Where to Add Windshield Washer Fluid in the Sylphy?

What is the size of the wiper blades for the BMW 1 Series Sedan?

BMW 1 Series wiper blade size is 21/24. Installation method: Use the front of the car as the force guide, pull the wiper blade, and it will firmly lock when pulled to a certain position. Press the button on the wiper blade down, hold the wiper blade with your hand, and pull it outward with a little force to remove the old rubber strip. Release the two clips and pull out the original rubber strip. When installing the new rubber strip, you can offset the two metal pieces of the wiper blade up and down, and the first groove is the correct position for inserting the rubber strip. The installation process of the new rubber strip requires some manual skills and patience, install one side first and then the other. After the new rubber strip is successfully installed, follow the reverse order of the disassembly process, and the wiper blade can be easily reinstalled. Maintenance mode: First, turn off the vehicle, then power on for 5 seconds and turn off the power, lift the wiper lever to the top and hold it for 3 seconds, and the wiper blade will automatically stand up. After maintenance, pull the wiper lever downward to reset it.

16

4

Share

What is the tire model of the Mercedes-Benz A-Class?

The tire model of the Mercedes-Benz A-Class is 205/55r17. Tire replacement: First, park the vehicle on a level road. If changing the tire on the roadside, place a triangular warning sign at least 150 meters behind the vehicle. Then loosen all the tire nuts, loosening them diagonally. Place the jack under the vehicle's chassis support point and slowly raise the vehicle. Once raised to a certain height, the tire can be removed. If the tire fits tightly and cannot be removed directly, you can gently kick the tire with appropriate force. Place the new tire and manually secure the nuts. Do not overtighten the nuts to avoid stripping the threads; this operation should be performed when the tire is firmly on the ground. Determining whether replacement is needed: If the tire shows signs of aging, mainly on the sidewall and tread patterns. The tire wear has reached or even fallen below the minimum limit marker. Local bulges appear on the tire, which can easily cause a blowout due to uneven force distribution. Determine whether to repair or replace the tire based on the depth and area of the damage. If there are cracks on the tire sidewall, replacement is the only option. If the number of repairs exceeds a certain limit, the tire can no longer be used for driving.

1

Share

What to Do If a Vehicle Is Compulsorily Scrapped Due to Missing Annual Inspection?

What to do if a vehicle is compulsorily scrapped due to missing annual inspection: If the vehicle is scrapped before reaching the mandatory scrapping period, you can cooperate according to the law or file an administrative reconsideration. Annual inspection is a legal requirement, meaning it is mandatory, and every vehicle on the road must undergo inspection. To facilitate vehicle owners, the government has introduced a six-year exemption policy for new vehicles that meet the inspection requirements, allowing them to be exempt from annual inspections each year. Annual inspection procedures: First, after submitting the inspection application, the vehicle undergoes an on-site test. The vehicle is driven into the automatic testing area to sequentially check exhaust emissions, speed, lights, side slip, and chassis to ensure they meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and chassis number for accuracy. Then, the body appearance is inspected, including details like the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation condition, and the interior of passenger vehicles and wheels. Finally, the owner can obtain the inspection report and application form from the inspector. If all items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label. If any items fail, the owner must repair the vehicle and participate in a re-inspection until all items pass before proceeding with the visa procedures.

12

5

Share

What Causes Transmission Slippage?

Transmission slippage may be caused by wear, looseness, breakage, or loss of the gearshift lever's positioning pin, resulting in loss of control and erratic movement. Below are specific causes and solutions: Specific causes: Worn or failed interlock mechanism of the shift fork shaft; excessive wear and looseness of the gearshift lever ball head. Gears, gear rings, or gear sleeves becoming conical due to wear along the tooth length, causing disengagement under axial forces generated during operation. Excessive wear of shift fork shaft grooves, locking pins, and other components; bent or deformed shift forks, or excessive wear between working surfaces and gear ring grooves. Loose rear fixing nut of the second shaft, leading to axial movement. Loose or disassembled synchronizer locking pins, causing cone surface failure. Solutions: When a gear disengages, re-engage the gearshift lever into that gear, then remove the transmission cover to inspect gear meshing. If the gears mesh properly, the issue lies in the shift mechanism. Manually test the positioning device of the disengaging shift fork. If positioning is poor, remove the shift fork shaft and inspect the positioning ball and spring.

1

3

Share

What is the reason for the Jetta steering wheel being too light?

The reason for the Jetta steering wheel being too light is that after driving a certain mileage, the original wheel dynamic balance lead weights are lost, the wheel hub is deformed, and when driving at high speed, the front of the car shakes and the steering wheel vibrates. Correct hand position for steering: Turning the steering wheel one full turn is 360 degrees, and turning a quarter turn is 90 degrees. In fact, you can think of the steering wheel as a clock. The correct hand position is to place the left hand near the 9 o'clock position and the right hand near the 3 o'clock position. If you want to turn the wheel one full turn plus 90 degrees, turn the steering wheel one full turn and then an additional quarter turn. Steering techniques: When beginners practice steering, there is no need to worry about how many degrees the steering wheel is turned. Just follow the principle of "turn as much as you need to return, turn less and return less, turn slowly and return slowly, turn more and return more, turn quickly and return quickly." As for how much to turn, this can be judged by the steering wheel markings or by directly observing the direction of the car's front and body to make adjustments.

5

Share

What is the power rating of the BYD Yuan's charging station?

The power rating of the BYD Yuan's charging station is 7000 watts. The BYD Yuan can be charged via household single-phase AC charging, wall-mounted single-phase AC charging box, or single-phase AC charging station. It is beneficial for the battery to charge promptly when the power level drops to the warning red mark. Try to avoid charging only after the battery is completely depleted. Below is more information about the BYD Yuan: 1. Exterior: The design of the Yuan model is similar to other BYD new energy vehicles, featuring a stable design style with dynamic elements. The front face still adopts a purse-like shape, connecting with sharp and deep headlights, making the compact body appear to have a slender and elegant face. The body design presents an upward posture, with raised lines cutting through to create a dynamic atmosphere, and stylish taillights accentuating the stable rear wing. 2. Body dimensions: The body dimensions are 4360*1785*1680mm, with a wheelbase of 2535mm. 3. Powertrain: The BYD Yuan offers two models with a pure electric range of 305KM. Fast charging takes only 0.5 hours to reach 80% battery, while slow charging takes 7 hours. The maximum output power is 70KW/160KW, with peak torque reaching 180N.M/310N.M, fully meeting daily work and life needs.

16

2

Share

Where to Add Windshield Washer Fluid in the Sylphy?

What is the size of the wiper blades for the BMW 1 Series Sedan?

What is the tire model of the Mercedes-Benz A-Class?

What to Do If a Vehicle Is Compulsorily Scrapped Due to Missing Annual Inspection?

What Causes Transmission Slippage?

What is the reason for the Jetta steering wheel being too light?

What is the power rating of the BYD Yuan's charging station?

What is the difference between the window-sealed and non-window-sealed versions of Wuling Hongguang?

What are the reasons for both high and low beams not working?

Can I Apply for a Temporary License Plate on Sunday?

Is 2.2 bar tire pressure too low for a compact car?