Where to Add Windshield Washer Fluid in Civic?

1 Answers
DiKeegan
07/24/25 11:47pm
Civic adds windshield washer fluid in the washer fluid reservoir under the right front fender. The washer fluid filler port is located next to the right front fender and can be seen after opening the engine hood. Windshield washer fluids are divided into: summer windshield washer fluid and winter antifreeze washer fluid, with the difference being their freezing points. Precautions for using windshield washer fluid: 1. Do not add engine antifreeze to the windshield washer reservoir as it may damage the vehicle's paint; 2. Do not use vinegar and water solutions as they may damage the windshield washer pump; 3. Do not use water as a car window cleaner since water contains minerals that can form hard mineral particles, which may scratch the glass when the wipers operate and are also harmful to the wipers. Civic has launched multiple models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedan versions.
Was this review help?
15
1
Share
More Forum Discussions

How to Adjust the Reversing Camera Guide Lines on a BMW?

The method to adjust the reversing camera guide lines on a BMW is as follows: 1. First, activate the reversing camera interface, turn the iDrive knob to the left, and select the menu bar on the left side of the reversing camera interface; 2. Rotate the iDrive to select, then press the iDrive to open the guide line function for adjustment. BMW models include: BMW 3 Series, BMW 7 Series, BMW X5, BMW X1, BMW 1 Series, etc. Taking the BMW 5 Series 2021 model as an example, its body dimensions are: length 5106 mm, width 1868 mm, height 1500 mm, and the wheelbase is 3105 mm.
7
5
Share

What is the shelf life of car antifreeze?

Car antifreeze has a shelf life of two years, and its functions are: 1. To provide freeze protection for the engine against low-temperature environments; 2. To prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head when the car is parked in cold winter; 3. To provide efficient heat dissipation. The full name of antifreeze is antifreeze coolant, which is a coolant with antifreeze properties. It is categorized into: ethanol-based, glycerol-based, and ethylene glycol-based. Antifreeze should be replaced approximately every 2 years or 60,000 kilometers. Failure to replace it for a long time can lead to a decline in the quality of the antifreeze, reducing its internal anti-corrosion properties and causing damage to the radiator and pipes.
3
0
Share

What are the symptoms of a dirty car fuel injector?

Symptoms of a dirty car fuel injector include: increased engine noise, unresponsive throttle, uneven acceleration, and minor idle shaking. The fuel injector is located on the intake manifold of the direct-injection cylinder block. It is a simple solenoid valve that operates as follows: when the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection hole. Fuel is then sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a fine mist for optimal combustion. The cleaning method for a car fuel injector is: 1. Hang the cleaning device on the front hood of the car; 2. Locate the engine's fuel supply and return lines; 3. Disconnect the return line from the engine and use a suitable plug to block it; 4. Connect the supply line to the cleaning device's outlet line; 5. Open the fuel tank cap, remove the fuel pump fuse to stop the fuel pump, and the cleaning process is complete.
20
2
Share

Is the Leopard Q6 an off-road vehicle?

The Leopard Q6 is an off-road vehicle with the following dimensions: length 4890mm, width 1795mm, height 1940mm, wheelbase 2725mm, minimum ground clearance 230mm, fuel tank capacity 92L, front track 1740mm, and rear track 1490mm. The Leopard Q6 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 130kW and a maximum torque of 250Nm, paired with a 6-speed automatic transmission. It features a front suspension system with double wishbone independent suspension and a stabilizer bar, and a rear suspension system with longitudinal leaf spring non-independent suspension.
3
1
Share

What are the three filters in a car?

Car three filters refer to the oil filter, cabin air filter, and engine air filter. The oil filter, also known as the oil purifier, functions to remove impurities from the engine oil and deliver clean oil to various lubrication points. The roles of the cabin air filter include: 1. Ensuring a tight fit between the filter and its housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and abrasive particles from the air; 3. Absorbing moisture, soot, ozone, odors, and carbon oxides from the air; 4. Preventing car windows from fogging up, thereby maintaining clear visibility for drivers and passengers and ensuring driving safety; 5. Keeping the cabin air clean and free from bacteria. The engine air filter's purpose is to allow the engine to efficiently intake fresh and clean air, preventing dust and sand from entering the cylinders and causing wear, thus ensuring the engine operates normally.
19
1
Share

What are the body dimensions (length, width, height) of the BMW 3 Series?

The body dimensions of the BMW 3 Series are: length 4719mm, width 1827mm, height 1459mm, with a wheelbase of 2851mm. The fuel tank capacity is 59 liters, and the front and rear tire specifications are 225/45R18. The body structure is a 4-door, 5-seater sedan. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115kW at 4500 to 6500 rpm, and a maximum torque of 250Nm. It is paired with an 8-speed automatic transmission. The front suspension features a double-joint spring strut front axle, while the rear suspension is a multi-link independent suspension.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.