Where should the vehicle inspection sticker be placed?

3 Answers
VanCora
09/03/25 3:21am
Vehicle inspection stickers should be placed on the upper right corner of the front windshield. There are several methods to attach the motor vehicle inspection sticker: 1. Direct application: Peel off the sticker and attach it directly to the upper right corner of the front windshield; 2. Static cling method: Peel off the inspection sticker and attach it to a static cling, then place the static cling on the upper right corner of the front windshield; 3. Lamination method: Take the annual inspection sticker to a copy shop, have it laminated, apply a bit of transparent tape on each corner, and then attach it to the windshield. Not only should the motor vehicle inspection sticker be placed on the upper right corner of the front windshield, but the compulsory traffic insurance sticker must also be placed on the upper right corner of the front windshield.
Was this review help?
8
2
Share
MaxFitz
09/15/25 5:02am
I have been driving for many years, and the vehicle inspection compliance sticker should be affixed to the upper right corner of the front windshield as required. This location is well-chosen as it does not obstruct the driver's line of sight, ensuring clear visibility while driving, especially during nighttime or high-speed driving, making it much safer. When applying the sticker, first clean the dust and grease off the glass with a clean cloth, then peel off the protective backing and press it firmly into place about 5 centimeters from the top edge of the windshield. I personally prefer using a bank card to smooth out any bubbles to prevent peeling or detachment. If the sticker is not placed here—for example, if it's affixed to the lower left corner or the middle—it may be flagged during a traffic police inspection, resulting in a fine or even affecting the vehicle's annual inspection approval. Currently, some cities are promoting electronic labels, but the paper version remains the mainstream. Properly affixing it ensures peace of mind.
Was this review help?
10
5
Share
Expand All
DelEmily
09/15/25 5:04am
From a legal perspective, the vehicle inspection sticker must be affixed to the upper right corner of the windshield, as explicitly stipulated by traffic regulations. This requirement aims to prevent obstruction of the driver's view and ensure road safety. I personally experienced being pulled over by traffic police and lectured for half a day plus fined when I once forgot to display it properly. Since then, I've been particularly careful about accurate placement. Before applying the sticker, ensure the glass is free of water stains or dirt, then align it precisely in the upper right corner and press firmly to prevent high-speed wind pressure from peeling it off. This position also facilitates quick verification by law enforcement officers during roadside checks, avoiding unnecessary delays. Complying with regulations by placing it correctly can reduce avoidable troubles while protecting personal safety and preventing potential accidents.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Where to add oil for the Tiida steering gear?

The Tiida steering gear is electronically assisted and does not require oil. The steering gear is the most important component in the car's steering system, and its functions are to amplify the force transmitted from the steering wheel to the steering transmission mechanism and to change the direction of force transmission. The Tiida is a compact car under Dongfeng Nissan. Taking the 2021 Tiida as an example, its body dimensions are: length 4393 mm, width 1766 mm, height 1539 mm, wheelbase 2700 mm, and fuel tank capacity 50 liters. The 2021 Tiida is equipped with a 1.6L naturally aspirated engine, with a maximum power of 90 kW and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
17
3
Share

Where are the drainage outlets on the Volkswagen Sagitar doors?

The drainage outlets on the Volkswagen Sagitar doors are located at the bottom of the doors. You can see them by removing the sealing strip at the bottom of the door. The door drainage holes effectively drain rainwater out of the car, maintaining a relatively dry environment inside. The Volkswagen Sagitar is a compact car under FAW-Volkswagen. Taking the 2021 Sagitar as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, with a wheelbase of 2731 mm and a fuel tank capacity of 50 liters. The 2021 Sagitar is equipped with a 1.2T turbocharged engine, with a maximum power of 85 kW and a maximum torque of 175 Nm, paired with a 5-speed manual transmission. It uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
20
3
Share

What is the correct way to use ABS?

The correct way to use ABS is: 1. To brake, keep your foot firmly on the brake pedal without releasing it to ensure sufficient and continuous braking force; 2. Maintain an adequate braking distance; 3. Practice using ABS to be prepared for and capable of handling the brake pedal vibrations when ABS is active; 4. Read the car driver's manual in advance to further understand various operations. ABS is an anti-lock braking system, and its functions are: 1. To fully utilize the braking efficiency, reducing braking time and distance; 2. To effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. To allow steering during emergency braking, providing good steering control; 4. To avoid severe friction between the tires and the ground, reducing tire wear.
15
1
Share

What Lights Should Be Used for Nighttime Driving on Highways?

Highway nighttime driving light usage depends on specific situations: 1. During normal driving: Turn on night lights and width indicators; 2. When meeting oncoming traffic: Combine high beams and low beams; 3. When overtaking: Switch from high beams to low beams in advance and activate turn signals. Important precautions for safe highway driving include: 1. Quickly accelerate to an appropriate speed when entering the highway from an on-ramp; 2. Always pay attention to roadside and roadway signs and markings, and drive appropriately on the right side; 3. Maintain proper longitudinal distance between vehicles; 4. When overtaking, activate the left turn signal and sound the horn, passing the preceding vehicle from the overtaking lane; 5. If an emergency requires stopping, quickly indicate rightward direction.
15
2
Share

What is the purpose of auto start-stop in cars?

The functions of auto start-stop in cars are: 1. When the vehicle stops due to traffic congestion, waiting at a red light, or temporary parking, the driver presses the brake pedal and shifts to neutral. The vehicle remains stationary, and the auto start-stop system initiates a self-check. 2. If it detects that the engine is idling and not in gear, the wheel speed sensor reads zero, and it continues to check whether the vehicle has sufficient battery power for the next start. The working principle of auto start-stop is: When braking to stop and shifting to neutral, the system automatically detects that the engine is idling and not in gear, the speed sensor shows zero, and the battery sensor indicates sufficient energy. The engine automatically stops running. Upon pressing the clutch, releasing the brake, or turning the steering wheel, the system quickly restarts the engine.
8
4
Share

What is the validity period of a temporary car license plate?

Car temporary license plates are valid for: fifteen days, thirty days, or ninety days, including both working days and holidays. A temporary license plate is a provisional vehicle travel permit issued by the vehicle management department of the public security authorities when a car has not yet been officially registered due to some formalities. Temporary license plates are divided into: 1. Temporary license plates for administrative jurisdictions; 2. Temporary license plates for cross-administrative jurisdictions; 3. Temporary license plates for testing; 4. Temporary license plates for special types of motor vehicles. Temporary license plates should be affixed using ordinary tape or double-sided tape, and should be placed in the lower left or right corner of the front windshield inside the car, in a position that does not obstruct the driver's view, to ensure driving safety.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.