Where to Add Windshield Washer Fluid for Mercedes-Benz C-Class?

1 Answers
VonAdriel
07/29/25 12:17pm
Mercedes-Benz C-Class windshield washer fluid can be refilled under the hood. Simply open the hood to access it. Below are detailed introductions about windshield washer fluid: 1. Windshield washer fluid, commonly known as glass water, is a consumable used in cars. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It is also referred to as glass cleaner (i.e., window cleaner). 2. During autumn and winter, windshield washer fluid should have excellent cleaning and antifreeze properties. Winter windshield washer fluid should be selected based on its antifreeze performance, ensuring its freezing point is at least 10°C lower than the local minimum temperature. Otherwise, the fluid may freeze, leading to issues like a malfunctioning washer pump. Choose according to the local temperature. Reputable brands categorize their products into different levels based on temperature ranges, making it easier to select according to seasonal changes.
Was this review help?
15
1
Share
More Forum Discussions

Is it a problem if the tires are not straightened when parking?

Parking with the tires not straightened has the following disadvantages: 1. It can damage the steering system, as the steering linkage remains under stress without returning to its original position, which can accelerate aging over time; 2. It harms the suspension system, causing it to tilt towards the direction the vehicle is turned, leading to accelerated wear of the soft-supporting rubber pads and bushings under constant stress; 3. It accelerates tire wear, as the sidewalls of the tires bear excessive stress and deformation, leading to faster wear of the tire sidewalls. Tire maintenance tips: 1. Check tires at least once a month. Inspect the tire pressure when the tires are cool, including the spare tire. 2. If you notice a rapid decrease in pressure, investigate the cause immediately rather than simply inflating the tires at a shop. Inflation pressure must follow the manufacturer's specified values. 3. Replace tires when they wear down to the wear indicator marks. Driving with tires beyond the wear indicator marks is dangerous in wet conditions, as the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. If you notice excessive vibration while driving, it may indicate poor wheel alignment or imbalance. These issues not only shorten tire life but also affect vehicle handling and safety. 5. When replacing tires, ensure that tires on the same axle have the same specifications, structure, brand, and tread pattern. If replacing a single tire, ensure that the tread groove depth is consistent with the other tire on the same axle to prevent vehicle misalignment.
6
1
Share

What does car mapping mean?

It refers to projecting the phone screen onto the car's display, allowing the operation of navigation, videos, music, games, and other functions on the phone through the display. The addition of car phone mapping functionality is explained below: 1. Mirrorlink: Through a USB interface, the central console display can show the phone screen content in real-time and supports synchronized touch control. Whether sending or receiving text messages, making phone calls, using phone playback software to play videos and music from the phone, directly displaying phone navigation content, or even running various apps installed on the phone, all operations can be completed on the central console display. 2. MyLink: Through WLAN and Bluetooth connections, a mapping is established between the phone screen and the car's display, enabling bidirectional control between the phone and the car's display (official app download required). 3. CarLife: CarLife supports most car systems on the market and is also achieved by connecting the phone via USB. Unlike Apple's plug-and-play, Baidu CarLife requires a separate client download. After connecting via USB, the client needs to be launched, and the phone must not be in a locked screen state.
4
5
Share

What is the generation history of the Audi A6?

Audi A6 generation history: From the first-generation C1 to the fourth-generation C4, it was named Audi 100. Starting from the late fourth generation, it was renamed Audi A6. From the sixth generation onward, it was named Audi A6L in China. The latest model is currently the eighth generation. First generation: In 1966, an Audi engineer sketched a very impressive prototype car design during his leisure time, which was highly approved by Volkswagen's management, leading to the decision to put the Audi 100 into production. By the time production ceased in 1976, the C1 had sold over 820,000 units. Second generation: Due to the popularity of the C1, the second-generation Audi 100, known as the C2, was launched immediately after the C1's discontinuation. The C2 also featured an engine with a maximum power output of 100 horsepower, and its boxy design was a trend at the time. Third generation: Compared to the boxy design of the previous generation, the C3 featured a more streamlined body with a drag coefficient of just 0.3. In terms of powertrain, the Audi 200 was equipped with a 2.2L high-power engine delivering up to 163 horsepower, while the Audi 100 retained the previous generation's engine. Fourth generation: The fourth-generation Audi followed closely in the footsteps of its predecessor and renamed the Audi 100/200 series to Audi A6. Fifth generation: This generation of the Audi A6 adopted a completely new design language. Even when compared to the current C8, despite a 20-year gap, one can still sense the intricate connections between the two models. Sixth generation: To counter the pressure from the 5 Series and E-Class, this generation of the A6 introduced the large grille design for the first time. Additionally, daytime running lights were added during the mid-cycle refresh. Seventh generation: Starting from this generation, it became evident that Audi intended to reduce the A6's business-oriented attributes. At the same time, the headlights further solidified Audi's reputation as the "Light Factory." Not only were all light sources upgraded to LED, but adaptive high and low beams were also introduced, automatically adjusting the illumination range based on road conditions. Eighth generation: In 2018, the all-new Audi A6L was officially launched. Based on the new MLB Evo platform, the new model reached the pinnacle of the A6's history in terms of both electrification features and driving experience.
13
0
Share

Is the Lamando produced by SAIC or FAW?

Lamando is a compact car launched by SAIC, a Sino-German joint venture co-operated by SAIC Group and Volkswagen Group. It produces and sells products under the Volkswagen and Skoda brands, covering segments such as A0, A, B, C, SUV, and MPV. The Lamando is a compact car introduced by SAIC Volkswagen, with dimensions of 4615mm in length, 1826mm in width, and 1425mm in height, and a wheelbase of 2656mm. It is equipped with a 1.4T turbocharged engine with a maximum power output of 96kW, paired with a 7-speed dual-clutch transmission.
9
1
Share

Can Keyless Start Be Installed by Oneself?

Keyless start can be installed by oneself. Here are the relevant details: 1. However, most vehicle models require modifications to the original wiring during installation, and the installation costs vary for different models. Some models even require wiring modifications before the keyless entry system can be installed, which can be a significant expense. 2. Currently, there are plug-and-play options for one-button start modifications on the market, but most still require rewiring. If the modification is done at an unprofessional shop, there may be potential safety hazards. Therefore, vehicle owners who need this installation should choose products with quality assurance and have the installation done at a reputable modification shop.
14
1
Share

How to Eliminate Static Electricity When Opening Car Doors?

Methods to eliminate static electricity when opening car doors: You can discharge the vehicle's static electricity by carrying a metal object with you, or eliminate personal static electricity by wearing gloves or applying moisturizing products to your hands. Generally, winters are drier, and the clothes you wear are more prone to generating static electricity. Additionally, friction between the car and dry dust in the air can produce static electricity. To eliminate static electricity from the car, you can install an anti-static strip on the metal parts at the rear of the vehicle to discharge the static electricity to the ground. Car doors provide access for drivers and passengers, isolate external disturbances, and to some extent, reduce side impacts to protect occupants.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.