Where to Adjust the Remote Key Lock Sound?

What does Emergency Lane Keeping mean?

Emergency Lane Keeping System intervenes more actively in the driving path only when an emergency situation is detected. Introduction to Lane Keeping Assist System: Lane Keeping, fully known as Lane Keeping Assist System, is a type of intelligent driving assistance system. When the vehicle deviates from the recognized lane markings, the steering wheel will vibrate, and the vehicle will alert the driver with a "beep" sound to pay attention to safe driving. Function of Lane Keeping Assist System: The Lane Keeping Assist System helps correct the driving path when the vehicle gradually deviates from the lane. Typically, the system will issue a warning to the driver to correct the driving path; however, these systems will also slightly steer the vehicle to prevent it from continuing to deviate from the lane.

8

0

Share

What causes the abnormal noise when stepping on the accelerator in a Sylphy?

The reasons for abnormal noise when stepping on the accelerator in a Sylphy may be: This phenomenon is likely caused by the sound from the valves, or it could be due to insufficient engine oil leading to lack of lubrication in the valves. During cold starts, the engine noise is generally slightly louder than when the engine is warm. The reasons for abnormal noise when stepping on the brake in an automatic transmission vehicle are as follows: 1. Normal activation of ABS: The working process of ABS is actually a cycle of locking and releasing, keeping the vehicle in a state of critical lock rolling. When you step on the brake hard and trigger the ABS, it will produce a clunking sound, which is normal. In this case, simply press the brake pedal firmly to the bottom. 2. The gear makes a "clunk" sound when stepping on the brake in an automatic transmission vehicle: If you hear a "clunk" sound between the transmission and the gear lever when stepping on the brake pedal, the main reason for this noise may be the electronic linkage between the brake system and the automatic transmission. When you step on the brake, the transmission solenoid valve opens and produces a "clunk" sound. At this time, you need to press the gear lock button to shift gears, which serves as a safety reminder.

4

0

Share

Does the Bora have tire pressure monitoring?

The Bora comes with tire pressure monitoring as a standard feature, which is a very practical configuration. Currently, there are two types of tire pressure monitoring systems used in vehicles: active and indirect, with significant differences between them. The active tire pressure monitoring system, abbreviated as PSB, is more expensive but offers better performance. The passive tire pressure monitoring system, abbreviated as WSB, also known as indirect tire pressure monitoring, is comparatively less precise and more cost-effective. Below is an introduction to tire pressure monitoring: 1. The tire pressure monitoring system (TPMS) is a technology that can automatically monitor various conditions of the tires in real-time by recording the rotational speed of the tires or through electronic sensors installed inside the tires, providing effective safety assurance for driving. 2. TPMS can be divided into two types: one is the indirect TPMS, which determines tire abnormalities by detecting differences in tire rotational speeds; the other is the direct TPMS, which involves installing four tire pressure monitoring sensors inside the tires to automatically monitor tire pressure and temperature in real-time, whether the vehicle is stationary or moving. It also provides timely alerts for high pressure, low pressure, or high temperature in the tires, helping to prevent traffic accidents caused by tire failures and ensuring driving safety. 3. Direct systems can offer more advanced features, such as measuring the actual instantaneous pressure inside each tire at any time, making it easy to identify a faulty tire. Indirect systems are relatively cheaper to manufacture, and vehicles already equipped with 4-wheel ABS (with one wheel speed sensor per tire) only require a software upgrade.

4

2

Share

What Are the Symptoms of a Damaged Brake Wheel Cylinder?

Automobile brake wheel cylinder damage symptoms include soft brakes, brake failure, and brake pulling. Soft Brakes: When pressing the brake pedal, if you notice the braking feel is significantly softer and the stability decreases with repeated presses, it may indicate poor sealing of the master cylinder or wheel cylinder pistons, or a rupture somewhere in the brake lines causing oil leakage. In this case, check for any signs of brake fluid leakage. Brake Failure: If you experience a sudden momentary loss of braking while applying the brakes, check the brake fluid level first, then inspect the master cylinder, wheel cylinder, and brake lines for any traces of brake fluid. If present, it indicates severe oil leakage from the wheel cylinder or master cylinder, requiring immediate repair. Brake Pulling: If the car pulls to one side during braking, it is likely due to rust in the wheel cylinder or expansion of one of the pistons inside. This issue must be addressed promptly as controlling the direction during pulling is difficult, especially in cars without ABS (Anti-lock Braking System), posing a certain danger.

17

5

Share

Can I still take the test if I'm late for Subject 4?

Generally speaking, you can still take the test on the same day if you're late for Subject 4. Latecomers can apply to the staff at the test center to participate in the next test session. Under normal circumstances, the test center will approve the application and arrange the candidate for the next group's test. Here is more information about Subject 4: 1. Subject 4 test content: (1) The questions for Subject 4 are selected from a question bank (currently 1,240 questions for cars and 1,715 questions for large vehicles) in proportion, with 50 questions to be answered. (2) Among them, there are 22 true/false questions, 23 single-choice questions, and 5 multiple-choice questions. The questions are mainly presented in the form of cases, pictures, animations, etc. The total score is 100 points, with each question worth 2 points. A score of 90 or above is required to pass, and the test duration is 45 minutes. 2. Measures for failing Subject 4: (1) There is no need to retake the previously passed subjects. You can schedule a retest yourself, and no retest fee is required. (2) Currently, there are no restrictions on the number of retests for Subject 4, meaning you can retake it indefinitely. However, the validity period of the driving skills test permit is only three years, so technically, you can retake it indefinitely within the validity period.

15

2

Share

What does CS new energy vehicle mean?

It is the abbreviation of capital-stock, meaning equity. The following is a relevant introduction about new energy vehicles: 1. Vehicle types: New energy vehicles include four major types - hybrid electric vehicles, pure electric vehicles (including solar-powered vehicles), fuel cell electric vehicles, and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). 2. Reasons for promoting new energy vehicles: The promotion of new energy vehicles is aimed at addressing environmental protection and oil crisis needs, reducing or abandoning the current mainstream models that burn traditional gasoline or diesel to drive internal combustion engines.

20

4

Share

Where to Adjust the Remote Key Lock Sound?

What does Emergency Lane Keeping mean?

What causes the abnormal noise when stepping on the accelerator in a Sylphy?

Does the Bora have tire pressure monitoring?

What Are the Symptoms of a Damaged Brake Wheel Cylinder?

Can I still take the test if I'm late for Subject 4?

What does CS new energy vehicle mean?

Why Do License Plates Fall Off When Wading Through Water?

What is the speed limit on highways in kilometers per hour?

What are the reasons why the Wuling Hongguang Mini cannot start?

How much over the speed limit is driving at 140 km/h?