Where to Add Windshield Washer Fluid in Volkswagen?

What is the fuel tank capacity of the Wuling Rongguang 1.2 in liters?

The fuel tank capacity of the Wuling Rongguang-2020 1.2L S Basic Model National VI is 45 liters. It is equipped with a 1.2L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain configuration is mid-engine, rear-wheel drive. The front suspension type is MacPherson independent suspension, and the rear suspension type is longitudinal leaf spring. Among vehicles in the same class, the Youyou-2021 1.2L Value Extended Blind Window Cargo 2-Seater LJ469Q-AEB has a fuel tank capacity of 40 liters, while the Wuling Rongguang-2021 1.5L Extended Basic Model L3C also has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by automobile manufacturers is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow from the tank's safety space. If fuel is filled up to the tank opening during refueling, the actual refueling amount may be greater than the calibrated fuel tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it indicates a sufficient fuel level.

3

4

Share

What are the reasons for the Wuling Hongguang's air conditioning not cooling?

The reasons for the Wuling Hongguang's air conditioning not cooling are refrigerant leakage, internal damage to the air conditioning pump, and excessively dirty condenser fins. Refrigerant leakage: The refrigerant in the air conditioning system leaks, resulting in no refrigerant, so the air conditioning does not cool. You can check whether components such as the pipelines in the air conditioning system, the air conditioning pump, the condenser, and the evaporator are damaged, leading to refrigerant leakage. Another method is to add fluorescent dye along with the refrigerant. After using the vehicle, inspect the air conditioning system with a specialized fluorescent lamp. If there is a leak, the point will glow, indicating that the component is damaged. Internal damage to the air conditioning pump: For example, damage to the piston rings inside the air conditioning pump or damage to the clutch plate. This causes the air conditioning pump to fail to operate, thus preventing the cooling effect. Generally, a damaged air conditioning pump will produce abnormal noises. Check the air conditioning pump, and if it is damaged, it needs to be replaced. Excessively dirty condenser fins: If the condenser fins in the air conditioning system are too dirty, it can cause the pressure and temperature in the air conditioning system to rise too high. To protect the air conditioning system, the air conditioning pump stops working, so the air conditioning does not cool. While driving, the vehicle's speed can be used to help dissipate heat from the air conditioning system, so the air conditioning system will cool when the vehicle is moving. You can use a high-pressure water gun to clean the condenser fins and then dry them with a high-pressure air gun.

20

2

Share

What is the difference between GAC and FAW?

The differences between GAC and FAW lie in their establishment time, after-sales service, and market positioning. Here is a detailed introduction to the differences between GAC and FAW: 1. Establishment Time: FAW Toyota was established four years earlier than GAC Toyota. As a result, FAW Toyota may have a stronger foundation compared to GAC Toyota. Whether comparing annual car production or sales volume, GAC Toyota may not be on par with FAW Toyota, as there is a significant gap between the two. 2. After-sales Service: Compared to GAC Toyota, FAW Toyota may offer better after-sales service. 3. Market Positioning: GAC Toyota primarily targets the general public.

11

2

Share

How to Replace a Car Seat Belt?

Car seat belt replacement tutorial is as follows: 1. Remove the sensor wire of the safety buckle. 2. Remove the seat cushion and airbag. 3. Unscrew the bolts fixing the seat belt and remove the seat belt buckle. 4. Remove the seat cushion sensor, install the new safety buckle, and insert the bolts. 5. Install the weight sensor, fit the new retractor, and tighten it with a wrench. 6. Restore the seat cushion. The working principle of a car seat belt is: when the vehicle collides or emergency braking is applied, the pre-tensioning device instantly retracts, tightening the slack seat belt, firmly securing the occupant to the seat to prevent secondary collisions.

15

1

Share

What is the fuel consumption per 100 kilometers for the Lingpai?

The fuel consumption per 100 kilometers for the Lingpai is 4.0-5.0L. Currently, there are 10 models available for sale. Among them, the Lingpai 2022 CVT Flagship Edition, CVT Zhixiang Edition, and CVT Phantom Night Edition have a fuel consumption of 5L per 100 kilometers. The Rui·Phantom Night Edition, Rui·Comfort Edition, Rui·Flagship Edition, Rui·Zhixiang Edition, and Rui·Luxury Edition have a fuel consumption of 4L per 100 kilometers. The CVT Luxury Edition and CVT Comfort Edition have a fuel consumption of 4.9L per 100 kilometers. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, at 7.79L/100km. Among comparable models, the Civic 2022 has a combined fuel consumption of 5.5L/100km, the Xingrui 2021 has a combined fuel consumption of 6.7L/100km, and the Corolla 2021 has a combined fuel consumption of 5.6L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, and not easing off the throttle before encountering a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

16

0

Share

Why are automatic transmissions more expensive than manual transmissions?

Automatic transmissions are more expensive than manual transmissions mainly because the structure of an automatic transmission is more complex than that of a manual transmission, resulting in higher costs. The differences between automatic and manual transmissions can be summarized in the following three aspects: 1. Operation method: Manual transmissions require the driver to coordinate with the clutch for gear shifting, which demands extensive driving experience. In contrast, automatic transmissions operate based on preset programs without the need for manual intervention. 2. Structure: Manual transmissions rely entirely on gears and synchronizers for gear shifting, featuring a simple and reliable structure. Automatic transmissions, however, are complex devices that combine electronic, hydraulic, and mechanical components, making their structure more intricate. 3. Transmission efficiency: Manual transmissions use mechanical transmission, while automatic transmissions rely on hydraulic transmission via torque converters. This difference in working efficiency directly leads to variations in fuel consumption. For cars of the same brand and displacement, manual transmission vehicles can save up to 10% more fuel compared to automatic transmission vehicles.

8

5

Share

Where to Add Windshield Washer Fluid in Volkswagen?

What is the fuel tank capacity of the Wuling Rongguang 1.2 in liters?

What are the reasons for the Wuling Hongguang's air conditioning not cooling?

What is the difference between GAC and FAW?

How to Replace a Car Seat Belt?

What is the fuel consumption per 100 kilometers for the Lingpai?

Why are automatic transmissions more expensive than manual transmissions?

What is the fuel tank capacity of Dongfeng Fengxing?

What is the weight of the CR-V?

What are the functions of the Toyota Sienna buttons?

What are the differences between Trumpchi M6 and M6 Pro?