Where to Add Transmission Oil for BAIC Senova?

Will driving with a detached intake pipe damage the engine?

Driving with a detached intake pipe will damage the engine. Reasons why it can damage the engine: The intake pipe is the manifold that connects the air filter to the carburetor. The intake manifold is the pipe that connects the bottom of the carburetor at the upper end to the intake valve of the cylinder block at the lower end. Without the intake pipe, issues such as vehicle shaking, insufficient engine power, and increased fuel consumption may occur. Intake pipe: Includes the main intake pipe and the branch intake pipes. In addition to power performance, the engine must also have good fuel economy and emission performance. In gasoline engines, the intake pipe must also consider issues such as fuel atomization, evaporation, distribution, and the utilization of pressure waves. In diesel engines, it is also required that the airflow forms an intake vortex in the cylinder through the intake port to improve mixture formation and combustion.

10

3

Share

What is the wheelbase of a sedan?

Wheelbase of a sedan refers to the distance from the center of the front axle to the center of the rear axle. It is the distance between two vertical lines passing through the centers of adjacent wheels on the same side of the vehicle and perpendicular to the longitudinal symmetry plane of the vehicle. Classification of wheelbase: It is divided into fixed wheelbase, bogie wheelbase, and total wheelbase. Total wheelbase is the distance from the foremost axle to the rearmost axle, which is the main parameter affecting the "turntable length" of a train. Impact of wheelbase on a car: The length of the wheelbase greatly affects the comfort and handling stability of a sedan. Generally, the higher the sedan class, the longer the wheelbase. A larger wheelbase means a longer cabin length, more spacious seating space for passengers, better anti-pitch and anti-yaw performance. While a long wheelbase improves straight-line cruising stability, it reduces steering flexibility, increases turning radius, and worsens the car's maneuverability.

10

3

Share

Under which brand is Lynk & Co?

Lynk & Co is a sub-brand under Geely Automobile, jointly established by Geely and Volvo. The models under Lynk & Co include 01, 02, and 03, all of which are built on the CMA platform co-developed by Geely and Volvo. The dimensions of the Lynk & Co 03 are 4639mm in length, 1840mm in width, and 1460mm in height, with a wheelbase of 2730mm. The Lynk & Co 03 is a sedan that is currently quite popular and has gained favor among many young consumers. This car is equipped with two engines: a 1.5-liter three-cylinder turbocharged engine and a 2.0-liter turbocharged engine.

20

5

Share

Should You Drive Fast or Slow Through Water on the Road?

Driving fast through water on the road is generally better. However, when facing waterlogged sections, you should adjust your speed flexibly based on the water depth. Reasons for driving fast through water: Before driving through water, you can first check the water depth and choose a shallow, slow-moving area to drive through quickly in one go. Driving too fast may cause stalling: First, after entering a waterlogged section, the car will churn up water and mud in the puddle, creating wave-like movements. If the speed is too high, water can easily splash onto pedestrians or vehicles in adjacent lanes, and in severe cases, it may obstruct others' vision and compromise driving safety. Second, if the water is too deep, splashed water may enter the engine's air intake, causing the car to stall. Driving too slowly may cause exhaust pipe backflow: Although the exhaust pipe has some thrust and can block water from entering when submerged, if the speed is too slow and the water is too deep, the exhaust pipe's thrust may not be sufficient to prevent water from flowing back into it. Therefore, while driving at a low speed through waterlogged sections, the speed should not be excessively slow.

9

3

Share

Where is Lynk & Co produced and which manufacturer is it?

Lynk & Co is produced in China, at the Luqiao factory in Taizhou, also known as the Taizhou Asia-Europe Base, where the Lynk & Co 01 is produced on the same line as the Volvo V40. The Lynk & Co 02 and Lynk & Co 03 are produced at the Zhangjiakou factory, which was formerly known as the Kaiyue Automobile Components Manufacturing (Zhangjiakou) Co., Ltd., and is part of Geely's Zhangjiakou vehicle project. The Lynk & Co 02 is a high-energy coupe SUV under the Lynk & Co brand, with dimensions of 4448mm in length, 1890mm in width, and 1528mm in height, and a wheelbase of 2702mm. The car's center console features a 10.25-inch touchscreen, integrating functions such as rearview camera and GPS navigation.

20

1

Share

Are GAC Toyota and GAC Honda the Same Company?

GAC Toyota and GAC Honda are not the same company. Both GAC Toyota and Guangzhou Honda are joint ventures established by Guangzhou Automobile Group with Japanese automakers Toyota and Honda, respectively. This means their Chinese investor is Guangzhou Automobile Industry Group Co., Ltd. GAC Honda is located in Huangpu, while GAC Toyota is based in Nansha. No overlap in brands: The two automakers have no overlap in their brands. GAC and Dongfeng each have their own vehicle models. In terms of sales, in the first half of 2018, Dongfeng Honda's sales were significantly lower than GAC Honda's, with this gap being quite noticeable. Difference in quality: The two brands differ in quality. Many people criticize Dongfeng Honda for its relatively rough craftsmanship, while GAC Toyota's designs are more conservative, with stable technology and better overall quality. In summary, Dongfeng Honda and GAC Honda are like two brothers.

6

1

Share

Where to Add Transmission Oil for BAIC Senova?

Will driving with a detached intake pipe damage the engine?

What is the wheelbase of a sedan?

Under which brand is Lynk & Co?

Should You Drive Fast or Slow Through Water on the Road?

Where is Lynk & Co produced and which manufacturer is it?

Are GAC Toyota and GAC Honda the Same Company?

Can the insurance of a transferred vehicle be claimed normally if the insurance is not transferred?

Where are the high beams located?

Can a car operate normally after removing the catalytic converter?

Why Does the Brake Make Abnormal Noises When Turning?