Where is the Windshield Wiper?

1 Answers
TuckerAnn
07/29/25 9:51pm
The windshield wiper is located on the right side of the steering wheel. Pushing it upwards once activates intermittent wiping, and the further you push it up, the faster the speed. Pulling it all the way down stops the wiper. The wiper assembly includes components such as the motor, reducer, four-bar linkage mechanism, wiper arm spindle, and wiper blade assembly. Below is relevant information about windshield wipers: 1. Wiper Principle: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The worm gear mechanism serves to reduce speed and increase torque, with its output shaft driving the four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion. 2. Wiper Function: The wiper is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
Was this review help?
9
5
Share
More Forum Discussions

Where is the trunk switch of the Volkswagen Tayron located?

The trunk switch of the Volkswagen Tayron is located on the driver's door handle. Press the central locking unlock button to manually open the trunk. Below is more information about the Volkswagen Tayron: 1. The Tayron is equipped with BorgWarner's fifth-generation electronically controlled multi-plate clutch central differential. During driving, the vehicle can achieve 100% rear-wheel power output under extreme conditions, ensuring excellent off-road performance. The Tayron also offers four road driving modes, two off-road modes, and one snow mode. 2. The Tayron is powered by a 1.4T and 2.0T high/low-power engine. The entry-level model is equipped with a 1.4T engine, model EA211, with a maximum power of 110kW and a maximum torque of 250 Nm.
2
3
Share

How to Adjust the Time on the Buick GL8?

Here is the method to adjust the time on the Buick GL8: 1. Press and hold the time adjustment button "HR" on the CD player; 2. Once the time starts flashing, press the "HR" button briefly to make adjustments. Detailed information about the Buick GL8 is as follows: 1. The Buick GL8 is a 5-door, 7-seater MPV with body dimensions: length 5238 mm, width 1878 mm, height 1776 mm, a wheelbase of 3088 mm, and a fuel tank capacity of 60 liters. 2. Powertrain: Equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum power of 174 kW at 5000 rpm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
18
2
Share

How to Adjust the Height of the Baojun 730 Steering Wheel?

Baojun 730 steering wheel height adjustment method is as follows: 1. Locate the locking handle, then push the locking handle downward to unlock the steering wheel. 2. Adjust the steering wheel to a suitable position, ensuring it faces the driver's chest directly and allows the driver to see all the instruments and indicator lights on the dashboard. 3. Then push the locking handle in the opposite direction to lock it. 4. Finally, try moving the steering wheel in all directions to confirm if it has been securely locked. Below is more information about the Baojun 730: 1. The front suspension of the Baojun 730 uses a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension. 2. The Baojun 730 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine features DVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. This engine is paired with either a 6-speed manual transmission or a CVT transmission.
9
2
Share

Which button to press to check tire pressure on Geely Boyue?

Geely Boyue's tire pressure monitoring button is located at the top of the lever below the steering wheel on the left side, featuring a round button. The tire pressure monitoring display can be viewed on the instrument panel. Below are the principles of automotive tire pressure monitoring: 1. Direct tire pressure monitoring uses pressure sensors installed in each tire to directly measure tire pressure, transmitting pressure information from inside the tire to a central receiver module via wireless transmitters to display data for each tire's pressure. 2. Indirect tire pressure monitoring works by detecting when a tire's pressure decreases, causing the vehicle's weight to reduce the rolling radius of that wheel, leading to faster rotation compared to other wheels. By comparing rotational speed differences between tires, it monitors tire pressure. 3. Characteristics of both types: Each has its advantages and disadvantages. Direct tire pressure monitoring offers more advanced features, allowing real-time measurement of actual instantaneous pressure inside each tire and easy identification of faulty tires. Indirect systems are relatively cheaper, requiring only a software upgrade for vehicles already equipped with 4-wheel ABS (each tire equipped with a wheel speed sensor).
13
4
Share

What kind of engine oil is suitable for Haval H6?

The original factory engine oil brand for Haval H6 is SL-grade 10W-40 oil from French company Total. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, or Total. The oil models recommended in the official Haval H6 manual are 10W-40 and 15W-40. Any oil model that meets these two specifications can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better the oil can maintain its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in Haval H6 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover filler port, generally filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
10
5
Share

Which one is the fog light on Ford Focus?

Ford Focus fog lights are located near the ground level at the front of the vehicle, below the headlights. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, hence fog lights require light sources with strong penetration capability. Below is more information about automotive lighting: 1. Headlights: Combined headlights are positioned at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe nighttime driving. 2. Combined taillights: Located at the rear of the vehicle, mainly functioning for illumination and signaling. 3. Turn signals: Lights used to indicate left or right turns to other road users. 4. License plate lights: Primarily designed to illuminate the license plate, allowing people to identify the vehicle registration in darkness.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.