Where is the wiper relay located in a Nissan Qashqai?

2 Answers
Grover
07/24/25 12:24am
Nissan Qashqai's wiper relay is located in the fuse box in the engine compartment. Wiper: Technically known as a windshield wiper, it is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main function is to clear rain, snow, and dust that obstruct the view on the windshield. Intermittent Flexible Wiper: It can be adjusted by the driver according to the intensity of the rain and visibility conditions. Unlike ordinary wipers installed on other vehicles, it can automatically adjust the wiping speed based on changes in vehicle speed. This is because, with the same amount of rainfall, the faster the vehicle speed, the more rainwater is encountered. Additionally, when the vehicle is stationary, the wiper operates at a reduced speed, thereby minimizing noise.
Was this review help?
11
4
Share
CoraAnn
08/10/25 8:10pm
I've been driving a Nissan Qashqai for several years, and the wiper relay is usually located in the fuse box. The fuse box in the engine compartment is the most common place, near the battery. After opening the cover, look for labels or icons—the component with a wiper symbol is the relay. The relay is responsible for controlling the current switch of the wiper motor. If the wipers aren't moving or are slow to respond, this is often where the problem lies. First, disconnect the negative battery terminal to ensure safety, then check if the relay is burnt out or loose. Simple tools like a small screwdriver can be used to remove and inspect or replace it. If you're unsure about the location, refer to the owner's manual, which contains detailed diagrams. Related issues include the wiper system's fuse and motor—if the relay fails, the fuse may also blow, so both should be checked together. Regularly cleaning around the relay to prevent dust and water buildup can avoid corrosion and extend its lifespan.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Will driving in S gear have any impact?

It will increase fuel consumption but has no impact on the vehicle. Here are the relevant details: 1. S Gear: This is the sport mode, which essentially increases the engine's power output by raising the shift RPM and increasing fuel injection. The sport mode in cars is generally controlled by the transmission computer, meaning the shift programming is different. 2. Benefits: The car's transmission will shift freely, but the shift timing is delayed, forcing the engine to maintain higher RPMs for a longer period. Although using S gear can reduce some safety hazards during overtaking and better utilize the engine's braking effect when going downhill, thereby improving safety.
10
4
Share

What Causes Cracks in Tires of a New Car Less Than a Year Old?

Cracks appearing in the tires of a new car less than a year old may be related to the quality of the tires. Below is an introduction to tire-related information: 1. Functions of tires: Mainly include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load-bearing capacity, handling performance, average wear, and mileage. 2. Tire cross-sectional structure: Generally, it can be divided into four parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the rim to provide sealing. 3. Internal composition of tires: The inside of the tire is composed of multiple layers of different materials, including tread pattern, cover layer, steel belt layer, stress absorption rubber strip, carcass ply layer, and airtight layer.
7
2
Share

How long does it take to check traffic violations on highways in another city?

It usually takes 3-5 days to check traffic violations on highways in another city. Here are the relevant details: 1. Violation: The captured footage needs to be confirmed before it can be uploaded to the traffic police internal network. The time required for confirmation and upload varies depending on the location, behavior, and penalty of the violation, typically taking 3-5 days. Not all violations can be confirmed and uploaded immediately. 2. Out-of-city violations: Car owners need to bring their ID card, driver's license, vehicle license, and violation notice to the traffic management department for processing. The deadline for processing violations is 15 days. After 15 days, a late fee of 3% per day will be added, with the maximum not exceeding the original fine amount.
13
5
Share

What is the RPM for first gear clutch engagement?

First gear clutch engagement is at 1000 RPM. Below are the relevant details: 1. Engine RPM: When shifting gears and accelerating, you should not focus on the engine RPM. Instead, release the clutch slowly while gently applying throttle to start the vehicle, then fully release the clutch and apply appropriate throttle. Considering RPM can be misleading, especially on slopes where higher RPM may be required. Therefore, operation should not be based solely on engine RPM. 2. Clutch semi-engagement: This refers to the unstable connection state of the clutch, where the driver presses the clutch pedal to gradually reduce clutch pressure, resulting in a combination of rotation and slipping between the driving and driven plates. The main purpose of semi-engagement is to prevent stalling during operation. Most civilian engines maintain an idle speed between 600~1000 RPM, which corresponds to a fixed transmission speed, typically ranging between 0~10 km/H.
8
2
Share

What lights to use when passing through a crosswalk at night?

At night, you should alternate between high and low beams at least twice when passing through a crosswalk. Here are the relevant details: 1. Article 59: When a motor vehicle passes through a sharp curve, slope, arch bridge, crosswalk, or an intersection without traffic signal control at night, it should alternate between high and low beams as a signal. When a motor vehicle approaches sections with limited visibility that affect safety, such as sharp curves or the top of a slope, or when overtaking or encountering an emergency, it should slow down and sound the horn as a signal. 2. Low visibility: In low-visibility conditions such as at night, the driver's visible range is much greater when using high beams compared to low beams, but high beams are not suitable for all scenarios.
20
1
Share

What brand is a circle with a horizontal bar in the middle?

A circle with a horizontal bar in the middle is the logo of Trumpchi Automobile. Here are the relevant details: 1. Trumpchi Logo: The 'G'-shaped logo is the initial of the English abbreviation 'GAC' for Guangzhou Automobile Group, embodying the brand philosophy of 'Building good cars for loved ones and filling the world with love.' Additionally, GAC Trumpchi is the first model under the Guangzhou Automobile Group. In 2014, Trumpchi was awarded the CCTV China Brand of the Year title, becoming the only brand in the automotive industry to receive this honor. 2. Trumpchi Brand: Trumpchi is primarily dedicated to the production and sales of Trumpchi-branded vehicles with internationally advanced standards. Centered around the concept of high-quality brand development, the greatest advantage of Trumpchi models lies in their unparalleled domestic after-sales service, coupled with reliable quality.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.