Where to Add Windshield Washer Fluid in an Audi?

2 Answers
SanAdriana
07/25/25 2:55am
Located at the upper left of the engine compartment, behind the hood hinge. Look for a blue cap with a windshield washer symbol, then open the cap to add fluid. Function of Windshield Washer Fluid: Windshield washer fluid not only cleans dust adhered to the windshield but also provides protective properties for the windshield and wipers. Some branded washer fluids, formulated with multiple surfactants and additives, uniquely repair minor scratches on the windshield surface by forming a protective film, offering comprehensive care for the windshield. Specially added corrosion inhibitors ensure no harm to various metals, safeguarding the car's paint, wipers, and rubber components. Choosing Windshield Washer Fluid: Due to different freezing points, washer fluids are categorized into winter and summer types. First, autumn and winter washer fluids should excel in cleaning and antifreeze performance. Winter washer fluid selection is based on antifreeze properties, choosing a product with a freezing point at least 10 degrees below the local minimum temperature. Otherwise, it may cause the fluid to freeze or damage the washer pump. Select according to local temperatures; reputable brands categorize their products by temperature ranges for seasonal selection.
Was this review help?
14
3
Share
LeCassidy
08/10/25 4:46pm
I've been driving an Audi for a while now, and at first, I didn't know where to add water for the wipers either. I later found out by asking a friend. Adding water actually refers to the location for adding windshield washer fluid, which is inside the engine compartment. You open the front hood and look for a small container near the engine with an icon resembling water spraying on a windshield, usually labeled "Washer Fluid" or something similar. I've added it myself a few times: prepare dedicated windshield washer fluid—you can't just use plain water, as it can freeze in winter or clog the nozzles. When pouring, don't fill it to the brim; leave some air space, then screw the cap on tightly. The location might vary slightly between different Audi models like the A4 or Q5, but it's always in the engine compartment and designed quite intuitively. If you're unfamiliar, check the manual or online tutorials first to avoid adding the wrong fluid and affecting the system. Remember to check the fluid level regularly—if it's too low, the wipers won't spray enough water, which can obscure your vision while driving and be quite dangerous. It's a simple operation to ensure clear visibility, and even beginners can handle it.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Why is Heat Shrinking Necessary for Car Window Tinting Film?

The primary reason lies in the manufacturing process of explosion-proof films. Since the electroplating direction is fixed during production, the shrinkage direction of the film during installation and heat shaping is predetermined. Bubbles can only be smoothly flattened by following this shrinkage direction to avoid creases, hence leading to horizontal-cut or vertical-cut heat shrinking methods. Below are relevant explanations: 1. Narrower sides: Generally, car windows have longer top/bottom edges and narrower left/right sides. Horizontal cutting distributes bubbles evenly along both sides, creating longer bubble lines that complicate installation. 2. Dry shrinking technique: When applying dry shrinking or other special techniques, the windshield typically uses horizontal-cut heat shrinking. This is because most current vehicle models have windshields exceeding 75cm in vertical height. Vertical cutting would leave excessive leftover material that often gets wasted due to prolonged improper storage or difficulty finding matching vehicle models – particularly costly for premium films. Thus, horizontal cutting better optimizes material cost efficiency.
6
2
Share

What are the reasons for the Wuling Rongguang's spark plugs being flooded?

The reasons for the Wuling Rongguang's spark plugs being flooded are: 1. Overly rich air-fuel mixture, high oil level or clogged air filter, abnormal carburetor supply; 2. Spark plug misfire, leakage, abnormal ignition by the igniter, abnormal high-voltage coil, weak spark, as well as faults in the charging coil and trigger coil inside the magneto, and short circuit or leakage in the ignition switch can also cause this. Taking the 2019 Rongguang V as an example, its body dimensions are: length 4415mm, width 1665mm, height 1850mm, with a wheelbase of 2720mm. The 2019 Rongguang V has a MacPherson strut independent front suspension and a leaf spring non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 99ps, maximum torque of 140nm, maximum power of 73kw, and is paired with a manual transmission.
5
1
Share

What is the zero-whole ratio of the Audi A4L?

The 11th edition of the auto zero-whole ratio data has been officially released. The zero-whole ratio 100 index is 336.79%, an increase of nearly 11 percentage points compared to the 10th edition's 325.83%. This marks the first time the zero-whole ratio 100 index has surpassed 330% since its release. The commonly used parts burden 100 index stands at 16.16, continuing to show an upward trend. More information about the Audi A4L is as follows: 1. Exterior: Fashionable and dynamic, with smooth lines and a comfortable chassis. The chassis is 13 millimeters higher than the European version of the A4, achieving better comfort and passability. 2. Interior: It still adopts Audi's family-style design, with exquisite craftsmanship and high-quality materials. A large number of parts shared with the A6L can be found on the A4L's center console. The slightly driver-tilted black center console and the textured black interior give a cool feeling, as if sitting in a sports car. The interior leans more towards comfort, with the entire lineup featuring a light gray tone complemented by imitation wood trim, appearing very steady and elegant.
16
5
Share

What is the ground clearance of the Song Plus DM-i?

The minimum ground clearance of the Song Plus DM-i is 160 millimeters. The minimum ground clearance of the Song Plus DM-i refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Song Plus DM-i improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. As the second model equipped with BYD's DM-i Super Hybrid System, the Song Plus DM-i offers two versions with pure electric ranges of 51 km and 110 km, featuring battery packs of 8.3 kWh and 18.3 kWh, respectively. Generally, sedans have a ground clearance between 110 mm and 150 mm, while SUVs range from 200 mm to 250 mm. However, the ground clearance of the Song Plus DM-i is not static; it also depends on the load condition. Therefore, changes in the vehicle's load should be considered when evaluating ground clearance. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a higher ground clearance is advisable to avoid underbody scrapes or damage, considering the vehicle's off-road performance.
7
1
Share

Where is the fuel pump relay located in the JAC Refine?

JAC Refine fuel pump relay is located above the upper right corner of the front storage compartment on the passenger side. The JAC Refine is a 4-door, 7-seater vehicle with exterior dimensions of 5035mm in length, 1820mm in width, and 1970mm in height. It has a wheelbase of 3080mm, a minimum ground clearance of 190mm, and a fuel tank capacity of 95 liters. The JAC Refine is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147 hp, a maximum power output of 108 kW at 6000 rpm, and a maximum torque of 196 Nm between 3000 rpm and 4500 rpm.
14
1
Share

How to reset the maintenance light on JAC Refine S2?

Method to reset the maintenance light on JAC Refine S2: 1. First, turn on the ignition switch of the Refine S2. After ignition, you can see the maintenance light on the center console illuminate, then turn off the ignition switch; 2. Press and hold the reset or setting button; 3. Turn on the ignition switch again, and after about 5 seconds, the maintenance indicator light will go off, then release the reset button. The JAC Refine S2 is a compact SUV from JAC Motors, equipped with a 1.5L 113 horsepower L4 engine and a 5-speed manual transmission. The engine delivers a maximum power of 83kW and a maximum torque of 146Nm. The Refine S2 features a naturally aspirated intake system and can reach a top speed of 170km/h.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.