···
Log in / Register

Where is the windshield washer button on a Mercedes-Benz?

4 Answers
Howard
07/29/25 9:46pm

The windshield washer button on a Mercedes-Benz is located on the turn signal switch. To activate the washer function, pull the wiper control lever toward the driver. If you use it frequently, remember to check the washer fluid level and replenish it promptly when low to avoid dry wiper operation. When the windshield transparency deteriorates, especially during night driving when dust on the glass scatters light, use the washer fluid to maintain optimal visibility. Taking the 2021 Mercedes-Benz C260 Star Edition as an example, its dimensions are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. Powering this model is a 1.5T turbocharged engine paired with a 48V mild hybrid system, delivering a maximum power of 135 kW and a peak torque of 280 Nm.

Was this review help?
16
0
Share
LolaFitz
08/15/25 9:13pm

I remember when driving a Mercedes, the windshield washer button was on the right side of the steering wheel, on the turn signal stalk. Usually, you can gently twist the end of the stalk or pull it upwards to spray water and clean the windshield. If you can't find it at first, don't worry—the location might vary slightly between models, like the C-Class and older S-Class. It's best to sit in the car and get a feel for it first, and avoid testing it on the highway—safety comes first. Once, my button didn't work, and it turned out the fluid reservoir was empty or the nozzle was clogged. After refilling the washer fluid, it worked again. I recommend checking the fluid level every few months—it's a good habit to maintain clear visibility.

Was this review help?
14
0
Share
Expand All
SanMaddox
10/17/25 5:44am

After driving a Mercedes for so many years, I've noticed that the windshield washer button is mostly fixed at the top of the turn signal lever. It's simple to operate—just press it and the spray comes out. If there's no response, it might be due to a stuck button or loose wiring. I usually check if the washer fluid has run out first, then test if other functions on the lever work properly. Mercedes' design is quite thoughtful—some models even automatically clean the headlights when you press and hold the button longer. In winter, remember to use antifreeze washer fluid to prevent the pipes from freezing. It's advisable to familiarize yourself with the button's location when you get a new car to avoid panic while driving. Different models like the GLC or AMG series have similar arrangements.

Was this review help?
13
3
Share
Expand All
TravisAnn
11/30/25 6:28am

When using a Mercedes-Benz, the windshield washer button is always located at the end of the right turn signal stalk. Pressing it activates the cleaning system. The operation is quite intuitive. If you can't find it, it might be due to incorrect settings or a worn-out button. First, check if the fluid reservoir cap is loose to release pressure. After spraying, the wipers automatically work to wipe the windshield dry. While driving, avoid getting distracted by the spray. Different models like the A-Class or E-Class have consistent button placements, making them easy to use. Regular maintenance and keeping it clean can help prevent clogging.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the weight of the Volkswagen Lamando?

The weight of the latest 2022 Volkswagen Lamando L280TSI-DSG models (Cool Spicy Edition, Stylish Spicy Edition, DSG Hot Spicy Edition, and DSG Super Spicy Flagship Edition) is 1450kg. The 2021 facelifted 280TSI-DSG Comfort Edition and 2021 280TSI-DSG Luxury Phantom Edition weigh 1370kg. The 2021 Lamando 230TSI-DSG Trend Edition weighs 1325kg. The weight of a car typically ranges from 1.5 to 2.6 tons. The weight of a car refers to its mass. The curb weight, also known as the "empty weight," is the weight of the car when it is fully equipped according to factory specifications and all fluids are filled. The curb weight is an important design parameter for a car and significantly impacts fuel consumption. Fuel consumption is directly proportional to the curb weight—the heavier the car, the more fuel it consumes. The gross vehicle weight refers to the weight of the car when fully equipped and loaded with passengers (including the driver) and cargo as specified. Reasons for weight differences in sedan engines: Sedan engines are made from materials such as cast aluminum, cast steel, and cast iron. Depending on the vehicle classification, the engine's design displacement, number of cylinders, and weight vary. For the same material, a 4-cylinder engine is lighter than a 6-cylinder engine, a 6-cylinder is lighter than an 8-cylinder, and an 8-cylinder is lighter than a 12-cylinder. Generally, minivan engines are lighter than small car engines, and small car engines are lighter than mid-size car engines. A minivan's engine can be moved by hand and usually weighs less than 100 pounds, while a large truck's engine can weigh several hundred pounds or even over a ton.
19
3
Share

Is the Braking System a Handbrake or Foot Brake?

