Where is the wiper relay in Lavida?

2 Answers
LaMiguel
09/03/25 7:25am
It may be in the control box under the hood. Car relays are generally similar, so you can try following the control line of the wiper to locate it. Introduction to wipers: Wipers are blade structures installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Their main function is to clear rain, snow, and dust from the windshield that obstruct the driver's view, thereby improving visibility and enhancing driving safety. Due to legal requirements, almost all cars worldwide are equipped with wipers. Regular cleaning of wipers: Use a dedicated cleaning solution to wipe and clean the wipers during each car wash. During maintenance, also pay attention to the condition of the wipers. Avoid pulling or tugging them too forcefully, as this can easily damage the wipers.
Was this review help?
16
5
Share
DeOwen
09/16/25 2:01am
Last time I drove an old Lavida, I also had wiper issues. It took me a while to locate the relay position. Specifically, it's in that black box on the left side of the engine compartment, the palm-sized fuse box next to the battery. You'll need to pry open the cover first - it's packed with fuses and relays inside. The wiper relay is usually a small square labeled J31 or marked with a wiper symbol in the upper left corner. To confirm, you can refer to the diagram on page 85 of the manual. If you still can't find it, try unplugging and replugging them one by one (remember to disconnect the power first). Older cars' wiring tends to degrade, so it's worth checking if nearby wire harnesses have been chewed by rodents. This kind of minor issue won't cost more than a few dozen bucks at a repair shop.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How Long Does a BMW System Upgrade Take?

BMW system upgrades typically take around 2 hours. A system upgrade involves programming the vehicle, and the modules that require programming cannot be manually selected. Here is a detailed introduction about BMW cars: 1. Overview: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW). The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series. 2. Logo: The logo features a double-circle design with the letters "BMW" inscribed above the double circles. The entire emblem resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing BMW's long history and the company's consistent purpose and goals.
15
4
Share

What are the differences between Polo GTI and Golf GTI?

1. Different appearance: The Polo GTI is relatively plain, featuring only the GTI-specific alloy wheels and the GTI badges on the front grille and rear trunk. The Golf GTI comes with a specially designed aerodynamic kit from Volkswagen, giving it a commanding and stylish yet steady presence. 2. Different space: The Polo is an A0-class sedan with a relatively cramped interior, making it less suitable for larger individuals. The Golf is a standard A-class sedan that can meet the needs of most people.
5
3
Share

What is the reason for the broken spring of the Bora shock absorber?

Bora shock absorber spring breakage is caused by poor linkage coordination. The following are methods to check whether the shock absorber is damaged: 1. External surface: Generally, the external surface of the shock absorber is dry. If oil seeps out or hydraulic oil leaks from the piston rod, the shock absorber is damaged. 2. Rough roads: When driving on rough roads or speed bumps, if abnormal noises occur from the wheels, the shock absorber is damaged. Below are extended notes on Bora car first maintenance considerations: 1. Appointment: Make an appointment in advance. 2. Essentials: Bring necessary items such as the maintenance manual and vehicle license. 3. Records: Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration.
12
1
Share

What is the working principle of ABS?

ABS system, also known as the Anti-lock Braking System, operates on the following principle: During braking, ABS monitors speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for wheels that begin to lock, maintaining constant braking force. If the wheel continues to lock, it then opens the normally closed output solenoid valve. This keeps the braking state at its optimal point, ensuring the best braking performance and maximum driving safety. ABS, short for Anti-lock Braking System, functions by automatically controlling the braking force during vehicle deceleration to prevent wheel lock-up. It maintains the wheels in a rolling-sliding state (with a slip ratio of about 20%), thereby maximizing the adhesion between the tires and the road surface. The ABS system primarily consists of four components: wheel speed sensors, electronic control unit (ECU), hydraulic unit, and ABS warning light. The wheel speed sensors detect the motion state of each wheel, generating sinusoidal AC electronic pulse signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The central electronic control unit (ECU) receives input signals from the wheel speed sensors. Using these parameters, it calculates wheel speed, vehicle speed, and slip ratio. Based on the slip ratio, it determines wheel status and issues control commands to the hydraulic unit. The hydraulic unit adjusts brake line pressure according to control commands, with the regulation process including pressure maintenance, pressure increase, and pressure reduction. The ABS warning light alerts the driver to potential system malfunctions. If the ABS warning light illuminates, it is advised not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels could cause the vehicle to skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety risks.
6
1
Share

How Many Hours Are Required for Driver's License Check-in?

Driver's license check-in hours are as follows: 1. Subject 1: 12 credit hours. 2. Subject 2: 14 to 16 credit hours, including 2 hours of theory and 12 to 14 hours of practical vehicle operation. 3. Subject 3: 24 credit hours, including 16 hours of theory and 24 hours of practical vehicle operation. 4. The daily study time for the driver's license must not exceed 4 credit hours. Additional information: When students practice in the car, they must fingerprint on the check-in calculator installed in the training vehicle and swipe the time card. After finishing the practice, they must swipe the card again. The card will record the student's driving practice time. Only when the required hours are met can the student schedule the exam.
13
5
Share

Differences Between Volkswagen Talagon and Teramont?

The main differences between Volkswagen Talagon and Teramont are as follows: Launch time differs: Teramont debuted in March 2017, while Talagon was officially launched in June 2021. Price varies:
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.