Where is the Yamaha oil drain port located?

1 Answers
LaAlan
07/30/25 5:38am
The Yamaha motorcycle engine has two oil drain ports. The one at the bottom left side of the engine is more convenient for regular use. At the bottom right side of the engine, there is a larger plug that contains an oil filter screen. During routine maintenance, this can be removed to inspect and clean the oil filter screen. Generally, as long as qualified oil is replaced regularly, it won't get clogged, so frequent removal for cleaning isn't necessary. The position of the oil drain screw: The oil drain screw is located at the bottom of the oil pan. Since it's on the exterior, it's easily visible. This design helps in completely draining the oil and cleaning the oil pan. Yamaha motorcycle performance: This model is equipped with a single-cylinder, water-cooled SOHC-4 valve engine, delivering a maximum power of 11.3 kW (8000 rpm) and a maximum torque of 13.7 N·m (6500 rpm). It reduces friction and power loss, improves combustion efficiency, and enhances cooling performance, resulting in stronger acceleration, higher top speed, and lower fuel consumption.
Was this review help?
8
1
Share
More Forum Discussions

What brand is Leopaard?

Leopaard is an independent automobile brand, the abbreviated name of Hunan Leopaard Automobile Co., Ltd. It is a comprehensive automotive manufacturer engaged in the R&D, production, sales and service of complete vehicles and components, affiliated to Changfeng Group with headquarters in Changsha, Hunan. Its SUV lineup mainly includes Leopaard MATTU, Leopaard CS10, Leopaard CS9, Leopaard CS9EV, Leopaard Q6 and Leopaard Black King Kong. Taking Leopaard CS10 as an example, this model serves as the flagship urban SUV in Leopaard's portfolio, featuring crystal-cut headlight design with projector-equipped halogen low beams and integrated daytime running lights within the headlight cluster.
4
0
Share

What to Do When the Air Conditioning Heat Dissipation of a Truck is Poor?

If the air conditioning heat dissipation of a large truck is poor, first check whether the fan is faulty. If it is, replace it. Inspect the water tank for blockages; if there is dirt clogging, clean it. Check the condenser for faults or dirt blockages, and replace or clean it as necessary. Here is some additional information: 1. Composition of the air conditioning refrigeration system: The automotive air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, among other components. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system is operating, the refrigerant circulates within this sealed system in different states. 2. Condenser: The condenser, also known as the air conditioning radiator, is installed in front of the engine and can usually be seen by opening the front cover. Inspect the surface of the air conditioning condenser for any debris that may affect its heat dissipation. During summer use, flush the condenser with a water hose to facilitate heat dissipation, as a clean surface allows heat to be released more effectively. Regularly cleaning the condenser surface can significantly improve the cooling efficiency of the air conditioning system.
10
3
Share

Will the traffic police regulate the installation of navigation lights at the rear of a car?

Traffic police will regulate it. Installing navigation lights on a vehicle is considered an unauthorized modification of vehicle lighting, which is not permitted. Additionally, during vehicle inspections, it will not pass. According to the Road Traffic Safety Law, unauthorized modification of vehicle lighting is subject to penalties. Below is additional information: 1. The function of navigation lights: The primary purpose of navigation lights is to make the vehicle more noticeable during daytime driving. Their effect is not to help the driver see the road better but to inform others that a vehicle is approaching. Therefore, these lights are not for illumination but serve as signal lights. The goal of daytime running lights is to enhance traffic safety. 2. The role of daytime running lights: In recent years, many countries have established relevant standards for daytime running lights to ensure that the installed lights genuinely contribute to safety. When turned on while driving, they increase the visibility of moving vehicles, helping drivers take timely action in various situations. Daytime running lights are designed to signal the presence of a vehicle ahead during the day and are typically installed on both sides at the front. They help focus the attention of drivers, especially those who are fatigued.
18
4
Share

What are the common faults of the clutch?

