Where is the windshield located?

What kind of engine oil does the Haval H2S use?

Haval H2S's original factory engine oil brand is Total. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, or Castrol. The recommended oil specification for the Haval H2S in the official manual is 5W-30. Any oil that meets this specification can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Haval H2S is as follows: Wait for the engine temperature to drop, which also allows the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some oil to the gasket of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, then check for leaks around the oil drain plug and oil filter. If there are any leaks, perform necessary repairs. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

5

2

Share

Does crossing the line during a yellow light count as running a red light?

Crossing the line during a yellow light does not count as running a red light. Electronic traffic enforcement typically requires at least three photos as evidence to determine a red-light violation, which are then reviewed by traffic police before a final determination is made. The three photos must show: first, the vehicle behind the stop line when the red light is on; second, the vehicle's front wheels crossing the stop line; and third, the entire vehicle having completely passed the stop line. If these three photos demonstrate that the vehicle moved beyond the stop line while the red light was on, the traffic police can confirm it as a red-light violation. Traffic lights, also known as traffic signals, are indicators that guide vehicles and pedestrians on when to proceed or stop. They are usually installed at intersections and other locations requiring traffic control, and generally consist of red, green, and yellow lights.

20

2

Share

Why Do You Smell Gasoline While Driving?

Reasons for this situation include: 1. Overfilling the gas tank; 2. Gasoline pipe leakage; 3. Aging of the rubber pipes in the gasoline purification carbon canister; 4. If a nearby vehicle has a malfunction, the smell of gasoline may drift over; 5. Smelling gasoline during a cold start. If the gasoline smell persists and is strong, there might indeed be a gasoline leak in your vehicle, and you should promptly visit a repair shop or dealer for inspection. Gasoline is a colorless to pale-yellow, easily flowing liquid at room temperature, hardly soluble in water, and flammable. Important characteristics of gasoline include volatility, stability, anti-knock properties, corrosiveness, and cleanliness.

14

1

Share

Do I need to tap the brake when going straight at an intersection in Subject 3?

When going straight at an intersection in Subject 3, you need to tap the brake. You can start tapping the brake before the diamond pattern, approximately 8-10 meters before the zebra crossing. Below are specific details about Subject 3: 1. Introduction: The road safety driving test, commonly referred to as Subject 3, is part of the motor vehicle driver's examination, focusing on road driving skills and safety awareness. The test content varies depending on the type of vehicle license. 2. Content: The test includes preparation before starting, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night.

14

0

Share

Does the Clutch Plate Need to Be Replaced After Burning Smell Once?

The clutch plate does not need to be replaced after burning smell once, as it is a normal phenomenon. High RPM or prolonged operation in a semi-clutch state can cause the clutch plate to burn and emit a foul odor. Below are specific details about clutch plate break-in: 1. Vehicle Speed: For speed, it is sufficient not to exceed two-thirds of the maximum speed. The engine RPM should not exceed 3000-3500 (different automakers have varying requirements for engine RPM). Avoid sudden acceleration and sudden braking. When driving downhill for long distances, pay attention to controlling the speed and do not suddenly use engine resistance to decelerate. For manual transmission models, make gear predictions in advance and avoid shifting at inappropriate speeds. 2. Regular Inspection: During long-term use, due to normal wear of the clutch plate, the free travel of the clutch pedal will gradually increase, so regular inspection and adjustment are necessary. Otherwise, incomplete clutch disengagement may occur, leading to abnormal shifting noises, burning of the clutch plate, and other phenomena.

20

3

Share

Capability of Four-Wheel Drive and Two-Wheel Drive in Climbing?

Here is an introduction about four-wheel drive and two-wheel drive vehicles: 1. Four-wheel drive (4WD) vehicles: (1) As the name suggests, 4WD vehicles are powered by all four wheels. (2) Four-wheel drive cars are more suitable for driving in rainy or snowy weather, mountainous roads, and muddy sections. 2. Two-wheel drive (2WD) vehicles: (1) Two-wheel drive refers to vehicles powered by two wheels, which can be further divided into front-wheel drive and rear-wheel drive. (2) Two-wheel drive vehicles are generally suitable for urban roads, and most family cars currently use two-wheel drive. Additional information: 1. Power: For cars with the same displacement, four-wheel drive vehicles have stronger power than two-wheel drive vehicles. 2. Traction: Four-wheel drive offers better traction than two-wheel drive, allowing it to adapt to various road conditions. Vehicles perform more stably and have sufficient power when driving on poor road conditions. 3. Handling and stability: In four-wheel drive mode, switching between two-wheel and four-wheel drive is possible, making it suitable for some simple off-road activities. Compared to two-wheel drive vehicles, four-wheel drive vehicles provide better handling and stability.

13

4

Share

Where is the windshield located?

What kind of engine oil does the Haval H2S use?

Does crossing the line during a yellow light count as running a red light?

Why Do You Smell Gasoline While Driving?

Do I need to tap the brake when going straight at an intersection in Subject 3?

Does the Clutch Plate Need to Be Replaced After Burning Smell Once?

Capability of Four-Wheel Drive and Two-Wheel Drive in Climbing?

What is the power of the Beijing EU7 electric motor?

What are the correct steps for driving over speed bumps?

Should the Engine Be Turned Off When Refueling a Car?

How many liters of transmission oil does the Audi A6 require?