Where is the wiper relay located on the Vizi?

Differences Between Dongfeng Tianjin and Duolika D9?

Dongfeng Tianjin and Duolika D9 are both products of Dongfeng, but they belong to different series. Here are the detailed differences: 1. In terms of appearance, both Tianjin and Duolika D9 feature an upright A-pillar design combined with multi-faceted mirrors to minimize blind spots. The cabs are primarily designed with straight lines, but the D9 has noticeably more varied lines, presenting an overall U-shape. Additionally, the D9 includes wind deflectors and a protruding front bumper. 2. Differences in headlights, steering wheels, and sunroofs: The D9 uses a four-spoke steering wheel, while the Tianjin uses a two-spoke one; the Tianjin has manual windows, whereas the Duolika D9 features electric windows; the Tianjin's headlights are more comprehensive, while the D9 combines high/low beams and turn signals into a simpler design. 3. The Tianjin is equipped with a Dongfeng EQH160-52 engine, and the D9 uses a Yuchai YCAEG170-50 engine: The Dongfeng EQH160-52 engine has a maximum output of 160 horsepower, a displacement of 4.7521L, and reaches its peak torque of 600 Nm at 1200-1600 rpm. The Yuchai YCAEG170-50 engine has a displacement of 4.731L, a maximum output of 170 horsepower, and delivers its peak torque of 600 Nm at 1300-1500 rpm.

5

3

Share

How to Match the Intake Manifold Flap of the Magotan?

Magotan's intake manifold flap, also known as the intake flap, can be matched as follows: 1. The Magotan is equipped with the EA888 engine, and the matching of its intake flap is mainly based on the engine speed signal transmitted by the crankshaft position sensor. 2. When the engine speed reaches the set value, the engine computer activates the solenoid valve circuit, opening the vacuum line to match the intake flap. The working principle of the intake manifold flap is as follows: 1. When the intake valve opens, air flows into the cylinder. Due to inertia, even after the piston reaches the bottom dead center, air continues to flow into the cylinder. If the intake valve is closed when the cylinder pressure reaches its maximum, the volumetric efficiency will be maximized—this effect is called the inertia effect. 2. To achieve optimal volumetric efficiency, both the pulsation effect and the inertia effect must be considered. This means that when the cylinder pressure reaches its maximum and the intake valve closes, the compression wave in the front intake manifold also reaches its highest position (peak). 3. A longer intake manifold provides higher volumetric efficiency at low engine speeds, resulting in higher maximum torque values. However, as the speed increases, both volumetric efficiency and torque values drop sharply, which is unfavorable for high-speed operation. A shorter intake manifold can improve volumetric efficiency at high engine speeds but reduces the maximum torque value and delays its occurrence.

19

0

Share

What kind of unit uses white license plates with black characters?

White license plates with black characters represent national authority institutions such as political and legal departments (public security departments, judicial departments, procuratorates, courts, and state security), police vehicles, armed police forces, and the People's Liberation Army. The white color symbolizes the integrity and honesty of these departments, emphasizing that institutions serving the people must maintain cleanliness. There are five main colors for vehicle license plates: 1. Blue plates with white characters: The most common type, representing ordinary small vehicles. 2. Yellow plates with black characters: Representing large vehicles such as buses, trucks, motorcycles, and driving school training vehicles. 3. Black plates with white characters: Representing foreign-related vehicles, such as consular vehicles. 4. Green plates with white characters: Representing agricultural vehicles.

13

5

Share

What are the causes of vehicle stalling?

The causes of vehicle stalling need to be analyzed on a case-by-case basis. 1. If the vehicle stalls abruptly with no noise or abnormal sounds, and the engine stops working suddenly, this is mostly due to an electronic control system failure. Possible causes include blown fuses, damaged high-voltage coils, faulty ignition controllers, engine electronic control system malfunctions, or broken circuits. 2. If the vehicle stalls gradually, with noticeable shaking, weak acceleration, backfiring, or symptoms similar to insufficient fuel supply before stalling, and some vehicles can even restart normally after stalling, this is usually caused by a fuel system issue. Possible causes include low fuel levels, clogged fuel filters, blocked fuel lines, damaged fuel pumps, blown fuel pump fuses, or faulty fuel pump relays. 3. If the vehicle exhibits high-temperature coolant warnings, oil pressure warning lights, or abnormal noises before stalling, this is generally due to mechanical engine failure. Possible causes include broken timing belts, low oil levels, damaged oil pumps, insufficient coolant, faulty water pumps, or other mechanical failures.

4

1

Share

Can you change lanes on three dashed lines?

Three dashed lines allow lane changing. Here is extended information: 1. Three dashed lines refer to the dividing lines between same-direction lanes. You may overtake by crossing dashed lines without affecting normal traffic flow, whereas solid lines prohibit lane changes. 2. At white dashed lines ahead, lane changes are permitted only when safety is ensured. Violations incur fines and 3-point deductions. 3. White solid lines at some highway exits also prohibit crossing. To exit via service roads, you must change lanes in advance at white dashed lines.

13

4

Share

How to navigate an S-curve using mirrors?

Navigating an S-curve using only the left rearview mirror is as follows: 1. Before entering the S-curve: Slow down. The principle is to follow the outer line. For example, when preparing to enter a left turn, the vehicle should stay to the right. 2. When the left corner of the vehicle touches the right boundary line: Turn the steering wheel one full turn to the left. While driving, adjust the steering wheel left or right by 90 degrees to keep the left corner of the vehicle pressing against the right boundary line, ensuring the vehicle does not cross the line. 3. After completing the first right boundary line: The left corner of the vehicle will have left the right boundary line. Maintain the steering direction until the right corner of the vehicle touches the right boundary line, then straighten the steering wheel and continue driving slowly forward. 4. When the left 1/3 of the engine hood's right side aligns with the left boundary line of the right turn: First, turn the steering wheel one full turn to the right, continue driving slowly, and similarly adjust the steering left or right to keep the right corner of the vehicle pressing against the left boundary line of the right turn. 5. After the vehicle exits the curve: Align the front of the vehicle with the S-curve exit, straighten the vehicle, and then straighten the steering wheel to exit the test area.

7

2

Share

Where is the wiper relay located on the Vizi?

Differences Between Dongfeng Tianjin and Duolika D9?

How to Match the Intake Manifold Flap of the Magotan?

What kind of unit uses white license plates with black characters?

What are the causes of vehicle stalling?

Can you change lanes on three dashed lines?

How to navigate an S-curve using mirrors?

How to manually reset the car malfunction indicator light?

What are the driving experience and other requirements for Didi drivers?

How to Remove Oil Film from the Windshield?

What License is Required for a 1000cc Motorcycle?