Where to Add Windshield Washer Fluid in Civic?

What is the reason for the car body brushing the line during parallel parking exit?

The reason for the car body brushing the line during parallel parking exit is that the steering wheel is turned too late, causing the car body to get too close to the sideline and resulting in brushing the line. The correct method for parallel parking exit: After hearing the voice prompt, press the clutch and brake, shift to first gear, turn on the left turn signal, turn the steering wheel fully, and slowly exit the parking space. When the right front corner of the engine hood touches the right roadside line (this is the first point), straighten the steering wheel and continue moving forward. When one-third of the left side of the engine hood aligns with the yellow line (this is the second point), turn the steering wheel one full turn to the right; let the car go around the corner of the parking space and exit. When the car body is parallel to the road, straighten the steering wheel to the left and exit the parallel parking test area. Precautions for parallel parking exit: During the parallel parking exit process, pay attention to controlling the clutch; the speed should be slow, but you must not stop midway. The timing of turning the steering wheel must be accurate; otherwise, missing the timing can easily lead to brushing the line. Be sure to slow down, stabilize the clutch, and maintain a steady speed. When reversing into the parking space, the first full turn to the right should be done only after the left corner of the parking space disappears from the right rearview mirror; otherwise, the front wheels may brush the line during reversing or exiting. Note the penalty points for parallel parking exit: brushing the corner during exit deducts 10 points; the tires touching the lane sideline deducts 10 points; stopping midway results in disqualification.

17

5

Share

Can You Drive on the Highway with Items on the Roof of an SUV?

SVU roof racks can carry luggage on the highway, but there are height restrictions. Here are some relevant details: 1. Regulations on vehicle cargo: The load must not exceed the maximum load capacity specified on the vehicle's registration certificate, and the length and width of the load must not extend beyond the vehicle body. Passenger vehicles are not allowed to carry cargo except for items on external roof racks and built-in luggage compartments. The width of cargo on a three-wheeled motorcycle must not exceed the width of the vehicle body. 2. SUV: Stands for Sport Utility Vehicle, which is different from Off-Road Vehicles (ORV) designed for rough terrain. The full name of an SUV is sport-utility-vehicle or suburban-utility-vehicle, meaning a suburban multi-purpose vehicle. It combines the space functionality of a station wagon with the off-road capability of a pickup truck.

3

1

Share

Can the Logo of an Old Baojun Car Be Replaced?

It is possible to replace the logo of an old Baojun car, but there is a chance that it may not pass the annual inspection. It is recommended to consult the local vehicle management office before making any changes to ensure that it is allowed. Do not modify the logo without authorization. The car logo refers to the emblem of various car brands, mainly used for vehicle identification, and these emblems often represent the automobile manufacturers. Every car should have its own logo, which facilitates sellers, users, maintenance personnel, and traffic management departments in identifying the vehicle. Taking the Baojun 510 as an example, its body dimensions are 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm.

8

4

Share

How to Determine if a Car is New

Methods to determine if a car is new: 1. Check the car's manual, certificate of conformity, and factory certificate to verify the production date. If the production date is too old, it might be a used car; 2. Check the odometer of the new car, as it records the mileage the car has traveled; 3. Inspect the wear and tear on the car tires, especially the presence of tire hairs. If they are worn, it indicates an old car; 4. Check if the paint color matches the description in the manual. Additionally, open the car door to see if the exterior and interior paint colors match. If it's an old car, the paint will show signs of aging and color difference; 5. Examine the car's exhaust pipe by touching inside to see if it's black. A new car's exhaust pipe should be very clean.

3

Share

Can You Change Lanes in a Tidal Flow Lane?

Tidal flow lanes allow lane changes, as they are essentially variable lanes. Introduction to Tidal Flow Lanes: Due to the "tidal phenomenon" in traffic—where morning rush hours see heavier inbound traffic with lighter outbound flow, while evenings experience the opposite, exacerbating congestion—transportation authorities have implemented variable lanes as part of traffic management solutions. Specifically: during morning peak hours when inbound traffic is heavier, the number of inbound lanes is increased while outbound lanes are reduced; conversely, during evening peaks with heavier outbound traffic, outbound lanes are increased and inbound lanes are decreased. Real-World Operation: Traffic police can adjust lane directions in real-time using handheld remote controls based on on-site traffic conditions. For intersections with predictable flow patterns and no emergencies, officers may pre-program fixed timing for automatic sign changes. Additionally, control centers can monitor intersection conditions via instruments and remotely adjust signage as needed. At intersections equipped with networked traffic signals, an automated recognition system can identify conditions and regulate lanes autonomously.

10

2

Share

Where is the Corolla's car seat interface located?

The Corolla is equipped with ISOFIX interfaces, which are generally located in the gaps between the backrest and the seat cushion of the left and right rear seats. Below is some relevant information about the ISOFIX car seat: 1. Function: ISOFIX is a new standard for installing child seats in cars. Its purpose is to make the installation of child seats quick and simple, with a rigid connection for enhanced safety. Child seats equipped with ISOFIX can be easily secured to the car's ISOFIX interface, improving safety. 2. Child Seats: Additionally, LATCH is a child seat anchoring system established in the United States, and LATCH interfaces can also accommodate ISOFIX interfaces. ISOFIX interfaces are pre-installed in cars during manufacturing. Child seat manufacturers install ISOFIX connectors on their seats, allowing ISOFIX-compatible child seats to be easily secured to the car's ISOFIX interface.

12

0

Share

Where to Add Windshield Washer Fluid in Civic?

What is the reason for the car body brushing the line during parallel parking exit?

Can You Drive on the Highway with Items on the Roof of an SUV?

Can the Logo of an Old Baojun Car Be Replaced?

How to Determine if a Car is New

Can You Change Lanes in a Tidal Flow Lane?

Where is the Corolla's car seat interface located?

Why does the phone play music but the car doesn't when connected via Bluetooth?

What is the bulb model of the Venucia T60?

What is the trunk size of the Nissan Bluebird?

What Causes Engine Idle Vibration After Water Rinse?