Where is the windshield washer fluid reservoir located in the Sylphy?

1 Answers
StAna
07/29/25 10:58pm
The windshield washer fluid reservoir in the Sylphy is located at the lower left corner of the engine compartment. When refilling the washer fluid yourself, it's important to choose the appropriate type: use antifreeze washer fluid in winter, and for high-concentration washer fluid, dilute it with water according to the specified ratio before refilling. In dusty environments or when driving on highways during rainy days, the washer fluid will be consumed more quickly, so it's advisable to check the fluid level regularly. The Sylphy has a body length of 4631mm, width of 1760mm, height of 1503mm, and a wheelbase of 2700mm. It is equipped with a 1.6-liter turbocharged engine (engine code HR16) and is a compact family car under the Nissan brand.
Was this review help?
17
5
Share
More Forum Discussions

Do I Need to Change License Plates When Transferring Vehicle Ownership?

Yes, license plates need to be changed. Article 12 of the "Motor Vehicle Registration Regulations" stipulates that when the vehicle management office handles the modification registration of a motor vehicle, if the license plate number needs to be changed, the original license plates and vehicle license will be reclaimed, a new motor vehicle license plate number will be assigned, and new license plates, vehicle license, and inspection qualification marks will be reissued. Article 13: If the domicile of the motor vehicle owner moves out of the jurisdiction of the vehicle management office, the office shall, within three days from the date of acceptance, annotate the changes on the motor vehicle registration certificate, reclaim the license plates and vehicle license, issue a temporary license plate valid for 30 days, and hand over the motor vehicle files to the owner. The motor vehicle owner must apply for the transfer of the motor vehicle to the local vehicle management office at the new domicile within the validity period of the temporary license plate. Documents required from the original owner for a used car transfer include: the registration certificate, vehicle license, and ID card. The buyer needs to provide an ID card, and if they are from another region, a residence permit or temporary residence certificate is required. First, the vehicle must be evaluated for transfer. The evaluation fee is generally 1%-2% of the assessed vehicle value, and other costs include fees for license plates and the vehicle license. The original owner's commercial insurance can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. Precautions when purchasing a used car: Incomplete documentation. Complete documentation for a used car includes: the vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax payment certificate, road maintenance fee records, and compulsory insurance. Missing documents like the registration certificate or vehicle license, or unpaid compulsory insurance and road maintenance fees, can cause endless trouble for the buyer. Therefore, if the seller cannot provide complete documentation, the buyer should be especially cautious. Tampering with the odometer. Most buyers judge a vehicle's condition by the odometer, and sellers often take advantage of this by tampering with it. The odometer is not just a record of usage intensity but also an indicator of when other vehicle components were repaired or replaced. If maintenance is based on a tampered odometer reading, it can lead to a series of potential safety hazards. New paint covering damage. When buying a used car, if the vehicle has been repainted and there are signs of repairs around the front, rear, or A, B, and C pillars, it is highly likely that the car was involved in a major accident. Overhauling the engine to inflate the price. Many buyers focus too much on the engine and neglect the overall condition of the vehicle. Sellers exploit this by replacing engine components to make the vehicle appear younger and justify a higher price.
12
4
Share

What is the relationship between steering wheel and wheel rotation?

The steering wheel adjusts the rotation angle of the wheels through the steering gear. Generally, one full turn of the steering wheel results in a wheel turn of approximately 25 degrees. Below is relevant information about car tires: Classification of car tires: Tires can be categorized into approximately 8 types based on vehicle type. These are: PC - Passenger Car tires; LT - Light Truck tires; TB - Truck and Bus tires; AG - Agricultural Vehicle tires; OTR - Off-The-Road tires; ID - Industrial Vehicle tires; AC - Aircraft tires; MC - Motorcycle tires. Car tire replacement standards: Technical standard - tread grooves less than 1.6mm; Mileage standard - 30,000 to 50,000 kilometers depending on road conditions; Time standard - 5 to 8 years.
18
5
Share

How Many Turns for Steering Wheel to Return to Center?

Different vehicles require varying numbers of turns for the steering wheel to return to center, typically ranging from one and a half to two and a half turns. Below is relevant information about the self-aligning torque: Cause: When the wheel rolls, the longitudinal axis aa of the tire contact patch not only shifts a certain distance from the wheel plane but also rotates by an angle α. As a result, the front part of the contact patch is closer to the wheel plane with smaller lateral deformation, while the rear part is farther with greater lateral deformation. Principle: When the lateral force Fy increases to a certain level, some parts at the rear of the contact patch reach the adhesion limit. As Fy further increases, more portions will reach this limit until the entire contact patch undergoes lateral slip. Consequently, the pneumatic trail gradually decreases as the lateral force increases.
7
5
Share

Can the steering wheel be modified?

Steering wheel can be modified. Concept of car modification: Modification refers to altering the external appearance, interior styling, and mechanical performance of the original manufacturer's prototype vehicle according to the owner's needs, mainly including body modification and power modification. Regulations on car modification: Car decoration relates to the vehicle's safety performance, and vehicle modification may have an even greater impact on safety. Before modifying a licensed vehicle, the owner must register and declare the modification to the vehicle management office. The modification can only proceed after the vehicle management office reviews and approves the technical report. After the modification is completed, the owner must also complete the modification change procedures at the vehicle management office.
12
3
Share

How Much Is Half a Turn of the Steering Wheel?

Turning the steering wheel half a turn rotates the wheels approximately 15-20 degrees, while a full turn rotates them about 40 degrees. Below is relevant information about steering wheel usage: Definition: The wheel-shaped device used to control the direction of a vehicle, which converts the force applied by the driver to the edge of the steering wheel into torque and transmits it to the steering shaft. Grip: If the steering wheel is viewed as a clock face, the correct hand position is left hand between 9 and 10 o'clock and right hand between 3 and 4 o'clock. In the event of a collision, this posture provides better support for the body. Material: The frame is usually made of zinc alloy or aluminum alloy, with some manufacturers experimenting with cheaper and lighter magnesium alloys. The frame is produced via die-casting. A few manufacturers still use steel sheet metal for the frame, which is more complex in structure.
1
2
Share

What are the pros and cons of steering wheel covers?

The advantages and disadvantages of steering wheel covers are as follows: Disadvantages of steering wheel covers: Prone to slipping and difficult to control: Using a steering wheel cover reduces friction between the steering wheel and hands. In slippery conditions like rain, snow, or sharp turns, the steering wheel becomes harder to control, increasing the risk of losing grip. This can compromise safety during emergency maneuvers, potentially causing accidents. Permanent damage to leather steering wheels: For leather steering wheels, rubber-fixed covers can cause lasting damage. Advantages of steering wheel covers: Shock absorption: Since steering wheels are generally hard, driving on rough roads can create strong vibrations that transmit discomfort to the driver, potentially affecting heart health. Installing a steering wheel cover can effectively mitigate these vibrations.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.