Where is the wiper motor energy saver located on the Geely King Kong?
3 Answers
The wiper motor energy saver on the Geely King Kong is located under the dashboard or directly integrated into the combination switch. Introduction to wipers: Wipers, also known as windshield wipers or windscreen wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Function of the motor energy saver: The motor energy saver is a temperature control device mainly composed of a thermistor. When the temperature is too high, the energy saver automatically cuts off power to the heater. When the temperature is too low, it automatically restores power to maintain a constant temperature while ensuring energy savings. For example, the automatic switch of an electric rice cooker is composed of an energy saver.
As a friend who frequently tinkers with cars, I think asking about the location of the wiper motor power saver is likely referring to finding a fuse or relay. The exact position may vary slightly depending on the model year of the Geely King Kong, but typically that power-saving component is hidden in the engine compartment's fuse box. The specific location is at the front right of the engine bay, near the windshield. When you open the fuse box cover, you'll see a cluster of fuses and relays; the wiper motor fuse is usually a marked one, such as 30A or 40A. If the fuse is blown, the wipers won't move. I recommend turning off the car's power first, then using needle-nose pliers to check if the fuse is melted, and replacing it if necessary. Additionally, the relay might be nearby, responsible for controlling the current flow. Remember to test it before driving in rainy weather to avoid issues on the road. Keeping a multimeter in your car repair toolkit is very practical. If you can't locate it, refer to the owner's manual or visit a professional shop to avoid damaging the wiring.
As a seasoned driver who's been behind the wheel of a Geely King Kong for several years, I recently encountered a wiper malfunction caused by the power saver position issue. The culprit is actually located in a small fuse box beneath the driver's seat, though it might also be in the engine compartment. I'd recommend first checking the storage compartment in front of the seat for the manual – the diagrams there clearly mark its location. Wiper fuses are prone to blowing due to water ingress or overload. When mine failed during rainy driving, I immediately pulled over to inspect; just pull out the fuse to check if the metal filament is broken, and replacing it solved the problem. The relay is usually in the same box – handle it gently when removing or inserting. Regular cleaning of the wiper system is crucial as dust accumulation increases the load. Remember, car repairs require patience – slow and steady wins the race. When in doubt, consulting your 4S shop is always the safest approach.
