Where to Add Windshield Washer Fluid in Sagitar?

What are the maintenance schedule items for the Emgrand GL?

The maintenance schedule items for the Emgrand GL include: 1. Engine oil replacement; 2. Oil filter replacement; 3. Transmission oil replacement; 4. Air filter cleaning; 5. Fuel filter cleaning; 6. Brake fluid replacement; 7. Spark plug replacement. Taking the Emgrand GL 2021 model as an example, its body dimensions are 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 55 liters. The Emgrand GL 2021 model is equipped with a 1.4 turbocharged engine, delivering a maximum horsepower of 141, a maximum power of 104 kilowatts, and a maximum torque of 235 Newton-meters.

16

1

Share

Do I Need to Replace the Antifreeze in a New Car During Winter?

Generally, there is no need to replace the antifreeze in a new car during winter. Under normal circumstances, antifreeze is typically replaced every two years, so a new car may not require antifreeze replacement. However, the decision should be made flexibly based on the vehicle's usage environment. It is recommended that car owners consult relevant personnel at the 4S store in a timely manner to avoid vehicle issues during winter. Antifreeze prevents the coolant from freezing when the car is parked in cold winter, which could otherwise cause the radiator to crack or the engine cylinder block to freeze. Its full name is antifreeze coolant. Many people think that antifreeze is only used in winter, but in fact, it should be used all year round. Before adding car antifreeze, it is necessary to check whether there is any leakage in the car engine's cooling system. If no leakage is found after inspection, the car owner can proceed with the next steps.

12

1

Share

In which country is Michelin tires located?

Michelin tires are in France. Tires are round, elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are installed on metal rims to support the vehicle body, absorb external impacts, ensure contact with the road surface, and maintain driving performance. Tire maintenance methods include: 1. Regularly check tire pressure; 2. Inspect tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Remove foreign objects like stones, metal pieces, or nails from tire treads; 4. Perform wheel alignment or tire balancing. The hazards of unstable tire pressure are: 1. Reduced friction and adhesion, affecting braking performance; 2. Causing steering wheel vibration or deviation, reducing driving comfort; 3. Accelerating uneven wear on the central tread pattern.

14

1

Share

What does 'int' mean in Chinese on a car?

In a car, 'int' in Chinese refers to intermittent operation, which is controlled by an intermittent relay. It utilizes the return switch contacts of the motor and the charge-discharge function of the relay's resistor and capacitor for operation. The functions of various buttons in a car are categorized as follows: 1. Start-stop button: Automatically turns off the engine during temporary stops and restarts it when the vehicle needs to proceed; 2. Fuel tank opening button: Used to remotely open the fuel tank cap from inside the car; 3. EPS switch: Turns the vehicle's electronic stability program on or off; 4. Central locking button: Controls the central locking system of the vehicle; 5. Headlight cleaning button: Controls the automatic cleaning function of the headlights.

1

5

Share

What is the rear suspension type of the Baojun RC6?

The rear suspension type of the Baojun RC6 is a torsion beam non-independent suspension. The stability and comfort of the torsion beam non-independent suspension are generally average, so it is usually equipped in mid-to-low-end vehicles. The torsion beam suspension is a type of rear suspension for cars, which connects the two rear wheels of the car through a torsion beam, thereby reducing the body's up-and-down bouncing and swaying, maintaining the car's stability. The Baojun RC6 adopts a hatchback design, with a large hexagonal grille complemented by irregular starry dotted decorations, forming a highly recognizable front face together with the Baojun logo. The grille's bottom baffle and the black sporty front lip use the same material, creating a natural transition with the car's front face.

18

3

Share

What is the engine oil specification for Toyota Camry?

Toyota Camry uses engine oil specifications 0W20 and 5W20. The steps for oil change are: 1. Lift the vehicle, remove the undercover, and place a container under the drain plug; 2. Loosen the drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the drain plug after complete drainage and wipe with tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil using a funnel aligned with the filler port. Taking the 2019 Toyota Camry as an example, its body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60L, and curb weight 1530kg.

3

1

Share

Where to Add Windshield Washer Fluid in Sagitar?

What are the maintenance schedule items for the Emgrand GL?

Do I Need to Replace the Antifreeze in a New Car During Winter?

In which country is Michelin tires located?

What does 'int' mean in Chinese on a car?

What is the rear suspension type of the Baojun RC6?

What is the engine oil specification for Toyota Camry?

What engine does the Wuling Capgemini use?

What are the differences between Honda Accord and Buick Regal?

Why does the car stall when stepping on the accelerator?

What Does the Automobile Three Guarantees Policy Cover?