···
Log in / Register

Where is the windshield washer button located on the Nissan Qashqai?

4 Answers
DelHope
09/01/25 6:33am
The windshield washer button is usually located on the outermost part of the left/right control lever on the steering wheel. Simply press it to spray washer fluid while the wipers operate simultaneously. Some models don't have a physical button and require pulling the lever toward the driver and holding it momentarily. More details: 1. If washer fluid doesn't spray but the wipers work, immediately stop pressing the button and check if the washer fluid warning light is on. If illuminated, refill the washer fluid promptly. 2. While using tap water temporarily is acceptable, prolonged use is strictly prohibited. Tap water lacks washer fluid's essential properties, most notably lubrication. Initial use may seem harmless, but prolonged usage will visibly scratch the windshield.
Was this review help?
14
3
Share
AdelynDella
09/14/25 2:25am
I've always enjoyed studying the interior details of cars. The windshield washer switch of the Qashqai is located on the slender lever to the right of the steering wheel. Pulling the lever towards yourself sprays cleaning fluid and activates the wipers. The design is quite user-friendly, and I always find it convenient to operate. If you can't find the button, check the end of the lever for a water droplet symbol - beginners might overlook this detail. It's recommended to regularly top up the washer fluid reservoir to prevent the pump from running dry and getting damaged. The Qashqai's system is stable, but it can freeze easily in winter if not using antifreeze fluid. For safety, if your windshield gets dirty while driving, just pull the lever for clearer visibility and peace of mind. During maintenance, don't forget to check if the nozzles are clogged - you can simply clean them with a needle if needed.
Was this review help?
18
2
Share
Expand All
DeAlan
10/28/25 3:08am
As a Qashqai owner, after driving for several years I find this button quite easy to locate. It's integrated into the wiper control stalk on the right side of the steering wheel - just pull the stalk toward yourself to spray water and clean the windshield. If you can't remember the position, no worries, just try pulling the stalk in different directions while driving and you'll definitely trigger it. I regularly top up the washer fluid to keep the reservoir full, preventing dry operation that could affect visibility. Sometimes when the nozzles get clogged and won't spray, I wait until parking to clean them. This simple, no-frills design means new drivers get used to the position after a few drives. Regular maintenance to prevent reservoir leaks is smart practice - don't wait until rainy days when you urgently need it to discover problems.
Was this review help?
4
0
Share
Expand All
JasperMarie
12/11/25 3:24am
When I first started driving, I also couldn't find the button locations. For the Qashqai, it's on the stalk to the right of the steering wheel—just pull it toward yourself to spray water and wipe the windshield. Don't be afraid to try pulling the stalk a few times to get the hang of it. Beginners often forget to refill the water and end up unable to spray, so remember to always keep windshield washer fluid on hand and top it up regularly. Once you're familiar with the location, cleaning the windshield while driving becomes very convenient and improves visibility. Just operate it gently—no need to pull too hard and risk damaging the stalk. For maintenance, check if the nozzles are clogged with dust to prevent interrupted water flow.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Is the fuel consumption of the Big Sheep high?

The fuel consumption of the Big Sheep is not high. As a 400CC displacement motorcycle, its combined fuel consumption is 3.4L. The concept of fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. Factors affecting fuel consumption: Generally, the factors affecting fuel consumption include vehicle condition, driving habits, road conditions, vehicle weight, and load conditions. Actual fuel consumption needs to be considered comprehensively from multiple factors. For example, some drivers drive slowly, accelerate gently, maintain a steady speed, and brake gradually, which may result in relatively low fuel consumption.
8
2
Share

Can Transmission Oil Be Added to Power Steering Fluid?

Transmission oil can be added to power steering fluid, but power steering fluid cannot be added to transmission oil. Below are specific introductions about the two types of fluids: 1. Transmission oil: Automatic Transmission Fluid (ATF) is specifically designed for automatic transmissions. Under normal driving conditions, it should be replaced every 120,000 kilometers, and under harsh driving conditions, every 60,000 kilometers. When replacing, it is best to choose the original ATF, and transmission oils should not be misused or mixed. 2. Power steering fluid: Power steering fluid is a special liquid used in the car's power steering pump. Through hydraulic action, it makes the steering wheel very light, similar to automatic transmission fluid, brake fluid, and shock absorber fluid.
10
3
Share

How to Transfer a Driver's License Registration?

When transferring out of the jurisdiction of the vehicle management office, the office shall annotate the changes on the motor vehicle registration certificate within three days from the date of acceptance. Retrieve the license plate and vehicle license, issue a temporary vehicle license plate valid for thirty days, and hand over the motor vehicle file to the owner. To apply for motor vehicle transfer, the owner must fill out an application form, submit proof of identity, the motor vehicle registration certificate, the motor vehicle file, and present the motor vehicle for inspection. If the inspection validity period has expired at the time of transfer, a safety technical inspection must be conducted at the transfer location, and proof of passing the safety technical inspection and compulsory accident liability insurance certificate must be submitted.
12
1
Share

What lights to use when passing through an intersection at night?

When passing through an intersection at night, use low beam headlights. If passing through an uncontrolled intersection without traffic signals, you should slow down and alternately flash your high and low beams as a signal. When driving on well-lit roads: When driving on well-lit roads, you should use low beam headlights. Additionally, when following another vehicle, use low beams to allow the preceding vehicle to observe the rear through its mirrors. When meeting an oncoming vehicle within 150 meters, switch from high beams to low beams. When driving under poor lighting conditions: If driving at night on roads without streetlights, under poor lighting, or in extreme conditions such as fog, sandstorms, rain, or snow with low visibility, and when not following another vehicle, you should turn on high beams and fog lights. If following another vehicle, use low beams.
10
2
Share

Where is the reserve fuel switch located on a Jialing motorcycle?

The reserve fuel switch on a Jialing motorcycle is located together with the fuel tank switch, marked with "RES" indicating the reserve fuel tank. Turn the key to this position to activate the reserve fuel tank. Introduction to the reserve fuel tank: The so-called reserve fuel does not refer to a hidden compartment within the fuel tank. Instead, when switched to this position, the fuel outlet is set at a lower level, allowing nearly all the fuel in the tank to be utilized. Therefore, this position is typically used when the fuel in the tank is nearly depleted or when the main fuel position (ON) no longer supplies fuel. Introduction to the positions of the motorcycle fuel tank switch: Generally, motorcycle fuel tank switches have three positions: "ON" for the main fuel supply, "OFF" for shutting off the fuel supply, and "RES" for the reserve fuel tank.
1
0
Share

What Causes the Tapping Sound in the Middle of a Underbone Motorcycle Engine?

The tapping sound in the middle of an underbone motorcycle engine is caused by excessive valve clearance and timing chain wear. Below are detailed explanations of these causes: Excessive Valve Clearance: As the engine heats up, the aluminum alloy cylinder head has a higher thermal expansion coefficient than the steel valves. As a result, smaller valve clearances gradually widen. If the valve clearance exceeds the allowable value when the engine cools down, it will produce a tapping sound when heated. Solution: Take the motorcycle to a professional repair shop to adjust the clearance. Timing Chain Wear: Worn timing chains can also cause such abnormal noises, and the sound becomes louder over time. In severe cases, it can lead to skipped teeth and broken valves. It should be replaced promptly.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.