···
Log in / Register

Where to Apply for a Driver Information Card?

4 Answers
VanKathryn
07/29/25 3:11pm

Driver information cards can be processed at banks designated by the local traffic bureau or immediately on the websites of relevant service providers. Drivers who wish to operate medium-sized or heavy-duty trucks must apply for a driver information card. Otherwise, if caught by transportation authorities, corresponding penalties will be imposed. According to relevant regulations, each driver can only apply for one card. It is not permitted for a single driver to hold multiple cards, as this could lead to misjudgment during traffic police inspections for dangerous driving, posing significant safety risks. For the first issuance of a driver information card, no processing fee is required, and there is no annual fee. However, if the card is lost or damaged and needs to be reissued or replaced, a processing fee must be paid, with the cost determined according to standards approved by the National Development and Reform Commission and the Ministry of Finance. After receiving the new card, vehicle owners should affix the driver information card to the upper middle part of the vehicle's windshield in a position that does not obstruct the driver's view. In cases where there is no windshield, the card should be affixed to an appropriate location on the front of the vehicle.

Was this review help?
16
2
Share
VanDaniel
08/13/25 7:53am

I remember when I first started driving, I was a bit confused about where to get the driver's information card. Later, I found that the most convenient way was to use the Traffic Management 12123 App on my phone. Just download and install it from the app store, log in with real-name authentication, select the driver's business module, upload ID photos, fill in the information, and schedule a medical checkup and pickup time—done! No need to run around or wait in long lines. If the App doesn't work, you can go to the local DMV or traffic police station counter, but it's best to check their working hours in advance and bring all the required documents to avoid a wasted trip. This card is actually a supplementary proof of health status for your driver's license and needs to be updated every two years to ensure your physical condition meets the standards, giving you peace of mind while driving. I went through this process last year and found it very easy—modern technology really helps a lot.

Was this review help?
8
5
Share
Expand All
Shelley
10/11/25 6:58am

As a seasoned driver with years of experience, I often remind newcomers that to apply for a driver's information card, they can simply go to the service window of the vehicle management office or traffic police station. In the past, we had to queue up early in the morning with copies of our ID cards and one-inch photos, but now it's much simpler with self-service machines for quick processing. The key is to check the address online in advance, such as entering the area code on the official website of the traffic management bureau to find nearby locations. It's advisable to avoid holidays and bring a health report to get everything done in one go. This card isn't just for obtaining a driver's license; it also requires regular medical check-ups to prove normal vision and blood pressure, which is crucial for safe driving—don't delay. I always get a medical check-up before renewing my card to ensure everything is correct, making the process efficient and hassle-free.

Was this review help?
9
2
Share
Expand All
SanFelicity
11/24/25 8:05am

Right after getting my driver's license, I went to apply for the driver's information card. Simply put, it's about visiting the local vehicle management office to fill out forms, submit documents, wait for approval, and receive the card. Alternatively, designated hospitals or medical centers partnered with driving schools can also handle the process. Just bring your ID card and photos, and it can be completed on the same day, very convenient. Checking the specific address online beforehand saves a lot of hassle.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

Does the Steering Wheel Control the Front or Rear Wheels?

The steering wheel is used to control the direction of the front wheels, constantly adjusting their orientation. In general household vehicles, such as sedans and MPVs, the front wheels are controlled for steering. Special vehicles, like forklifts and large excavators, use the steering wheel to control the rear wheels. Reasons for not controlling the rear wheels: 1. Instability: Rear-wheel steering has extremely poor stability, making it difficult to control at higher speeds, which goes against normal driving logic. 2. Cost-ineffectiveness: Current steering assistance systems are divided into hydraulic and electronic types. Electronic power steering theoretically doesn't require mechanical structures for steering, so purely rear-wheel steering could eliminate the need for mechanical backups. However, without mechanical backups, if the vehicle malfunctions, steering control would be lost. If mechanical backups are implemented, a steering rod as long as 1 to 2 meters would be required. Given that cost is a decisive factor in current vehicle manufacturing, this approach would never be permitted.
2
2
Share

Do You Need to Press the Brake When Shifting Gears in a Manual Transmission Car?

