Where is Volvo Produced in China?

1 Answers
VanVera
07/29/25 7:10pm
Volvo has a total of four production bases in China, which are: Shanghai Headquarters Base, Chengdu Volvo Car Western Base, Chongqing Volvo Car Western Base, and Daqing Volvo Car Northern Base. Here are the detailed introductions: 1. Shanghai Headquarters Base: The Shanghai Headquarters Base serves as the administrative hub of Volvo Car Group China. The Volvo Car China Technical Center in Shanghai focuses on the design, research, and development of premium cars, electric vehicles, and new energy vehicles. 2. Chengdu Volvo Car Western Base: The Chengdu Volvo Car Western Base primarily covers the western China market and participates in and supports the Western China Development Strategy. 3. Chongqing Volvo Car Western Base: The Chongqing Volvo Car Western Base primarily covers the western China market and participates in and supports the Western China Development Strategy. 4. Daqing Volvo Car Northern Base: The Daqing Volvo Car Northern Base primarily covers the northern China market. Its geographical conditions and latitude are similar to those of Sweden, aiming to participate in and support the revitalization of the old industrial bases in Northeast China.
Was this review help?
14
4
Share
More Forum Discussions

What Causes Water Accumulation in the Jetta's Trunk Spare Tire Compartment?

Jetta's trunk spare tire compartment water accumulation reasons are as follows: Trunk seal strip cracking or aging: The car's sealing strips and sealing rings are crucial components for waterproofing and dustproofing. If they become aged or cracked, it can easily lead to water leakage inside the car or allow water ingress when the vehicle is wading due to poor sealing. Replaced taillights: If the vehicle's taillights have been replaced, it may create gaps. Additionally, substandard wiring during the installation of a reversing radar can cause rainwater to enter the trunk along the wiring. Trunk drainage outlet blockage: When the trunk's drainage outlet is blocked, any accidentally entered water cannot drain out, leading to significant water accumulation.
17
0
Share

What is the Normal Power Output for a Car?

There is no definitive answer to what constitutes a normal power output for a car, as it varies by model. For example, the Volkswagen Sagitar 1.4T model has a displacement of only 1.4L but delivers an output power of 110 kW, while the 1.6L manual version produces 80.9 kW. Therefore, each car model has a different power output, and the suitable power level also varies. Below is more information about car power output: 1. Car power output refers to the work done by the car per unit of time. Power is a measure of how quickly work is done. Higher power generally means greater torque and higher pulling force, which is why maximum power is often used to describe a car's performance. Maximum power is usually expressed in horsepower (PS) or kilowatts (kW), with 1 horsepower equaling 0.735 kilowatts. Power is a physical quantity that indicates how fast work is done, defined in physics as P = work W / time t, with the unit being watts (W). 2. Power units include kW, PS, HP, BHP, and WHP, as well as the previously used Italian unit CV. Among these, kilowatts (kW) are the international standard unit, where 1 kW = 1000 W. If 1000 joules of work are done in 1 second, the power is 1 kW. Power is commonly referred to as horsepower, measured in 'horsepower units,' much like torque is often called 'twisting force.'
11
2
Share

How many liters of transmission oil does the Kia K3 require?

The Kia K3 requires 2.5 liters of transmission oil. The Kia K3 is a compact vehicle equipped with a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. Its exterior dimensions are 4660mm in length, 1780mm in width, and 1450mm in height, with a wheelbase of 2700mm. The Kia K3 is fitted with a CVT transmission, delivering a maximum power of 85 kW and a maximum torque of 143.9 Nm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
6
2
Share

What is the fuel consumption of the c260?

The fuel consumption of the Mercedes-Benz c260 is 6.9L/100km. The following is a related introduction to vehicle fuel consumption: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle driving a certain speed on the road for 100 kilometers, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated at a specified speed to obtain the theoretical experimental fuel consumption data per 100 kilometers for the model. Relationship between fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume can accommodate more combustible mixture, so when all other conditions are the same, an engine with a larger cylinder volume has better/higher power/fuel consumption.
2
5
Share

How Many Years Can a Car's Putty and Repainting Last After Repair?

It depends on the quality of the putty and the technician's skill. If high-quality putty is used and the technician is highly skilled, it can last for more than 5 years. However, if the putty is too thick or the technician's skill is poor, cracking may occur within as little as half a year. Since putty contains moisture, environmental temperature also affects its stability. Therefore, it is advisable to seek professional repair shops for painting to avoid bigger issues later. Below are the reasons why putty is needed before painting: 1. To fill small dents on the body panels: preventing uneven surfaces or bubbles after painting. 2. To enhance the vehicle's appearance: making its shape look better.
4
4
Share

What is the fuel consumption of the H9?

The fuel consumption of the Haval H9 is 9.9L/100km. Below is relevant information about vehicle fuel consumption: Fuel consumption per 100 kilometers: This refers to the amount of fuel a vehicle consumes when driving a hundred kilometers at a certain speed on the road, serving as a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by manufacturers using a dynamometer installed on the vehicle's chassis under objective conditions, converted into speed parameters, and then calculated under specified speeds to derive the theoretical experimental fuel consumption data for the model. Relationship between fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume can accommodate more combustible mixture, so under all other conditions being equal, an engine with a larger cylinder volume will have better/higher power/fuel consumption.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.