Where to Add Windshield Washer Fluid for Fengxing SX6?
3 Answers
Fengxing SX6 windshield washer fluid is added to the windshield washer fluid reservoir located in the engine compartment. Here is some additional knowledge about adding windshield washer fluid: 1. Quantity: When adding windshield washer fluid, be careful not to overfill to avoid spillage and damage to other car components. 2. How to Determine the Quantity: There is a scale on the windshield washer fluid filler port. By observing the scale, you can determine the amount of washer fluid. Simply open the hood, find the cap with the windshield washer fluid symbol, open the cap, and add the prepared windshield washer fluid. Finally, close the cap tightly. 3. Types of Windshield Washer Fluid: Windshield washer fluid is mainly divided into three types: summer-use windshield washer fluid, winter antifreeze windshield washer fluid, and special-effect antifreeze windshield washer fluid. The summer-use windshield washer fluid is primarily used to remove insect residues from the windshield.
I've been driving my Fengxing SX6 for several years, and adding windshield washer fluid is a simple task. Open the engine hood by pulling the handle located on the left side of the steering wheel, then lift the cover. The washer fluid reservoir is positioned on the left front side of the engine compartment, with a clear windshield wiper symbol on its cap. Gently unscrew the cap and slowly pour in the dedicated windshield washer fluid, being careful not to overfill and cause spills. I use bottled washer fluid purchased from the supermarket—standard type in summer with appropriate amounts, and always antifreeze type in winter to prevent nozzle blockage from freezing. After adding, tighten the cap securely, then return to the car to test the spray effect, ensuring an even water flow. Check the fluid level every two months; don't wait until it's dry to refill, as poor visibility increases driving risks. Wear gloves during the process to avoid staining, and choose branded products to prevent scale buildup and clogging. This task isn't complicated, and maintaining good habits helps prolong the car's lifespan.
As a new car owner, I was a little nervous when adding windshield washer fluid to my Fengxing SX6 for the first time. The hood release button is located on the left side of the driver's seat. After pulling it, you'll see a white or blue tank at the front with a cap marked with a water droplet and wiper symbol. Unscrew the cap and pour in the purchased washer fluid slowly to avoid spills—I poured too vigorously and spilled some into the engine bay. Remember not to use tap water, as it can cause buildup and clog the nozzles. After filling, close the cap and test-spray the front windshield; if the fluid flows normally, you're good. Check the fluid level quarterly and top it up when low. Use standard fluid in summer and switch to antifreeze type in winter. The process is simple and easy to learn. It's safer to ask a friend to supervise initially, but mastering it yourself saves time and hassle.
