Where is the windshield washer fluid filler port located on the Hongqi H5?

2 Answers
KatherineDella
09/05/25 8:17am
The windshield washer fluid filler port on the Hongqi H5 is located on the left side of the engine compartment. Lift the hood to see it, which is a filler port with a blue cap. Windshield washer fluid (also known as windshield liquid) is a liquid used to clean the windshield of vehicles and other transportation tools. It is a consumable item in automotive use, mainly composed of water, alcohol, ethylene glycol, etc., and has functions such as cleaning, antifreeze, and anti-fog. The Hongqi H5 is a new car under the Hongqi brand, with a body length, width, and height of 4945mm, 1845mm, and 1470mm respectively. The Hongqi H5 basically continues the design of the Hongqi B-Concept concept car, with an inverted trapezoidal front grille connected to the headlights and embedded with vertical chrome trim strips.
Was this review help?
17
1
Share
AmirRose
09/17/25 8:28am
I've been driving the Hongqi H5 for over three years, and adding windshield washer fluid is a routine task. Its location is on the left side of the engine compartment, easily visible once you open the hood. Near the lower left corner of the windshield, there's a small blue cap, usually marked with a spray icon or the words 'washer fluid.' This design is very intuitive, making it easy to locate quickly. It's recommended to use antifreeze windshield washer fluid, especially in cold regions, to prevent the wipers from freezing and affecting visibility. The location is somewhat distant from the radiator, minimizing the risk of accidental operation. I always check it before long drives to ensure the wiper system is functioning properly—safety comes first. Remember to pour slowly to avoid spills, as overflow could damage engine components.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Where is the tire pressure display for the Changan Uni-T?

The tire pressure information for the Changan Uni-T is displayed in the center of the instrument panel. It provides early warnings for abnormal tire pressure conditions, allowing drivers to monitor the internal status of the tires without leaving the vehicle, ensuring safe driving. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, with alerts for tire leaks or low pressure to ensure driving safety. There are three common methods of tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
17
4
Share

Why is the Buick Verano's air conditioning not cooling?

The reasons why the Buick Verano's air conditioning is not cooling are as follows: 1. The car condenser is too dirty: The condenser is part of the car's air conditioning system, and its main function is heat dissipation. If the driving environment is poor, dust and other dirt can easily adhere to it, leading to poor heat dissipation performance, which in turn reduces the cooling efficiency of the air conditioning. 2. The car's air conditioning filter has not been replaced for a long time: The car's air conditioning filter is a 'filter barrier' for outside air entering the car. If the air conditioning filter is covered with dust, the air output will decrease, and the corresponding cooling effect will be significantly reduced, affecting the car's cooling performance. Moreover, not replacing the air conditioning filter for a long time can also pollute the air inside the car and increase interior noise. 3. The car's air conditioning lacks refrigerant: A lack of refrigerant is also a major reason why the car's air conditioning is not cooling. Once it is determined that the lack of refrigerant is causing the air conditioning not to cool, simply adding the appropriate refrigerant at a car repair shop can solve the problem.
11
0
Share

What is the correct usage of the one-touch window lift function in the Lavida?

Lavida one-touch window lift setting method is as follows: 1. First, click 'Settings' at the bottom right corner of the central control screen. 2. Click 'Door/Window Open/Close'. 3. Click 'Convenience Opening'. 4. There are three setting modes to choose from. After selecting 'All Windows', all vehicle windows will be lifted with one-touch operation. 5. When 'Driver Side Window' is selected, only the driver side window will be lifted with one-touch operation, while the other three windows remain unchanged. 6. When 'Off' is selected, the one-touch window lift function is disabled. The Volkswagen key-operated one-touch window control is relatively simple: to raise all windows, continuously press and hold the lock button on the car key; to lower all windows automatically, continuously press and hold the unlock button on the car key.
13
4
Share

What type of suspension does the Magotan have?

The Magotan features a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Below is a detailed introduction to the Magotan's front and rear suspensions: 1. The MacPherson strut independent suspension is one of the most widely used car suspensions in the world today. This type of suspension primarily consists of a coil spring, shock absorber, and lower control arm, making its structure relatively simple. The MacPherson strut independent suspension is relatively lightweight, allowing the car to better adapt to the road during cornering, thereby improving driving comfort for passengers. 2. The multi-link independent suspension is another common type of suspension. Many mid-sized cars produced by Volkswagen use this suspension, which provides refined road handling and enhances ride comfort. Generally, multi-link independent suspensions are only used in mid-to-high-end cars because these vehicles offer better space performance, and the manufacturing cost of this suspension is relatively high. As a result, small and medium-sized cars on the market typically do not use this type of suspension.
14
0
Share

How Long Can an Engine Last After Cylinder Boring?

Generally, a car engine can last about 3,000 kilometers after cylinder boring. Depending on the assembly condition, it may even last several hundred thousand kilometers. Cylinder boring is a process performed when the engine has been running for a long time, causing severe cylinder wear, which inevitably leads to "oil leakage." This results in symptoms like burning oil, reduced power, and increased fuel consumption, necessitating cylinder boring. Below are some key points about cylinder boring: 1. After cylinder boring, the engine requires a break-in period similar to a new car, covering 2,000 to 3,000 kilometers. The longevity depends on the extent of major repairs and part replacements. If the four key components (piston, piston rings, cylinder liner, and connecting rod bearings) are replaced, the crankshaft and bearings are in good condition, and the valve seals are renewed, the engine can run another 100,000 or even 200,000 kilometers without issues. 2. Cylinder boring is a common repair method for excessively worn dry cylinder liners. Since a thin layer of the cylinder wall is "polished" off, the cylinder diameter inevitably becomes slightly larger.
4
1
Share

How to Adjust the Handbrake on a Cruze?

Handbrake is located at the rear wheels and can only be seen when the car is lifted onto a rack. There is one cable from each of the rear wheels, which then merges into one. At the junction point, there is a screw for adjustment. The Cruze handbrake is self-adjusting, with an automatic adjuster installed inside the wheel hub. Each time the handbrake is pulled, it completes one cycle of adjustment automatically, so generally, no manual adjustment is needed. More details are as follows: 1. The professional term for the handbrake is auxiliary brake, which operates differently from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. 2. Long-term use of the handbrake can cause plastic deformation of the steel cable. Since this deformation is irreversible, prolonged use will reduce its effectiveness and increase the handbrake's travel distance. 3. A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when released, the spring returns to its original length. Long-term use of the handbrake can also cause corresponding deformation of the spring.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.