Common clutch faults include: 1. Clutch slippage: When the car starts in low gear, the vehicle cannot start or has difficulty starting after releasing the clutch pedal; 2. Incomplete clutch disengagement: When the engine is idling, stepping on the clutch pedal results in gear collision sounds and difficulty engaging gears; 3. Starting shudder: When the car starts in low gear, gradually releasing the clutch pedal and slowly pressing the accelerator pedal according to operational procedures causes the clutch to engage unsteadily and produce vibrations, with severe cases even causing the entire vehicle to shake; 4. Clutch noise: Abnormal sounds occur when the clutch is disengaged or engaged.
13
2
Share

What are the 16 items in Subject 2 driving test?

Here is a detailed introduction to the 16 road test items in Subject 2: 1. Vehicle preparation: After hearing the voice prompt "Begin vehicle preparation for the test," walk around the vehicle once before getting in and fastening the seatbelt. 2. Night driving: Upon hearing "Now simulating night driving, approaching an intersection (switch to low beam), entering an unlit section (switch to high beam), road with good lighting (switch to low beam), approaching an uncontrolled intersection (sound horn), temporary parking by the roadside (activate hazard lights)." 3. Starting off: After hearing "Begin starting off (activate left turn signal for over 3 seconds, sound horn and start)," drive 10 meters after starting. 4. Straight-line driving: Upon hearing "Begin straight-line driving test," align the vehicle within the lane without crossing markings, and drive straight for 100 meters. 5. Lane change: After hearing "Begin lane change test," activate left turn signal (over 3 seconds) and change lanes, driving 100 meters. 6. Overtaking: Upon hearing "Begin overtaking test," activate left turn signal (over 3 seconds), move to overtaking lane, drive over 20 meters before returning, with total overtaking distance of 200 meters. 7. Meeting vehicles: After hearing "Begin meeting vehicles test," keep left side at least 30cm from double yellow lines, speed below 30km/h, for 70 meters. 8. Gear shifting: Upon hearing "Begin gear shifting test," sequentially shift from 2nd to 4th gear, then back to 2nd gear, fully release clutch after each shift while maintaining straight driving. Speed limits: 1st gear ≤20km/h, 2nd ≤27km/h, 3rd ≤37km/h, 4th ≤47km/h, 5th ≥30km/h. Total distance 250 meters. 9. Straight through intersection: After hearing "Begin straight through intersection test," maintain speed ≤30km/h and straight trajectory without crossing markings. 10. Left turn at intersection: Upon hearing "Begin left turn test," enter left-turn lane, activate left signal (over 3 seconds), turn at ≤30km/h without crossing markings. 11. Right turn at intersection: After hearing "Begin right turn test," enter right-turn lane, activate right signal (over 3 seconds), turn at ≤30km/h without crossing markings. 12. Pedestrian crossing: Upon hearing "Begin pedestrian crossing test," maintain ≤30km/h straight trajectory without crossing markings. 13. Bus stop: After hearing "Begin bus stop test," maintain ≤30km/h straight trajectory for 50 meters without crossing markings. 14. School zone: Upon hearing "Begin school zone test," maintain ≤30km/h straight trajectory for 50 meters without crossing markings. 15. U-turn: After hearing "Begin U-turn test," activate left signal (over 3 seconds) in overtaking lane and execute turn. 16. Pull over: Upon hearing "Begin pull over test," activate right signal (over 3 seconds), park within 30cm of curb (10-point penalty if >30cm), over 100 meters, then shift to neutral, engage handbrake, release footbrake, unfasten seatbelt, and open/close door. Continuous 1st gear driving ≤100 meters; marking straddling ≤60 meters.
20
0
Share

How to Replace the Battery in a Lexus Remote?

The method to replace the battery in a Lexus remote is: 1. There is a mechanical key inside the remote key, take out the mechanical key; 2. After taking out the mechanical key, there is a small groove in the middle of the plastic shell, insert the mechanical key into the groove and gently pry it open; 3. After opening, you can see the battery, simply replace it directly. Lexus is a famous luxury car brand under the Japanese Toyota Group, its logo uses the uppercase letter L from the car name Lexus, with an ellipse surrounding the L. The main models under Lexus include LM, UX300e, ES, RX, NX, UX, CT, etc.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.