Where should the novice driver sticker be placed on the car?

1 Answers
MacDallas
07/28/25 6:04pm
Novice driver stickers should be placed on both sides of the rear windshield or on the trunk of the car. These stickers are used to indicate that a new driver is on the road, serving as a warning to other vehicles to prevent safety accidents such as rear-end collisions. They are commonly used by new drivers who have just started test driving and can also be referred to as novice practice stickers or novice yield stickers. According to the implementation regulations of the Road Traffic Safety Law of the People's Republic of China, the first 12 months after a motor vehicle driver initially obtains a driver's license is considered the probationary period. During this period, if driving a motor vehicle, a uniform-style probationary sign must be affixed or hung at the rear of the vehicle.
Was this review help?
10
5
Share
More Forum Discussions

How to Check for Frame Deformation?

Remove the frame and lay it flat. Stretch a steel wire through the centers of the front and rear crossbeams of the frame, then cross the wires between adjacent beams. The difference in distance from the two intersection points to the centerline should not exceed 3mm. Use a plumb line, straightedge, and square to check its straightness and verticality. Below are related introductions: 1. Definition of the frame: The frame, also known as the chassis, is the base of the vehicle. It generally consists of two longitudinal beams and several crossbeams, supported by the suspension system, front axle, and rear axle on the wheels. It must have sufficient strength and rigidity to withstand the vehicle's load and impacts transmitted from the wheels. 2. Judging the quality of the frame: To assess the design and structure of the frame, it is essential to first understand the various forces the frame must endure while the vehicle is in motion. If the frame lacks toughness in any aspect, even the best suspension system cannot achieve good handling performance.
2
4
Share

How Many Minutes to Warm Up the Car?

The correct way to warm up your car is to start driving within 30 seconds to one minute after ignition. However, avoid driving at high RPMs during this time. Keep the speed low and limit the engine RPM to no more than 3000–3500, ideally around 2000 RPM. Driving aggressively at this stage can cause irreversible damage to the engine and transmission due to excessive wear. Once the engine reaches its normal operating temperature, you can resume your usual driving style. The reasons for warming up the car are as follows: 1. Lack of Lubrication: After prolonged parking, the engine oil flows back into the oil pan at the bottom of the engine. When you start the engine after a long period of inactivity (e.g., overnight), the upper part of the engine lacks lubrication as it is temporarily without oil. 2. Inefficient Fuel Vaporization: Before the engine reaches its operating temperature (approximately between 90–110 degrees Celsius), the fuel system cannot effectively vaporize gasoline due to the low temperature. 3. Transmission Gear Lubrication: This is the aspect most people are unaware of and often overlook. Similar to engine oil, transmission gear oil flows to the lower part of the transmission when the car is cold. Only when the car is in motion does the gear movement circulate the oil to lubricate the upper parts.
11
0
Share

What is the fuel consumption of the Beidouxing?

The Suzuki Beidouxing has a fuel consumption of approximately 7.0 liters per 100 kilometers, making it a relatively fuel-efficient vehicle. Some drivers have even reported achieving less than 6 liters per 100 kilometers. Below is some relevant information about the Beidouxing: 1. Engine: The Suzuki Beidouxing is equipped with a 1.4-liter naturally aspirated engine across all models. This engine delivers a maximum power of 71 kW and a maximum torque of 120 Nm, with the maximum power achieved at 6,000 rpm and the maximum torque at 3,600 rpm. The engine features VVT technology and multi-point fuel injection, and it utilizes an aluminum alloy cylinder head and block. Paired with this engine is a 5-speed manual transmission. Manual transmissions are known for their reliability and durability, and they also have lower maintenance costs. 2. Body Dimensions: The Suzuki Beidouxing uses a MacPherson independent suspension at the front and a non-independent single longitudinal swing arm suspension at the rear. Despite its compact body size, the Beidouxing offers a surprisingly spacious interior. The vehicle measures 3,400 mm in length, 1,575 mm in width, and 1,670 mm in height, with a wheelbase of 2,335 mm.
18
2
Share

What is the bulb model for the BYD Qin headlights?

The bulb model for the BYD Qin headlights is H7. The illumination effect of the headlights directly affects nighttime driving operations and traffic safety. Therefore, traffic management authorities worldwide generally stipulate the lighting standards for automotive headlights in legal forms to ensure safe nighttime driving. More details are as follows: 1. Illumination distance requirements: To ensure driving safety, the driver must be able to identify any obstacles on the road within 100 meters in front of the vehicle. The illumination distance of the car's high beam must exceed 100 meters. This data is determined based on the vehicle's speed. With the increase in modern vehicle speeds, the required illumination distance may also increase. The illumination distance of the car's low beam is approximately 50 meters. The positioning requirements mainly involve illuminating the entire road surface within the illumination distance without deviating from the road. 2. Anti-glare devices: Automotive headlights should be equipped with anti-glare devices to prevent the driver of an oncoming vehicle from being dazzled during nighttime encounters, which could lead to traffic accidents. During nighttime encounters between two vehicles, the beam is tilted downward to illuminate the road within 50 meters in front of the vehicle, thereby avoiding dazzling the driver of the oncoming vehicle.
1
0
Share

How to Solve the Home Charging Problem for New Energy Vehicles?

New energy vehicles can be directly charged at home with 220V. The following is an introduction to charging new energy vehicles: 1. Charging with a three-hole socket: Use a standard plug socket with a rated current not exceeding 16A to charge directly at home, which takes about 8-10 hours to fully charge. 2. Charging with an AC charging pile: Charge directly on the AC grid with higher current using a charging pile, which takes about 4 hours. The power of slow charging piles is usually 3.5kW and 7kW, and this value depends on the rated input power of the onboard charger. For single-phase AC charging, the rated input current of the onboard charger is currently divided into two mainstream types: 16A and 32A, resulting in 16*220≍3.5kW and 32*220≍7kW. 3. Charging with a DC charging pile: When connecting an electric vehicle to the AC grid or DC grid, a DC power supply device with control guidance function is used. Generally, only pure electric vehicles on the market are equipped with DC charging function, which is the so-called "fast charging". Fast charging takes a short time, as the high-power onboard DC charger directly outputs DC to charge the vehicle battery. The power of fast charging piles on the market ranges from 30kW to over 100kW, and the charging time also varies from a few minutes to 2 hours.
7
3
Share

What to Do If Your Driver's License Has Expired for One Month Without Renewal?

If your driver's license has expired for one month without renewal, you can still renew it normally without any impact. Time regulations: If it has been expired for less than one year, you can renew it normally; if it has been expired for more than one year but less than three years, the license will be canceled, but you can renew it by passing the subject one exam; if it has been expired for more than three years, the license will be invalid and cannot be renewed. Renewal methods are as follows: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Drivers can renew their license via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is usually delivered by mail. You can also go to the "Police-Medical-Post" service point at a postal business hall to handle the renewal. The entire process, from registration to medical examination to the production of the new license, takes only half an hour. Currently, only a few cities have launched this service, such as Hangzhou.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.