···
Log in / Register

Where to Add Windshield Washer Fluid in the Leiling?

5 Answers
SanLilah
07/29/2025, 10:51 PM

Leiling's windshield washer fluid filling location: Open the engine hood, and at the lower left corner, there is a cap with a windshield wiper spray symbol—this is the filling port. Open the cap and add purified water or windshield washer fluid. Automobile windshield washer fluid, commonly known as windshield fluid, is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The Leiling is a compact sedan based on Toyota's MC platform, deeply customized for Chinese consumers. The car measures 4640 mm in length, 1780 mm in width, and 1455 mm in height, with a wheelbase of 2700 mm. In terms of suspension, the Leiling features a MacPherson strut front suspension and a torsion beam rear suspension.

Was this review help?
15
2
Share
NoahRose
08/16/2025, 05:11 AM

Adding windshield washer fluid to a Leiling is very simple. Open the hood release switch under the left side of the driver's seat, hear the click, then go to the front of the car, reach into the hood gap, feel for a latch and lift it up to open the hood. The washer fluid reservoir is located behind the left headlight, with a blue plastic cap marked with a wiper symbol. Just pour in the $5 two-bottle washer fluid from the supermarket until you see the liquid level—don’t overfill, as there’s a max fill line at the opening. My family’s Leiling gets its washer fluid sprayed recklessly by my son every summer, so I always buy the family-sized packs. Remember, never pour it into the pink coolant reservoir, which is positioned in the middle and looks completely different—mixing them up can cause serious problems.

Was this review help?
11
5
Share
Expand All
McReese
10/21/2025, 04:41 AM

You don't need to go to a repair shop to add windshield washer fluid. Just look for the hood release under the steering wheel on the driver's side, pull it, and you'll hear a pop sound. Then go to the front of the car, lift the hood, and the blue-capped reservoir in the left corner is where you add it. It's recommended to keep a bottle of concentrated windshield washer fluid in your car—just mix it with tap water before use. Especially in summer when there's more bird droppings and tree sap, you'll use more fluid and go through it quickly. Last time I ran out of washer fluid on my way home from overtime work, I used mineral water as a temporary solution, though its cleaning power isn't as good. Remember to top it up after rainy days—when the car in front splashes mud, your entire windshield gets covered in spots. A few sprays will clear it right up.

Was this review help?
2
4
Share
Expand All
Lawson
12/04/2025, 09:21 PM

Open the front hood and locate the blue cap with the windshield wiper icon, which is on the left side of the front of the vehicle. Purchase dedicated windshield washer fluid and fill it up, being careful not to overflow. In winter, switch to an antifreeze-type windshield washer fluid.

Was this review help?
10
1
Share
Expand All
DeJudah
01/24/2026, 10:44 PM

I'm in the habit of checking the windshield washer fluid monthly. In the Leiling, the reservoir is located behind the left headlight—just lift the hood and look for the blue plastic tank with a windshield washer symbol. When refilling, avoid mixing different brands of washer fluid, as this can cause flocculation and clog the nozzles. Last week, my friend's car had clogged nozzles and ended up costing 200 yuan to replace them. Use a funnel when pouring to prevent spills; splashing onto electrical components can corrode the connectors. In spring and autumn, standard 0°C+ washer fluid is sufficient, but in sub-zero regions like Northeast China, you must use -25°C antifreeze type.

Was this review help?
7
2
Share
Expand All
More Forum Discussions

Where to Add Coolant for Haval H2s

Haval H2S coolant is added from the coolant reservoir. The coolant reservoir is located in the engine compartment and can be seen by opening the engine hood. Filling method: When the engine is cold, open the hood and locate the engine's coolant reservoir. Unscrew the reservoir cap and open the drain valve (to release the coolant), then clean the inside. Then directly refill the reservoir with the same specification of coolant until the liquid level reaches the maximum mark. Finally, after adding the coolant, simply close the reservoir cap. Precautions: Be careful not to spill the coolant during the filling process. If it comes into contact with the exhaust pipe, it may produce unpleasant odors or even cause smoke and fire. Therefore, if it contacts the exhaust pipe, wipe it off immediately with a wet cloth to prevent sudden ignition.
11
1
Share

Is the displacement of the Mercedes-Benz E300L 3.0?

