Where is the windshield washer fluid filling location for the Arrizo GX?

Which is the High Gear, L or H?

L stands for low gear, while H represents high gear. High gear is used when road conditions are favorable, the engine has sufficient power, or the vehicle is lightly loaded. Driving in high gear allows for higher speeds, smaller traction force, higher engine RPM, lower fuel consumption, and reduced engine wear, making it suitable for long-distance travel on good roads. Low gear: Low gear features a large speed ratio and slower driving speed, enabling the drive wheels to obtain greater torque and increased traction. Therefore, it is used when starting, climbing steep slopes, or navigating difficult road sections with high driving resistance. However, low gear results in slower vehicle speed, higher engine RPM, increased engine temperature, and higher fuel consumption. Thus, driving in low gear should not be prolonged. Medium gear: Medium gear serves as a transitional gear between low and high gears. It is typically used when turning, crossing bridges, meeting other vehicles, driving on general slopes, or passing through moderately difficult road sections. However, prolonged driving in medium gear is also not advisable. Downshifting (from high gear to low gear): When downshifting is necessary, reduce the vehicle speed to a certain level, then release the accelerator pedal while depressing the clutch pedal. Shift the gear lever from high gear to neutral, then release the clutch pedal and briefly press the accelerator ("empty throttle"). Next, depress the clutch pedal again and shift the gear lever to the next lower gear. Finally, quickly release the clutch pedal to the semi-engaged position, then smoothly press the accelerator pedal while gradually releasing the clutch pedal to continue driving. The principle of downshifting with "empty throttle" is: more "empty throttle" when the vehicle speed is high, less when it is low; more "empty throttle" when the engine RPM is low, less when it is high; more "empty throttle" on flat roads, less when going uphill.

16

4

Share

Can 95 and 98 be mixed?

92 gasoline and 95 gasoline cannot be mixed because the isooctane content of 92 gasoline and 95 gasoline is different. 92 gasoline is suitable for engines with low compression ratios, while 95 gasoline is suitable for engines with high compression ratios. If 92 gasoline is added to a car that should originally use 95 gasoline, abnormal combustion will occur, leading to knocking. Knocking not only damages the combustion chamber but also directly affects the normal operation of the engine, and in severe cases, may cause engine damage. If 95 gasoline is added to a car that should originally use 92 gasoline, although it will not damage the engine, 95 gasoline is more expensive than 92 gasoline, resulting in waste. The differences between 92, 95, and 98 gasoline: Standard gasoline is composed of isooctane and n-heptane. Isooctane has good anti-knock properties, and its octane number is defined as 100; n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with its octane number defined as 0. If the gasoline is labeled as 92, it means that the gasoline has the same anti-knock properties as standard gasoline containing 92% isooctane and 8% n-heptane. The principles for 95 and 98 are the same. Handling methods for adding the wrong gasoline: If the gasoline added has a higher octane number than the car's specified gasoline, for example, if 95 is added when 92 is specified, you can simply switch back to 92 gasoline after the current fuel is consumed. If the gasoline added has a lower octane number than the car's specified gasoline, for example, if 92 is added when 95 is specified, you only need to add a high anti-knock fuel additive. Of course, you can also directly drain the fuel and refill with 95 gasoline. To find out which gasoline your car requires, you can refer to the car's user manual or check the fuel grade marked on the fuel tank cap.

5

2

Share

Should Automatic Transmission Cars Shift to Neutral at Red Lights?

For longer red lights, you can choose to shift to neutral while waiting, which helps reduce fuel consumption and minimizes wear on the transmission. For shorter red lights, staying in drive (D) is acceptable. Below are some uses and tips regarding the neutral gear: 1. Temporary parking. When the vehicle needs to stop temporarily, such as waiting briefly for someone, shifting to neutral is suitable. For extended waiting periods, it's recommended to turn off the engine. 2. Towing. If the vehicle requires repairs or needs to be towed for other reasons, the gear must be shifted to neutral. 3. Starting and stopping. Using neutral during startup and temporary stops reduces wear on the car.

19

4

Share

What does ESP mean?

ESP is the abbreviation for Electronic Stability Program, which is an extension of the functions of the anti-lock braking system (ABS) and traction control system (TCS) in vehicles. It is also part of the vehicle's active safety system. ESP primarily controls the longitudinal and lateral stability of the vehicle, ensuring that it moves according to the driver's intentions. ESP mainly consists of three major components: sensors, actuators, and the electronic control unit (ECU). The sensors include wheel speed sensors, steering angle sensors, lateral acceleration sensors, yaw rate sensors, and brake master cylinder pressure sensors. The actuators include traditional braking systems and hydraulic modulators. The electronic control unit works in conjunction with the engine management system, allowing for intervention and adjustment of the engine's power output.

4

Share

How to Open the Fuel Tank Cap of Borgward?

Borgward's fuel tank cap can be opened simply by pressing it when the vehicle is unlocked. The fuel tank cap refers to the box on the car used for storing gasoline, which is square in shape, made of stainless steel, and has excellent sealing. It is necessary to clean the fuel tank regularly, as gasoline usually contains impurities. If the fuel tank has not been cleaned for a long time, the mixture inside can become excessive, affecting the use of gasoline and the performance of the car. Borgward cars originated in Bremen, Germany. The Borgward BX7 is one of its models, powered by a 2.0T turbocharged direct injection engine with a maximum power of 165 kW and a maximum torque of 300 Nm, paired with an Aisin 6-speed automatic transmission.

15

0

Share

What is the wading depth of the A6?

Audi A6's wading depth is generally half the height of the tires. The Audi A6 has a rim diameter of 17 inches. When the water depth is one-third of the tire height, you can safely pass through without causing unnecessary damage. Below is an introduction to car wading-related information: Effects: Wading may cause the car's engine to ingest water and stall, and may also damage the vehicle's electronic systems. Damage: If the electronic systems are damaged, it will affect the normal operation of the car. Wading can also affect the car's chassis, leading to rust. If water is ingested by the engine during wading, the engine will stall. If the electronic systems are damaged, they must be replaced immediately; otherwise, it will affect the normal operation of the car.

11

1

Share

Where is the windshield washer fluid filling location for the Arrizo GX?

Which is the High Gear, L or H?

Can 95 and 98 be mixed?

Should Automatic Transmission Cars Shift to Neutral at Red Lights?

What does ESP mean?

How to Open the Fuel Tank Cap of Borgward?

What is the wading depth of the A6?

What do P, R, N, D, L represent as gear positions?

What is the emission standard for the 2018 Superb?

Is it the letter I or the number 1 on the license plate?

Can I Use the Highway Without ETC After Installation?