Shifting gears in a manual transmission car does not require pressing the brake. When shifting gears, you must first press the clutch pedal all the way down, and the operation of the gear lever should be light, quick, gentle, and precise. The starting steps for such a car are: 1. Insert the key and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch all the way down and turn the key to the 'start' position. Manual transmission cars are equipped with a manual gearbox, which works by switching different gear sets to achieve gear ratio changes. The manual gearbox consists of a power input shaft, an output shaft, and gears. The power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. Different gear ratios result in different power transmission effects, and shifting gears while driving refers to changing the gear ratio.
3
1
Share

What is the model positioning of the Haval H6?

The model positioning of the Haval H6 is a compact urban SUV. This vehicle is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. There are also two types of transmissions available: a 6-speed manual transmission and a 7-speed dual-clutch transmission. The dimensions of the Haval H6 are 4649 mm in length, 1852 mm in width, and 1710 mm in height, with a wheelbase of 2680 mm. The trunk capacity of this car is 808 liters without folding down the rear seats, and expands to 2010 liters when the rear seats are folded, offering ample space and excellent practicality. Haval is a brand specializing in manufacturing SUVs, with a wide range of SUV models under its lineup. Haval SUVs enjoy strong sales and a good reputation in the domestic market, known for their high cost-performance ratio, rich configurations, and attractive exterior design.
4
0
Share

Is 4WD Full-Time Four-Wheel Drive or Part-Time Four-Wheel Drive?

4WD refers to four-wheel drive. The classifications are as follows: 1. Full-time drive: The front and rear wheels always maintain a four-wheel drive mode, with the engine output torque distributed 50:50 between the front and rear wheels during driving. Full-time drive offers excellent driving control and tracking performance, but it consumes more fuel and has poor fuel economy. 2. Part-time drive: The driver can switch between two-wheel drive or four-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for general off-road vehicles or 4WD SUVs. 3. On-demand drive: The drive mode is controlled by a computer. Under normal road conditions, (front) rear-wheel drive is generally used. If the road is poor or the drive wheels slip, the computer will automatically detect and immediately distribute the engine output torque to the other two wheels, switching to four-wheel drive mode. This system is simple to operate.
8
1
Share

What to Do When the Manual Gear Lever Becomes Loose?

Manual gear lever becomes loose due to wear of the plastic washer at the linkage joint between the gear lever and the transmission or loosening of the screws. The following are the solutions and precautions: Solutions: Disassemble the gear lever, replace the new plastic washer and tighten the screws. If it does not affect daily gear shifting, it may not need to be replaced. Precautions for Manual Gear Shifting: The clutch pedal should be quickly pressed to the bottom. After shifting gears, the clutch pedal should be lifted quickly at the beginning, and when it reaches the semi-engaged state, it should be lifted slowly, and then lifted quickly until released. When shifting gears, master the timing of shifting, the clutch should be pressed to the bottom in one step, and gear shifting should also be done in one step. Familiarize yourself with the gear positions and practice the feel more.
19
3
Share

Should Brake Pads Be Replaced Along with Brake Discs?

Whether to replace brake pads along with brake discs depends on the wear condition of both components. If the brake pads have been recently replaced and show minimal wear, there is no need to replace them. Brake pads play a crucial role in braking and are composed of a steel plate, adhesive heat insulation layer, and friction material. The steel plate undergoes anti-rust coating, with the coating process monitored by a furnace temperature tracker to ensure quality by detecting temperature distribution. Steps for replacing brake pads: 1. Release the handbrake, loosen the hub bolts of the wheel requiring brake service, and use a jack to lift the car and remove the tire; 2. Remove the tire to expose the brake caliper and disc, applying lubricant to loosen any screws or nuts that need to be removed; 3. Secure the brake caliper with a rope and remove the old brake pads; 4. Open the hood and unscrew the cap of the brake fluid reservoir; 5. Install the new brake pads in the correct position.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.