Where is the wiper fuse located in the Volkswagen Magotan?

1 Answers
LaEdward
07/29/25 2:28pm
Magotan wiper washer motor fuse location: In the fuse box on the left side of the engine compartment, open the cover, and you will see clearly marked inside the cover indicating which component's fuse is where. If there is a malfunction causing it not to work, first check the wiper gear shift on the combination switch, then use the body controller to send a signal to the wiper motor to observe whether the wiper moves. There are three main points if the wiper does not work: 1. Control issue with the body controller. 2. Problem with the wiper motor. 3. Issue with the combination switch.
Was this review help?
4
2
Share
More Forum Discussions

What is the reason for the car starter making noise but failing to start the engine?

Car starter making noise but failing to start the engine is due to battery issues. 1. Concept: The battery converts electrical energy into mechanical energy, driving the engine flywheel to rotate and achieve engine startup. Before the engine can operate under its own power, it must rely on external force for rotation. The process by which the engine transitions from a stationary state to self-sustained operation with external assistance. 2. Working principle: As covered in middle school physics, it's an energy conversion process based on Ampere's Law, where a current-carrying conductor experiences force in a magnetic field. The motor includes essential components such as armature, commutator, magnetic poles, brushes, bearings, and housing.
12
3
Share

What causes the Audi EPC light to illuminate and the car to fail to start?

Issues with the electronic throttle or accelerator pedal. Here are the detailed explanations: 1. Persistent fault light: The EPC fault light staying on indicates a malfunction in the engine management system or electronic control, often accompanied by unstable idling or cold start engine shaking. This is usually caused by a dirty driving environment. It is recommended to drive to a repair service station as soon as possible for inspection, and cleaning the throttle body can resolve the issue. 2. Light during inspection: The EPC indicator light will illuminate when the ignition is turned on for a functional check. If this light comes on while driving, it signifies a fault in the engine's electronic power control system. Immediate engine inspection is necessary. Possible causes of EPC faults include a dirty throttle valve body, vacuum leaks in the intake system, a damaged brake switch, or failure to upgrade the engine software in time.
1
5
Share

What Causes the SRS Airbag System Malfunction?

SRS light if it stays on constantly, it indicates a problem with the car's airbag system. To ensure driving safety, you must drive slowly and promptly conduct repairs to eliminate the SRS warning light; when the battery voltage is too low, it can also cause the SRS indicator light to turn on. If the generator can charge normally, the SRS indicator light will automatically turn off once the voltage returns to normal. Below is relevant information: 1. Airbag: An airbag is a vehicle occupant restraint system, using a cushion designed to inflate quickly during a collision and then deflate rapidly. It consists of an airbag cushion, a flexible fabric bag, an inflation module, and an impact sensor. The purpose of the airbag is to provide a soft cushion and restraint for occupants during a collision event. It can reduce injuries between passengers and vehicle occupants. 2. Function: Airbags are installed in three directions inside the vehicle: front (driver and passenger seats), side (front and rear seats inside the vehicle), and roof. The function of the airbag is to reduce the degree of injury to occupants when a vehicle collision occurs, prevent secondary collisions among occupants, or avoid being thrown out of the seat in dangerous situations such as vehicle rollovers.
12
0
Share

Is it necessary to install window film?

Automotive window film, also known as solar film or explosion-proof film, is highly recommended. Its primary functions include blocking ultraviolet rays, reducing heat transmission, filtering glare, preventing glass shattering injuries, and providing one-way visibility for privacy protection. Below are the key benefits of automotive window film: 1. Heat and sun protection: The film effectively blocks a significant amount of infrared heat. 2. UV protection: Medium and long-wave ultraviolet rays can penetrate thick glass, but installing heat-resistant film can block most UV rays, protecting skin from damage and slowing the aging of car interiors. 3. Safety and explosion-proof: The film's base layer is made of polyester, offering excellent tear and puncture resistance. Combined with the adhesive layer, it enhances glass strength to prevent injuries caused by accidental glass breakage. 4. Anti-glare: Reduces accidents caused by glare factors.
4
5
Share

What does Audi check mean?

Audi check is the vehicle's self-inspection function. Here are the specific details: 1. Introduction to check: After pressing this button, the car's control computer will inspect various systems. If any system malfunctions, it will be displayed on the instrument panel to alert the driver. 2. Function: When the car key is inserted and turned to the ACC position, all indicators on the dashboard will light up, including the yellow engine indicator. This is a check of the components related to these indicators. After a few seconds, if there are no faults, these indicator lights will automatically turn off. Then you can normally start the car.
2
5
Share

What is the lifespan of the Audi DL382 wet dual-clutch transmission?

Audi's wet dual-clutch transmission has a lifespan of approximately 20 years. Here are the specific details: 1. Dual-clutch transmission: It is divided into dry dual-clutch and wet dual-clutch types. Although the names differ, their working principles are largely similar. Both involve two clutches alternately switching gears, but the medium transmitting between the driving and driven discs differs. The dry dual-clutch transmission uses air for transmission, while the wet dual-clutch transmission uses oil. 2. Performance: The dry dual-clutch transmits power through direct contact of metal plates, resulting in more direct power transmission. When the metal plates are pressed together, the transmission ratio increases, leading to significant transmission efficiency. The wet dual-clutch, immersed in oil, increases transmission resistance, making its efficiency lower than that of the dry dual-clutch. The wet dual-clutch transmission must include a hydraulic pump, lubricant, cooling pipes, and an external cooling system. In contrast, the dry dual-clutch, by omitting these hydraulic systems, offers advantages in manufacturing cost and weight reduction.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.