplets under light. If no metal particles are visible, the oil is in good condition. If there are many particles, it should be replaced.

18

0

Share

Where to Apply for a Motorcycle Driver's License in Shenzhen?

Is it a violation to make a U-turn at a red light?

How Long Does the Battery of a Pure Electric Vehicle Last?

What procedures are required for licensing a fully imported vehicle?

How to Replace the Battery in a Chery Car Key?

What to do when the dashboard battery indicator turns red?

When Should Engine Oil Be Changed?

How to connect Bluetooth for music playback in BMW X6?

What Causes Brake Pads to Grind Against Brake Discs?

What does setup mean in cars?

Does a new car need inspection in the second year?