Where is the wiper of Audi car?

2 Answers
LeJace
07/29/25 12:57am
Audi's wipers are located below the front and rear windshields, and the wiper switch is generally set on the lever on the right rear side of the steering wheel. Introduction to wipers: The wiper is an important accessory installed on the windshield, and its function is to remove rain, snow, and dust that obstruct the view on the windshield. Therefore, it plays a crucial role in driving safety. Basic structure: The electric windshield wiper is driven by a motor and generally consists of a wiper arm, wiper blade assembly, rubber blade, blade holder, blade supporter, wiper arm spindle, wiper base plate, motor, reduction mechanism, drive rod system, drive rod hinge, wiper switch, and wiper switch knob.
Was this review help?
17
3
Share
DeDylan
08/12/25 5:07am
I've been driving an Audi for a while, and the wiper control position is actually quite intuitive—it's on the right-hand stalk behind the steering wheel. The first time I drove, it took me a while to find it, but once familiar, I learned that pushing it upward activates the wipers, while pushing it downward adjusts the speed and sensitivity. Audi's wiper system is designed very user-friendly—for instance, switching to high-speed mode during heavy rain and using intermittent settings for lighter rain ensures clear visibility. Speaking of the wiper stalk, it usually integrates the washer and intermittent functions, operated with just a light flick. If the wipers suddenly stop working, remember to check if the washer fluid is empty—this little trick has saved me from a few awkward moments. Regularly inspecting the wiper blades for wear is also crucial; replacing them when worn ensures clear vision, which directly impacts driving safety. Changing the blades is simple—just buy the right model and do it yourself, saving money and hassle.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

Is the Mazda CX4 a domestic model?

Mazda CX4 is not a domestic model, but a joint venture car. It is a niche joint venture automobile brand model under Mazda, produced by FAW Mazda in Changchun. The Mazda CX4 is positioned as a compact SUV, with body dimensions of 4633mm in length, 1840mm in width, and 1535mm in height, and a wheelbase of 2700mm. The Mazda CX4 is equipped with Skyactiv-G 2.0L and 2.5L naturally aspirated engines, featuring water-cooled inline 4-cylinder DOHC 16-valve configuration, paired with a six-speed manual or six-speed automatic transmission. It also comes with the Mazda Connect infotainment system and the i-ACTIVSENSE Mazda Intelligent Safety Assist System.
2
2
Share

What Are the Consequences of Water Entering the Engine?

Engine water ingress can lead to the following consequences: 1. Engine connecting rod deformation, resulting in shortened piston stroke and insufficient gas compression; 2. Piston rings losing elasticity or failing to seal, causing air leakage and compressed gas entering the crankcase; 3. Intake and exhaust valves failing to seal properly when closed, leading to compressed gas leakage into the intake and exhaust manifolds. Precautions after engine water ingress include: 1. Do not start the engine immediately; tow the vehicle to a safe location; 2. Tow the car to a repair shop for servicing; 3. Replace the engine oil and clean related engine components. Engine maintenance methods include: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Periodically remove carbon deposits from the car; 5. Replace the three filters on time; 6. Maintain reasonable engine speed.
16
4
Share

Can Run-Flat Tires Still Be Driven When Flat?

Run-flat tires can still be driven when flat. Relevant information is as follows: 1. Driving: Even if the air pressure in the tire is completely lost, you can still continue driving at a speed of 80 km/h without immediately replacing the tire. 2. Driving Distance: Run-flat tires can still travel up to 250 kilometers after a puncture. In reality, if encountering significant damage (such as being punctured by a large sharp object) or poor road conditions, the driving distance may be reduced to several tens of kilometers, typically within the range of around 100 kilometers. The reason run-flat tires do not collapse after losing air is mainly due to their thickened rubber sidewalls. Even without air pressure, the sidewalls can support the vehicle's weight, preventing severe deformation. Therefore, a punctured run-flat tire does not significantly affect the vehicle's driving, and the driver might not even notice it.
16
2
Share

What causes the engine vibration in the Tayron?

The Tayron is equipped with a direct injection engine, which tends to exhibit more noticeable vibration compared to naturally aspirated engines. If the vibration is steady and rhythmic, it is considered normal. However, if you observe a significant increase in vibration or persistent symptoms, it is advisable to inspect and repair the vehicle. Common causes of engine vibration include engine misfire, deterioration or loosening of engine mounts, carbon buildup, and fuel system malfunctions. The Tayron is a mid-size SUV under the Volkswagen brand, with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. The Tayron lineup features three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
9
0
Share

What are the causes of cylinder liner cracks?

Causes of cylinder liner cracks, apart from manufacturing factors, are primarily due to improper assembly and operational usage. The specific reasons are as follows: 1. Insufficient cooling water: If the diesel engine is operating with a severe shortage of cooling water and cold water is suddenly added to the radiator, the cylinder liner material may contract abruptly, leading to cracks. 2. Overload operation: Prolonged operation of the diesel engine under overload conditions causes a sharp increase in mechanical and thermal stress, which can also result in cylinder liner cracks. 3. Improper operation: If the diesel engine driver or operator forgets to drain the cooling water inside the engine body during winter, the surrounding cooling water may freeze and expand, causing the cylinder liner to crack. 4. Human error: If maintenance personnel do not assemble the cylinder liner according to technical requirements, causing misalignment within the engine block, it can also lead to cylinder liner cracks.
1
5
Share

How much refrigerant should be added to a Peugeot 307?

Approximately 750g. Here is some relevant information about the Peugeot 307: 1. Powertrain: The Peugeot 307 is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 117 hp, maximum power of 86 kW, and maximum torque of 150 N·m. 2. Fuel consumption: According to the official combined fuel consumption data, the Peugeot 307 has a combined fuel consumption of 7.3L/100km. 3. Transmission: The Peugeot 307 offers a choice between a 5-speed manual transmission and a 4-speed automatic transmission with manual mode. In terms of suspension, the front suspension of the Peugeot 307 is a MacPherson strut independent suspension, while the rear suspension features a deformable crossbeam with a stabilizer bar.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.