Where to Add Windshield Washer Fluid in the Sagitar?

1 Answers
LeMargaret
07/29/25 7:10pm
In the Sagitar, the windshield washer fluid is added in the engine compartment. Open the engine hood, and in the lower right corner of the engine compartment, you will find a white cap. This is where you add the windshield washer fluid. Simply open the white cap and pour in the fluid. The maximum capacity is 1.5 liters. Below is some related information about Sagitar windshield washer fluid: 1. Summer-specific: This type of windshield washer fluid contains additional insect remover, which helps quickly remove insect residue from the windshield. 2. Standard winter windshield washer fluid: Also known as antifreeze windshield washer fluid. This type ensures that the fluid does not freeze or damage car components even when the outside temperature drops below -20°C. 3. Special antifreeze windshield washer fluid: This type remains unfrozen even at -40°C, making it suitable for extremely cold regions.
Was this review help?
1
2
Share
More Forum Discussions

What is the weight of the Wuling Hongguang S3?

The weight of the Wuling Hongguang S3 ranges from 1380 to 1554 kg. The Wuling Hongguang S3 is a model under SAIC-GM-Wuling, with body dimensions of 4655mm in length, 1735mm in width, and 1780mm in height, a wheelbase of 2800mm, and a fuel tank capacity of 49 liters. In terms of suspension, the front suspension of this vehicle is a MacPherson independent suspension, while the rear suspension is a spiral spring non-independent suspension. Externally, the Wuling Hongguang S3 features a brand-new design, utilizing smooth, full-bodied lines and a layered design to highlight its three-dimensional and powerful appearance, with local designs that are robust and dynamic.
7
1
Share

Where is the OBD interface located in the Envision?

The OBD interface in the Envision is located under the steering wheel on the driver's side of the dashboard. OBD is a system that monitors the vehicle's operating status and provides timely feedback on abnormalities, primarily focusing on the engine condition and exhaust emissions. The Envision is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. In terms of suspension, the vehicle features a front MacPherson independent suspension and a rear multi-link independent suspension. The Envision measures 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters.
15
5
Share

Is it necessary to install an engine guard plate for a new car?

It is necessary to install an engine guard plate for a new car. The engine guard plate is generally installed under the chassis at the front of the car to prevent the engine from being bumped. There are several types of engine guard plates: 1. Iron guard plate; 2. Aluminum alloy guard plate; 3. Plastic-steel guard plate; 4. Plastic guard plate. The reasons for installing an engine guard plate are: 1. The engine is one of the core components of a car. Installing a guard plate outside it can block the impact force generated by flying stones hitting the engine when driving on uneven road sections; 2. During the use of the vehicle, it will encounter a lot of mud or dust. When driving in rainy weather, it is easy to corrode the car's chassis. After installing the engine guard plate, the engine can be better protected.
14
1
Share

What is the correct way to start the 10th-generation Accord?

The correct way to start the 10th-generation Accord is: First, press the start button once. After the ACC light turns on, press the start button again. At this point, the one-touch start button will turn green, and the vehicle will perform a self-check. Once the self-check is complete, step on the brake and press the one-touch start button once more to start the vehicle. The 10th-generation Accord is a mid-size sedan under GAC Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. In terms of power, the 10th-generation Accord is equipped with a 1.5-liter four-cylinder turbocharged engine, delivering a maximum power of 130kW and a maximum torque of 230Nm, paired with a continuously variable transmission (CVT).
10
0
Share

What does the car air conditioner's internal circulation mode mean?

Car air conditioner's internal circulation mode refers to closing the airflow channel between the inside and outside of the vehicle, preventing external air from entering the cabin, and only circulating the existing air inside the car. The functions of car air conditioning are: 1. Cooling, heating, ventilating and purifying the air inside the vehicle; 2. Providing a comfortable environment for passengers, reducing driver fatigue and improving driving safety. The automotive air conditioning system, referred to as car AC, consists of refrigeration system, heating system, air purification device and control system. It is used to regulate and control the temperature, humidity, air cleanliness and airflow inside the vehicle compartment to maintain optimal conditions.
1
3
Share

How to Remove the Rearview Mirror of Baojun 730?

The method to remove the rearview mirror of Baojun 730 is as follows: First, use a flat-head screwdriver to pry open the edge between the mirror housing and the base of the rearview mirror to create a gap. Press down on the lower part of the rearview mirror with your hand, then remove the flat-head screwdriver. Insert the flat-head screwdriver into the gap between the right side of the mirror and the housing to pry open the internal clips. Once the clips securing the rearview mirror are released, the mirror can be removed. The Baojun 730 is a 5-door, 7-seat MPV under SAIC-GM-Wuling, with dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, a wheelbase of 2750mm, a fuel tank capacity of 52 liters, and a curb weight of 1420kg.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.