Where is the wiper of Mercedes-Benz e300?

2 Answers
EmilioFitz
09/05/25 8:13am
The wiper control lever of Mercedes-Benz e300 is located on the lower left side of the steering wheel. How to use the wiper: By pushing the control lever up and down, you can control the wiper's wiping state (intermittent, off, auto, and high/low speed). If it is in the auto-adjustment state, you can change the sensitivity of the rain sensor wiper control by rotating the adjustment knob, thereby adjusting the wiper's wiping frequency. As for the front windshield washing, just gently pull the control lever toward the driver, and the windshield washer and wiper will work simultaneously. Precautions for using the wiper: If you find that the windshield washer fluid is not spraying out but the wiper is working, do not continue to press the button. At this time, you should check whether the windshield washer fluid warning light is on. If it is, you should replenish the windshield washer fluid in time.
Was this review help?
9
5
Share
DelAmelia
09/17/25 8:25am
I've been driving the Mercedes E300 for quite some time now, and the windshield wiper control is conveniently located on the right-hand stalk behind the steering wheel—just a natural reach for your right hand. Operation is straightforward: a gentle push downward activates a single wipe, perfect for light drizzles; pushing upward offers two speed settings (low and high), which work wonders during heavy rain by clearing the windshield swiftly and thoroughly. The stalk’s tip features a rotary knob—twist it to spray washer fluid, a lifesaver in foggy or dusty conditions. Its ergonomic placement ensures seamless use even while turning the wheel, enhancing focus and safety on highways. For new drivers, I’d recommend practicing the motions a few times to build muscle memory—Mercedes’ thoughtful design here eliminates rainy-day fumbling, making it a standout detail.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What are the differences between Santana and Lavida?

The differences between Santana and Lavida are: 1. Different power: Santana is equipped with a 1.5L naturally aspirated engine; Lavida is equipped with 1.5L naturally aspirated, 1.2L turbocharged, and 1.4L turbocharged engines. 2. Different tire specifications: Santana's tire specification is 175/70R14; Lavida's tire specification is 205/55R16. 3. Different body dimensions: Santana's body dimensions are length 4475mm, width 1706mm, height 1469mm, and wheelbase 2603mm; Lavida's body dimensions are length 4670mm, width 1806mm, height 1474mm, and wheelbase 2688mm.
16
5
Share

Is it necessary to use a steering wheel cover?

It is not necessary to use a steering wheel cover for the following reasons: 1. It can cause irreparable damage to a genuine leather steering wheel; 2. It may lead to an inability to firmly grip the steering wheel or cause slipping while driving. The steering wheel is a wheel-shaped device used to control the direction of travel, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The correct way to use the steering wheel is: 1. Place both hands symmetrically on both sides of the steering wheel, at approximately the 9 o'clock and 3 o'clock positions; 2. Rest the thumbs naturally on the inner rim of the steering wheel. The functions of the steering wheel include: audio control, cruise control, and instrument data switching.
2
4
Share

What are the length and width of the 2019 Camry?

The length and width of the 2019 Camry are: 4885 millimeters and 1840 millimeters, with a height of 1455 millimeters, a wheelbase of 2825 millimeters, and a fuel tank capacity of 60 liters. The Camry is a mid-size car under GAC Toyota. Taking the 2019 Camry Modified 2.0E Elite Edition as an example, it is equipped with a 2.0L naturally aspirated inline 4-cylinder engine, with a maximum power of 131 kilowatts and a maximum power speed of 6600 revolutions per minute. The 2019 Camry Modified 2.0E Elite Edition is paired with a 10-speed continuously variable transmission, with a front suspension using a MacPherson independent suspension and a rear suspension using an E-type multi-link independent suspension.
8
2
Share

What is the identification for fully synthetic engine oil?

Fully synthetic engine oil does not have a specific identification mark, but the bottle will be clearly labeled with the words 'fully synthetic'. The functions of fully synthetic engine oil are: 1. Between the piston and cylinder of the engine, as well as between the main shaft and bearing bush, there exists rapid relative sliding. The engine oil forms a sufficiently thick oil film between the two sliding surfaces to separate the relatively sliding parts and reduce wear; 2. It carries heat back to the oil tank and then dissipates it into the air, assisting the radiator in cooling the engine; 3. It circulates carbon deposits, sludge, and worn metal particles from engine components back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil; 4. It provides shock absorption and cushioning when the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston chips, connecting rod, and crankshaft bearings. The load is transmitted through the bearing lubrication to cushion the impact load.
10
3
Share

What can be used to clean spark plugs?

Spark plugs can be cleaned using white vinegar, carburetor cleaner, or toilet cleaner. The cleaning methods are as follows: 1. Place the spark plug in a glass container, pour white vinegar to submerge it, soak for 2 to 3 hours, then scrub clean with a hard toothbrush and air dry naturally; 2. Place the spark plug head-down in a glass bottle, spray carburetor cleaner into the bottle until the spark plug is submerged, cover the bottle, wait for about half an hour, then take it out, scrub clean with a toothbrush, and air dry or use a hair dryer to dry; 3. Soak the spark plug ignition electrode directly in pure toilet cleaner, place it in a ventilated environment for 10 minutes, wait until the bubbles gradually decrease, then remove it, rinse with white vinegar, and air dry.
12
0
Share

Which One is the Rear Side Privacy Glass?

Rear side privacy glass refers to the darkened windows on both sides of the vehicle that are coated with a special layer. It is commonly found in high-end cars and luxury business vehicles. Its functions include: 1. Enhancing privacy inside the vehicle; 2. Blocking sunlight to provide passengers with a safer and more comfortable interior environment. Privacy glass is made by applying a metal functional layer through lamination or magnetron sputtering technology, creating a glass film with the highest performance in reflecting solar radiation heat and visible light. Maintenance methods for the glass include: 1. Using specialized or suitable wiper blades to avoid scratching the glass; 2. Using a soft cloth when cleaning the car; 3. Washing the glass with dedicated glass cleaner; 4. Applying heat-insulating film to the glass.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.