Where to Add Windshield Washer Fluid in the 10th Generation Accord?
3 Answers
In the 10th generation Accord, the windshield washer fluid is added in the small blue-capped container located on the left side of the engine compartment. The container with the front windshield spray symbol on its cap is the washer fluid reservoir. Open the cap and pour in the antifreeze washer fluid, but avoid overfilling - just enough to slightly see the fluid level inside is sufficient. During autumn and winter seasons, the washer fluid should possess excellent cleaning and antifreeze properties. It should also provide protective benefits for both the windshield and wiper blades, offering care and protection for the vehicle during normal usage. Some premium washer fluids contain specially formulated surfactants and additives that can repair minor scratches on the windshield surface by forming a unique protective film, achieving comprehensive care for the windshield.
As an owner of the tenth-generation Accord, I've been driving this car for a while. The windshield washer fluid reservoir is located in the engine compartment. Specifically, you need to open the hood and look carefully on the left side near the bottom of the windshield. There's a translucent plastic tank with a cap that's usually blue or has a windshield and wiper icon on it - you can spot it at a glance. Just unscrew the cap and pour the fluid in directly. Don't use tap water or mix random dish soap, as this may clog the nozzles over time or cause freezing issues in winter. It's best to use automotive-grade windshield washer fluid for better performance. If the fluid level gets too low, the dashboard might light up to remind you to refill, so I recommend checking it every car wash or at least once a month. DIY refilling is simple and cost-effective, but pour slowly to avoid spills - you don't want to make a mess. Paying attention to these details helps ensure safer driving.
I often help friends with minor car maintenance, and adding windshield washer fluid to the 10th-generation Accord is quite straightforward. Pop the hood, glance toward the driver's side, and near the corner by the windshield, you'll usually spot a light-colored small reservoir with a clear wiper symbol on the cap. Simply twist off the cap and pour in the washer fluid directly. Remember to pour slowly to avoid splashing—using dedicated fluid is recommended as it provides antifreeze protection and keeps the glass clean. Topping it up regularly is easy; just refill when the level gets low to ensure safe driving in rain or snow. Handling this yourself saves time and money compared to visiting a repair shop, and maintaining this habit can extend your car's lifespan. Simple yet practical—definitely worth learning.
