Where to Add Windshield Washer Fluid for Volvo S90?

Which Lane to Enter When Turning Right?

When making a right turn, vehicles should generally enter the rightmost motor vehicle lane, then accelerate and proceed according to the designated lane. Adapt flexibly based on road conditions: Typically, left turns should enter the leftmost lane, while right turns should enter the rightmost motor vehicle lane (the rightmost motor vehicle lane, not the bicycle lane). For U-turns, the vehicle should align with and enter the corresponding lane. However, adjustments may be necessary depending on road conditions. For example, if there is an obstacle in the leftmost lane during a left turn, the vehicle must use another lane; the same applies for right turns. Penalties for wrong-way driving during right turns: According to Article 90 of the Road Traffic Safety Law, penalties for wrong-way driving include: motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage rules will be given a warning or a corresponding fine. If other provisions of this law apply, penalties will be imposed accordingly.

4

1

Share

Why does a motorcycle jerk when releasing the clutch after upshifting?

It is caused by gear mismatch or excessive speed difference between the engine flywheel and clutch plate. Motorcycle jerking sensation: The jerking sensation mainly refers to poor gear shifting quality of the transmission. Since automatic transmissions encounter various situations during operation, it may occur when accelerating, decelerating, or releasing the throttle. Additionally, the transmission needs to interact with the engine for torque transfer, so the jerking sensation is not solely caused by the transmission itself. Solutions for motorcycle jerking sensation: Rev-matching downshifts: After pressing the clutch to downshift, step on the throttle pedal with your right foot before engaging the clutch again. This can prevent severe jerking after clutch engagement. If severe jerking occurs after shifting, it is due to excessive speed difference between the engine flywheel and clutch plate. To avoid jerking, reduce the speed difference between the clutch plate and engine flywheel.

20

0

Share

Does the Q7 have a 5-seater version?

The Q7 does not have a 5-seater version; all Q7 models are 7-seater versions. The Q7 is a mid-to-large luxury SUV under the Audi brand, with dimensions of 5067mm in length, 1970mm in width, and 1731mm in height, and a wheelbase of 2996mm. The Audi Q7 is equipped with two types of engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine of the Q7 has a maximum power of 245 horsepower and a maximum torque of 370 Nm, with the maximum power output at 5000 to 6000 rpm and the maximum torque output at 1600 to 4300 rpm. The 3.0-liter turbocharged engine has a maximum power of 340 horsepower and a maximum torque of 1500 Nm, with the maximum power output at 5200 to 6400 rpm and the maximum torque output at 1370 to 4500 rpm.

6

0

Share

What Level of Typhoon Can a Sedan Withstand?

A sedan can withstand typhoons of level 12-14. Typhoon: A typhoon, also known as a tropical cyclone, is a low-pressure vortex occurring over tropical or subtropical oceans, representing a powerful and deep "tropical weather system." In China, tropical cyclones in the South China Sea and the northwestern Pacific are classified into six levels based on the maximum average wind force (wind speed) near the bottom center. Those with wind forces reaching level 12 or higher near the center are collectively referred to as typhoons. Wind Resistance Performance Testing: This involves applying uniform wind loads to test specimens under laboratory-simulated wind conditions, evaluating the specimen's deformation and overall connection stability during the test. It generally includes two methods: static wind load testing and dynamic wind load testing. Multiple cyclic loading on the system can better simulate actual wind conditions. Wind resistance performance testing should be based on dynamic wind load testing, followed by static wind load testing only after no damage occurs during dynamic testing. This approach better verifies the system's normal wind resistance performance and improves reliability.

17

5

Share

Is driving done with the left foot on the clutch and the right foot on the brake and accelerator?

Driving is done with the left foot on the clutch and the right foot on the brake and accelerator. Introduction to the three pedals under the driver's feet: The far left is the clutch, the middle is the brake, and the right is the accelerator. In a manual transmission car, the driver's left foot is responsible for pressing the clutch, while the right foot is responsible for pressing the brake and accelerator. When starting the vehicle, first start the engine. Press the clutch all the way down with the left foot, shift into first gear, release the handbrake, and slowly release the clutch with the left foot to the half-clutch position. If the tachometer shows slight fluctuations or the vehicle tends to move, gently press the accelerator with the right foot while continuing to steadily release the clutch with the left foot. Once the vehicle starts moving, quickly lift the clutch. Gear shifting: After the vehicle starts, when the engine speed exceeds 2000 RPM, shift to the next gear. When shifting, press the clutch, switch gears, and then release the clutch.

3

1

Share

What about rally car engines?

There are three mainstream types of rally car engines: V-series, inline, and horizontally opposed, each with distinct advantages. Advantages and disadvantages of mainstream rally car engines: V-type engine: Compact in height and length dimensions, providing more space for the passenger compartment. The downside is the necessity of using two cylinder heads, resulting in a more complex structure and higher costs. Inline engine: Simple cylinder block and crankshaft structure, lower manufacturing costs, high stability, good low-speed torque characteristics, low fuel consumption, and compact size. The disadvantage is relatively lower power output. Horizontally opposed engine: Low center of gravity, making it easier to achieve overall balance. Low vibration with excellent piston motion balance. Engine concept: It is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The term 'engine' can refer to both the power-generating device and the entire machine including the power unit.

15

0

Share

Where to Add Windshield Washer Fluid for Volvo S90?

Which Lane to Enter When Turning Right?

Why does a motorcycle jerk when releasing the clutch after upshifting?

Does the Q7 have a 5-seater version?

What Level of Typhoon Can a Sedan Withstand?

Is driving done with the left foot on the clutch and the right foot on the brake and accelerator?

What about rally car engines?

Why does a manual transmission car have sluggish throttle response?

What lights should be turned on when a motor vehicle breaks down on the road at night?

What Should Be Installed on a Scooter Seat in Summer?

Can Geckos Get into Cars?