Where to Add Windshield Washer Fluid for the 10th Generation Civic?

1 Answers
VanSadie
07/24/25 3:26am
The windshield washer fluid reservoir for the 10th Generation Civic is located in the engine compartment. After opening the engine hood, you can find it slightly behind the hood support arm, marked by a blue cap. Windshield washer fluid, also known as wiper fluid, is a super-concentrated cleaning agent for car glass, featuring properties such as non-stickiness, anti-static, anti-corrosion, dustproof, cold resistance, acid rain resistance, antifreeze, and UV protection. The 10th Generation Civic adopts a family-style design, aligning with its sporty coupe positioning. The overall design leans towards a sporty aesthetic, with the front grille's bold chrome trim receiving a smoked treatment, and the through-type decorative panel enhancing its dynamic appearance.
Was this review help?
15
4
Share
More Forum Discussions

What is the actual fuel tank capacity of the 2018 Magotan B8?

The actual fuel tank capacity of the 2018 Magotan B8 is approximately 70 liters. Here are some precautions regarding car refueling: Do not overfill the tank: Overfilling the fuel tank can easily block the vent hole. Once the vent hole is blocked, the pressure inside the tank will drop below normal, leading to poor fuel supply or even a complete fuel cut-off. Overfilling also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing a safety hazard. Try to avoid waiting for the low fuel warning before refueling: While driving, always monitor the fuel gauge. When the gauge shows only a quarter of the fuel remaining, it's time to refuel. If the tank remains empty for too long, the temperature difference between the inside and outside can cause moisture to form inside the tank, which can corrode the tank, degrade fuel quality, and increase the engine's burden.
2
1
Share

How to Adjust Passat Seats?

The Passat seats come with both electric and manual adjustment options. For electric adjustment, there is a small module on the left side of the seat shaped like the seat itself. Pushing it up, down, forward, or backward allows you to find a comfortable position. For manual adjustment, the front and back adjustment is controlled by a pull handle located under the seat on the right side. Lift the handle and push the seat forward or backward. The height adjustment for the seat cushion is done via a lever on the left side of the seat that can be pulled up or pushed down to adjust the height. Here’s more about car seat adjustments: 1. The backrest can be adjusted using a knob on the left side of the seat. Turn it clockwise or counterclockwise to move the backrest forward or backward. 2. The lumbar support adjustment is located on the left side of the backrest. There’s a pull handle—push it forward or backward to feel the lumbar support change. 3. For a standard driving position, place your hands at the 12 o'clock position on the steering wheel with your arms comfortably extended. Your legs should be slightly bent, allowing your right foot to comfortably reach the brake and accelerator pedals. 4. If the steering wheel position feels uncomfortable, it can also be adjusted. Simply press down on the handle located under the steering wheel near the steering column, and then adjust the steering wheel up, down, forward, or backward as needed.
15
2
Share

How to Disable the Anti-Theft System on Great Wall Fengjun 5?

There are two methods to disable the anti-theft system on the Great Wall Fengjun 5. The first method involves manually modifying the data to cancel the anti-theft function. This requires using a programmer to read the engine control unit (ECU) data and manually modifying specific data to deactivate the anti-theft feature. The second method utilizes anti-theft cancellation software. The engine ECU data is loaded into the software, which automatically modifies it into anti-theft cancellation data. The generated cancellation data is then written back into the engine ECU. Below is more information about this vehicle: 1. In terms of exterior design, the Great Wall Fengjun 5 adopts a family-style grille. The hexagonal front grille is connected to the headlights on both sides, visually widening the front end and giving it a bold appearance. 2. In terms of configuration, the new vehicle is equipped with features such as power windows for all four doors, faux leather seats, a rear parking radar, and 15-inch aluminum alloy wheels.
5
2
Share

What is the fuel tank capacity of the Trumpchi GS8?

The 2022 Trumpchi GS8 model has a total of 12 variants, with fuel tank capacities of 65 liters and 58 liters. It features a single 2.0T engine displacement, with two transmission options: automatic and continuously variable transmission (CVT). The engine delivers a maximum power of 185.0 kW and a maximum horsepower of 252 PS. Among them, the 2022 Trumpchi GS8 Hybrid Series 2.0TM 4WD Premium (7-seater) has a fuel tank capacity of 58 liters. The 2022 Trumpchi GS8 Pilot Series 2.0TGDI 4WD Ultimate (7-seater) has a fuel tank capacity of 65 liters. The 2022 Trumpchi GS8 Hybrid Series 2.0TM 4WD Premium (6-seater) also has a fuel tank capacity of 58 liters. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by the automaker is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual refueling volume may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F.' When the needle is close to 'E,' it indicates low fuel, while nearing 'F' means the fuel level is sufficient.
6
1
Share

Can the rear seats of the Audi Q5L be folded down for sleeping?

The rear seats of the Audi Q5L can be folded flat, with a slight incline, making it possible to sleep in. Below is more related information: Notes on the rear seats of the Audi Q5L: First, there is a 1/3 or 2/3 split-folding option, typically found in rear seats with three seats, allowing you to fold down two seats on one side or one seat on the other side. Then there is the 1/2 split-folding option, usually found in rear seats with two seats, allowing you to fold down one of the two seats. Third, there is the 100% fold-down option, which allows the entire row of seats to be folded down to increase passenger comfort, such as combining with the second-row seats to form a temporary bed or to expand rear storage space. Method for folding the rear seats of the Audi Q5L: To adjust the angle of the rear seats in the Audi Q5L, lift the pressure plate switch on the side of the seat, then use hand force to move the seat backrest forward or backward to the desired position, and release the switch to lock it in place. To adjust the seat's forward or backward position, pull the fixed bow under the seat upward, move the seat to the desired position, release the fixed bow, and continue moving the seat forward or backward until the mechanism engages.
15
3
Share

How to Solve Foggy Windows?

Press the defogging button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and activate the external circulation to defog. Both cold and warm air can be used to defog car windows, but warm air works slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving defogging. The method of using warm air is the same as using cold air, but it's important to note that warm air should not be used on rainy days as it can initially worsen the fog. Always use external circulation when defogging car windows. The reason for foggy car windows: There is a temperature difference between the inside and outside of the car. If the temperatures inside and outside are different, the side with the lower temperature will have a lower saturated vapor pressure on its surface compared to the surrounding environment, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on promptly, the exhaled air has high humidity, quickly causing the windshield to fog up. At this point, turn on the air conditioning to blow cold air onto the windshield, using the dehumidifying function to remove the fog quickly. If the humidity is too high and the air conditioning is not effective, slightly open the windows to rapidly reduce the humidity inside the car. Combining this with the air conditioning can speed up the process. Air Conditioning Heating: Use the method of reducing the temperature difference to remove fog. In winter, blow warm air onto the glass to quickly raise the temperature of the windshield and reduce the temperature difference between the inside and outside surfaces, preventing excessive fogging. However, it should be noted that the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Avoid setting the temperature to the coldest position, as this can cause frost to form on the outside of the windshield over time. Applying Anti-Fog Spray: Spray a small amount of defogging agent onto the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog. This is especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying, let it dry and then wipe off any excess with a chamois or soft dry cloth. This can keep the windows fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, open the side windows to create airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating the fog. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows is obvious—it cannot be used during rain, snow, on highways, or when the fog is heavy. Rear Window Heating: Most cars have a rear window heating function, though the button location may vary. Turn on the rear window heating switch, and the fog will disappear in about a minute.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.