Where to Add Windshield Washer Fluid in Baojun 510?
3 Answers
Open the engine hood, and you will find a white cap in the lower right corner of the engine compartment. This is where you add windshield washer fluid. Simply open the white cap and pour in the washer fluid. The maximum capacity is approximately 1.5 liters. Windshield washer fluids are mainly categorized into three types: 1. Summer-specific fluid. This type contains additional insect-removing agents to quickly clean insect residues on the windshield. 2. Standard winter washer fluid. Also known as anti-freeze washer fluid, it ensures the fluid does not freeze and damage car components at temperatures below -20°C. 3. Ultra anti-freeze washer fluid. This type remains unfrozen even at -40°C, making it suitable for extremely cold regions in northern China.
I remember the first time I added windshield washer fluid to my Baojun 510, I was so flustered that I almost poured it in the wrong place. Later, I realized it's located right at the front under the hood. At the bottom of the windshield, near the center, there's a small blue cap with a water droplet or wiper icon printed on it. The location is easy to find, but you need to be careful not to mistakenly add it to the coolant reservoir. I always wait until the engine has completely cooled down before operating, otherwise the hot engine could burn my hands. Regular cleaning fluid from the supermarket works fine for the washer fluid, but remember to switch to an antifreeze type in winter to prevent freezing. I usually check the fluid level when washing my car every month, and top it up if it's below the marked line to maintain clear visibility. When adding the fluid, don't pour too quickly—use a small funnel to prevent spills and keep the engine compartment tidy. Developing these small habits ensures both safety and peace of mind.
As a car enthusiast, I always ponder over the design when adding windshield washer fluid to my Baojun 510. The reservoir is located at the front of the engine compartment, right below the windshield, with a clearly marked blue or translucent plastic cap for easy identification. The washer nozzle system is connected nearby, so using standard washer fluid helps prevent clogging. When refilling, I make sure the engine is off and cooled down, using the correct fluid without mixing tap water to avoid component damage. Regular nozzle cleaning is also necessary to prevent dirt buildup, followed by a test spray after refilling. Before every long trip, I check the fluid level and top it up if low – this ensures clear visibility and stable driving. Though these maintenance details seem minor, they significantly impact overall performance and driving safety.
