Where should the front of the car be positioned during a hill start?

What Causes Engine Oil Emulsification?

Engine oil emulsification is caused by water mixing into the oil. The specific reasons and solutions are as follows: The causes of water entering the engine oil are: 1. Cracked water cavity in the heat exchanger leading to water leakage into the oil. 2. Poor sealing of the cylinder head or cracked water cavity, loose sealing of the cylinder liner water jacket, cylinder liner cavitation, allowing water from the combustion chamber to enter the oil. Emulsified oil will have reduced oil film strength, failing to meet the lubrication requirements of the engine, and thus needs to be replaced. The solutions for engine oil emulsification are: 1. Clean the engine and replace the oil. 2. Clean the air filter chamber, exhaust pipe, carburetor, and exhaust joint. 3. Fill the engine with kerosene, repeatedly start and shut off the engine, ensuring the burning time does not exceed 30 seconds, then replace with new kerosene.

17

5

Share

Where is the cabin air filter located in the Fiat Viaggio?

The cabin air filter of the Fiat Viaggio is located behind a cover panel on the lower left side of the glove compartment, near the passenger's left foot area. There is a removable cover panel - simply pull it outward to reveal the black cover of the cabin air filter. The black cover is secured with two screws, which can be removed using a screwdriver. The cabin air filter is a component installed in the vehicle's air conditioning system that absorbs dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the AC cooling system. The Fiat Viaggio is a model produced by Fiat Automobiles, with body dimensions measuring 4679mm in length, 1850mm in width, and 1471mm in height, with a wheelbase of 2708mm. In terms of exterior design, the Viaggio inherits Fiat's signature front grille design while adding sporty exterior packages including a glossy black front bumper, matte chrome exterior mirrors, sporty side skirts, and dual exhaust pipes, further enhancing the vehicle's sporty character.

11

3

Share

What to Do When the Engine Yellow Light Flashes and Shakes?

The reason for the engine yellow light flashing and shaking is that the engine has malfunctioned. The following are the causes of the engine yellow light flashing and the solutions: 1. Causes of the engine yellow light flashing and shaking: 1. Poor combustion of the engine's air-fuel mixture. When the mixture in the cylinder is too rich, the vehicle may experience symptoms such as knocking and shaking. 2. Faulty spark plugs, high-voltage wires, or ignition coils. 3. Abnormal fuel supply pressure or a faulty intake pressure sensor. 2. Solutions for the engine yellow light flashing and shaking: 1. If the car cannot start, it needs to be towed to a nearby repair shop for inspection and repair. 2. If the car can drive normally and there are no additional abnormalities, you can try restarting the car. 3. If the car shows symptoms such as no acceleration or abnormal engine noise after the yellow light comes on, you need to stop immediately and inspect and repair the car.

11

4

Share

How often should the Leiling spark plugs be replaced?

The Leiling spark plugs should be replaced every 40,000 to 50,000 kilometers. The Leiling spark plugs are platinum spark plugs. If the wear is significant, they should be replaced as soon as possible. The function of the spark plug is to introduce the high-voltage electricity (over 10,000 volts) generated by the ignition coil into the engine cylinder, creating a spark between the spark plug electrode gaps to ignite the air-fuel mixture. The Leiling is a compact sedan built on Toyota's MC platform. In terms of body dimensions, it measures 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. In terms of exterior design, the Leiling adopts the styling of the North American version of the model. The front face features more lines compared to the previous version, with raised front fenders on both sides. The headlights have been redesigned into a hook-like style, and the rear has undergone minor styling changes, featuring a black horizontal chrome strip that runs across the taillights. The lower black trim wraps around the rear, transforming the previously purely family-oriented image.

9

3

Share

Has the CRV oil dilution issue been resolved?

CRV oil dilution has not been resolved. Below is a detailed introduction to the CRV oil dilution issue: 1. The 2019 CRV model has seen significant improvements, but the 1.5T engine remains the same as before, with no substantial changes. Some owners in northeastern and northwestern regions still report oil dilution and emulsification issues. The oil problem in the 2019 CRV has not been completely resolved. Honda has officially acknowledged that this engine has a fundamental design flaw. Simply replacing parts, using better oil, adjusting the scale limits, or optimizing the control program cannot fundamentally solve the problem. 2. The 2017 CR-V is equipped with a 1.5T direct-injection turbocharged engine. During the engine compression process, some gasoline adhering to the cylinder walls enters the oil pan under pressure. As the engine operates and the oil temperature rises, this gasoline evaporates and re-enters the combustion chamber for re-combustion and emission. However, if the oil temperature is low, the gasoline evaporates slowly, causing some gasoline to remain in the oil, leading to an increase in the oil level.

14

5

Share

Do You Need to Press the Brake When Shifting Gears in an Automatic Car While Driving?

Automatic cars do not require pressing the brake when shifting gears while driving. More information about automatic cars is as follows: 1. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Automatic transmissions consume 10% more fuel than manual transmissions. The more gears there are, the more fuel-efficient the car becomes. 2. Automatic transmissions use planetary gear mechanisms for shifting, automatically adjusting gears based on the degree of throttle pedal pressure and changes in vehicle speed. 3. The most common type is the hydraulic automatic transmission: primarily composed of a hydraulically controlled gear-shifting system, it mainly includes an automatic clutch and an automatic transmission. It can automatically shift gears according to the throttle opening and changes in vehicle speed. 4. The continuously variable transmission (CVT) consists of two sets of variable pulleys and a drive belt, belonging to a type of automatic transmission. However, it overcomes the shortcomings of conventional automatic transmissions, such as "sudden shifting," slow throttle response, and high fuel consumption. Compared to traditional automatic transmissions, it has a simpler structure and smaller size, allowing for free changes in the transmission ratio to achieve seamless shifting throughout, resulting in smoother vehicle speed changes.

16

3

Share

Where should the front of the car be positioned during a hill start?

What Causes Engine Oil Emulsification?

Where is the cabin air filter located in the Fiat Viaggio?

What to Do When the Engine Yellow Light Flashes and Shakes?

How often should the Leiling spark plugs be replaced?

Has the CRV oil dilution issue been resolved?

Do You Need to Press the Brake When Shifting Gears in an Automatic Car While Driving?

What Causes Steering Wheel Vibration at 100 km/h?

Can a Car Key Still Be Used After Being Washed?

How to activate the automatic locking function on the Haval F7?

What is the maximum age for learning to drive?