The displacement of the Mercedes-Benz E300L is 3.0. Classification of car displacement: In China, the classification of passenger cars is determined by the size of the displacement. The displacement of micro cars is less than or equal to 1.0L; the displacement of compact cars ranges from 1.0 to 1.6L; the displacement of mid-size cars ranges from 1.6 to 2.5L; the displacement of executive cars ranges from 2.5 to 4.0L; and the displacement of luxury cars is greater than 4.0L. Meaning of E300: The "300L" in Mercedes-Benz E300L, where L is the abbreviation of the English word "long," meaning the extended version, and 300 is a model number of Mercedes-Benz. This number represents a displacement of 3.0 in Mercedes-Benz, and the E-Class is a mid-range model in Mercedes-Benz's sedan lineup.
13
4
Share

How to Clean Dirty Car Seat Belts?

Seat belts can be cleaned by evenly applying a cleaning agent or soap, waiting for a short while, and then scrubbing with a soft-bristled brush such as a shoe brush. Below is some information about car seat belts: Definition: Car seat belts are the primary safety devices designed to protect adult passengers. In the event of a collision or sudden braking, they prevent the driver or passengers from secondary impacts with objects like the steering wheel or windshield, which could cause severe injuries. Function: Seat belts secure the occupants to their seats, significantly reducing the distance they might be thrown forward, thereby minimizing potential injuries.
16
0
Share

How Often Should the Three Filters of BMW 3 Series Be Replaced?

BMW's three filters should be replaced every 15,000 kilometers, which includes three oil changes and one filter replacement. Meaning of the three filters: The three filters in a car refer to the air filter, fuel filter, and oil filter. Engine maintenance: What is commonly referred to as maintenance usually pertains to engine maintenance. The engine requires three essential substances to operate: oil, fuel, and air. None of these are pure and contain some impurities, which can increase engine wear and shorten its lifespan. Therefore, these impurities must be filtered out to prevent them from entering the engine. This is why various filtration devices, such as air filters, oil filters, and fuel filters, are used.
5
2
Share

How many kilograms can the trunk of the Lavida carry?

The maximum load capacity of the Lavida's trunk is approximately 500 kilograms. Trunk load capacity: It varies depending on the brand and model of the car, and the number of passengers also has an impact. Luggage weight = total vehicle weight - curb weight - driver and passenger weight. For most 1.5L sedans, with four passengers, you can carry an additional 100 kilograms of luggage. Under normal circumstances (with only the driver), the trunk can hold no more than 200 kilograms. Carrying excessively heavy loads for a long time will significantly increase fuel consumption, reduce vehicle stability, and accelerate tire wear. Generally, try not to carry too many items. Dimensions of the Lavida's trunk: The trunk dimensions are 580 millimeters in height, with a minimum width of 1040 millimeters and a maximum width of 1430 millimeters, and a length of 1100 millimeters. With the rear seats folded down, the length can reach up to 1910 millimeters, providing a trunk volume ranging from 435 to 1342 liters, which is more than sufficient for family use.
9
0
Share

Where is the BMW 3 Series GT produced?

The BMW 3 Series GT is produced at the Dingolfing plant in Germany. Dingolfing Plant in Germany: The Dingolfing plant is located in the eastern part of Germany, near the Mulde River in Freiberg, approximately 48 kilometers west of Dresden. Introduction to the BMW 3 Series GT: The BMW 3 Series GT is a new model launched by BMW at the Geneva Motor Show, and it is the second hatchback-style sedan following the BMW 5 Series GT. On June 1, 2016, BMW officially released the official images of the new 3 Series GT. The 3 Series GT will be available in three powertrain options—320i, 328i, and 335i—across four models: the 320i Base, 320i Design Line, 328i Design Line, and 335i Design Line.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.