Cars' foot brakes and handbrakes both belong to the vehicle's braking system. Introduction to the Handbrake: The professional term for the handbrake is auxiliary brake. Unlike the principle of the main brake, it uses a steel cable connected to the rear brake shoes to brake the car. Long-term use of the handbrake will cause plastic deformation of the steel cable. Since this deformation is irreversible, prolonged use will reduce its effectiveness, and the handbrake's travel distance will also increase. Function of the Braking System: To forcibly decelerate or even stop a moving car as required by the driver; to keep a parked car stationary under various road conditions (including on slopes); and to maintain a stable speed for a car moving downhill.
10
4
Share

How to Maintain a Car Engine?

Here are specific methods for maintaining a car engine: 1. Maintain good crankcase ventilation. Most gasoline engines today are equipped with a PCV valve, but airborne contaminants can accumulate around the valve, potentially clogging it. Regularly clean the contaminants around the PCV valve. 2. Change the oil and oil filter regularly. The quality of any grade of lubricating oil will degrade over time during use. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. 3. Clean the crankcase regularly. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Therefore, the crankcase should be cleaned regularly to keep the engine interior clean. 4. Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, ensuring the selected standard meets or exceeds the manufacturer's specified requirements.
17
5
Share

What is the interval duration for two consecutive lane changes?

Consecutive lane changes require a ten-minute interval. Introduction to consecutive lane changes: So-called consecutive lane changes refer to continuing to change lanes before the vehicle body has straightened. Consecutive lane changes are not allowed. The correct way to change lanes is to change to one lane, then drive straight for a distance before changing to the next lane. Turn signals must be used before changing lanes: The primary action before changing lanes is to use the turn signal, but this is often intentionally or unintentionally ignored by many drivers. In traffic accidents caused by lane changes, the main cause is vehicles changing lanes suddenly without using turn signals. This is especially dangerous when driving on highways. Before changing lanes, promptly using the turn signal to alert other vehicles is a good habit that drivers must develop and a reflection of good driving etiquette. Whenever the vehicle's trajectory changes, the turn signal should be used as a basic form of driving communication.
7
1
Share

Will 5 Liters of Antifreeze Mixed with 1 Liter of Water Freeze?

5 liters of antifreeze mixed with 1 liter of water will not freeze. However, adding water to automotive antifreeze reduces its performance. The impurities in water can cause sedimentation, diminishing the antifreeze's normal effectiveness. At lower temperatures, this can lead to pipe freezing, affecting normal operation. How to choose antifreeze: The key indicators are freezing point and boiling point. Market options include -15°C, -25°C, -30°C, and -40°C. Generally, select one that is at least 10°C lower than your region's lowest temperature. Methods to check for antifreeze shortage: Observe the antifreeze warning light on the dashboard. If lit, it likely indicates low antifreeze levels, though high cylinder temperatures could also trigger it. Inspect the antifreeze reservoir. If the level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the level indicators on the antifreeze tank. Normal levels are between the MAX and MIN marks. If below MIN, it indicates a shortage.
17
4
Share

Can cleaned automotive urea barrels be used to store drinking water?

Automotive urea barrels generally need to meet food-grade packaging standards. For example, Calorie automotive urea barrels are made from new HDPE material and can be used to store drinking water or alcohol after thorough cleaning, but it is strongly recommended to ensure they are thoroughly cleaned. Some brands of automotive urea barrels are made from recycled materials, which are harder to clean properly. Barrels that have previously contained other products or have been stored for too long are not recommended for storing drinking water, as they may cause secondary contamination. Introduction to automotive urea: Automotive urea solution is a type of urea that is highly soluble in water. At 20°C, 105 grams can dissolve in 100 milliliters of water, resulting in a neutral pH solution. This means that as long as the automotive urea solution barrel is cleaned with water, it can be used to store drinking water. Functions of urea: It helps treat exhaust gases to reduce pollutants, optimize engine performance, and improve fuel efficiency.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.