Where is the Yan'an Detachment Subject 1 Examination Site?

What is the best way to deal with counterfeit engine oil?

If your car accidentally uses counterfeit engine oil, it is recommended to immediately consult a local auto repair technician to determine a maintenance plan. Generally, an engine internal cleaning agent should be used to clean the engine interior, replace the oil filter, and then promptly switch to genuine engine oil to resolve the issue. Symptoms of using counterfeit engine oil include: severe damage to the car's engine, rapid evaporation of water in the engine radiator, unstable engine idle, loud noise, increasing noise with speed, high fuel consumption, abnormal engine sounds, insufficient power, weak acceleration, parking vibration, cylinder scoring, increased carbon deposits, early activation of the maintenance light on the dashboard, etc. These issues can easily lead to cylinder scoring and bearing failure, shortening the engine's lifespan, and in severe cases, causing sudden hazards that endanger the owner's safety. When these symptoms appear, the engine oil should be thoroughly checked.

9

2

Share

What to Do If You Have Myopia During Driver's License Physical Examination?

Individuals with myopia can obtain a driver's license as long as they can achieve normal vision by wearing glasses during driving. Specifically, the naked or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart to pass the driving school's physical examination. Below are details about the driver's license physical examination: 1. Examination Requirements: For a C1 driver's license, the height must be above 150 cm, the visual acuity of both eyes must be 4.9 or above, there should be no red-green color blindness, the hearing must be able to distinguish the direction of sound with each ear at 50 cm from a tuning fork, each hand must have three fully functional fingers with normal motor function, the right lower limb must have normal motor function, and the trunk and neck must have normal motor function. 2. Required Materials: For the driver's license physical examination, you need to prepare your ID card and a recent one-inch color photo with a white background. Some driving schools or vehicle management offices may require on-site photography.

2

5

Share

How to Deal with Motorcycle Handlebar Vibration?

Motorcycles are inherently lightweight, often equipped with fewer cylinders, and many are single-cylinder models. Additionally, low-quality overhead valve engines dominate the market. If you purchase an inexpensive motorcycle, vibration is almost inevitable, and there is little room for improvement. For branded motorcycles, changing the oil, adjusting valve clearance, and proper maintenance can help mitigate the issue. Below are the related causes: 1. Overhead Valve Engine: If the motorcycle has an overhead valve engine, this issue is quite common. Tightening all the engine's mounting screws, especially the two thicker ones at the rear, may help. If they are already tight, there is little that can be done, as the vibration is largely due to inherent manufacturing flaws in the engine, which also leads to significant resonance with the frame. 2. High-Speed Rotating Components in the Engine: Components such as the magneto and clutch can also contribute to vibration. Due to machining inaccuracies, uneven mass distribution in these parts can cause imbalance during high-speed rotation, resulting in noticeable vibration.

14

2

Share

How to Check the Production Year of a Seat Belt?

The method to check the production year of a seat belt is: Pull out the entire seat belt, and at the very bottom, there is an attached label that displays the production date of the seat belt. Note that some seat belts directly indicate the date, such as A0527: 'A' represents 2010, so combined, it means the seat belt was produced on May 27, 2010; B0610: 'B' represents 2011, meaning the seat belt was produced on June 10, 2011. The correct way to use a seat belt is: 1. Close the car door and adjust the seat to a comfortable position; 2. Pull the buckle of the seat belt downward along your body, ensuring the belt is not twisted; 3. Insert the buckle into the latch until you hear a click, then gently tug the buckle to check if it's securely locked; 4. Pull the lap belt downward and the shoulder belt upward to ensure the lap belt is firmly fastened.

20

1

Share

What are the symptoms of transmission slippage?

Transmission slippage symptoms: 1. When starting, pressing the accelerator causes the engine speed to increase quickly, but the vehicle speed increases slowly; 2. While driving, pressing the accelerator increases the engine speed but the vehicle speed does not improve rapidly; 3. The vehicle lacks power when climbing a slope on level ground, and the engine speed is very high. For transmissions exhibiting slippage, first check the hydraulic oil level, inspect the quality of the hydraulic oil, conduct a road test to determine if the automatic transmission is slipping, and check which gear is slipping and the extent of slippage. Causes of transmission slippage: 1. Hydraulic oil level is too low; 2. Hydraulic oil level is too high; 3. Excessive wear or burning of clutch or brake friction plates and brake bands; 4. Excessive wear of the oil pump or main oil circuit leakage, resulting in low oil pressure; 5. One-way overrunning clutch slippage; 6. Damage to the clutch or brake piston seal ring.

4

3

Share

Why does the motorcycle lack power and fail to accelerate when throttling?

The reasons why a motorcycle lacks power and fails to accelerate when throttling are as follows: 1. Insufficient fuel: A lean air-fuel mixture causes insufficient piston thrust after ignition, prolongs combustion time, and leads to engine overheating. The symptom of a lean mixture is poor acceleration during operation; acceleration improves when manually adjusting the choke or pumping fuel, but power loss returns when not enriching the mixture, indicating the motorcycle is running lean. 2. Excessive fuel: A rich air-fuel mixture causes poor acceleration at low speeds. A rich mixture lacks sufficient oxygen during combustion, leading to incomplete combustion, reduced power, decreased fuel efficiency, and excessive carbon buildup that clogs the exhaust system, worsening the power loss. 3. Clogged air filter, excessively high carburetor float level: Fuel overflow in the carburetor float chamber; loose main jet in the carburetor; malfunctioning enrichment system in the carburetor; clogged main air jet in the carburetor. 4. Poor fuel quality or incorrect gasoline octane rating: Can cause knocking; expired gasoline may decompose and lose calorific value; water in the fuel leads to intermittent engine operation and backfiring; presence of other impurities in gasoline.

17

3

Share

Where is the Yan'an Detachment Subject 1 Examination Site?

What is the best way to deal with counterfeit engine oil?

What to Do If You Have Myopia During Driver's License Physical Examination?

How to Deal with Motorcycle Handlebar Vibration?

How to Check the Production Year of a Seat Belt?

What are the symptoms of transmission slippage?

Why does the motorcycle lack power and fail to accelerate when throttling?

What Gear Should an Automatic Car Use on the Highway?

What does the AC switch in a car air conditioner mean?

What is a Car Audio DSP?

How to Check the Year of BMW 5 Series Windows?