Where to Add Engine Oil in a Car?
2 Answers
Engine oil is added through the oil filler cap located on top of the engine. The steps are as follows: Open the engine hood, unscrew the oil cap on the left side of the engine counterclockwise, and then pour in the prepared engine oil. Precautions for adding engine oil: 1. When selecting engine oil, use the grade specified in the car's user manual; 2. Try to choose multi-grade oil, which saves fuel, has a long service life, is efficient, and provides better protection for the engine; 3. The amount of oil added should be slightly lower than the standard mark. Excessive oil will increase the rotational resistance of the crankshaft, reduce the engine's output power, cause the vehicle to burn oil and emit blue smoke, and even increase fuel consumption.
I usually maintain my car myself, and adding engine oil is a common and simple task. First, turn off the engine and let it cool for a few minutes—safety is crucial. Then, open the hood and look for a small plastic cap near the engine at the front of the car, usually marked with an oil can icon or 'Oil Cap' label—this is the fill port. Unscrew the cap, prepare a new bottle of engine oil and a funnel to avoid spilling oil everywhere. Pour it in slowly; the bottle has markings to indicate how much you need. Don’t overfill—usually, fill up to the max mark on the dipstick, or the engine might start smoking. After pouring, close the cap, start the car, and let it idle for a minute or two. Then, check the dipstick again to confirm the oil level is within the normal range. It’s recommended to check the oil level every few months, as older cars tend to burn oil and may need more frequent top-ups. Choose the right oil viscosity as recommended in the manual to keep the engine running smoothly, saving both money and hassle.
