Where is the window heating switch located on the Audi A5?

1 Answers
HenryLee
07/29/25 11:35pm
Audi A5's window heating control is located on the vehicle's climate control panel. Detailed operation procedure for window heating: There is a specific symbol on the climate control mode switch; First set the climate control to warm air mode, then adjust the mode switch to the correct position. The warm air will blow onto the windshield to achieve the desired effect. Precautions for window heating: Always clear snow from the glass before heating, and ensure any window film installed is high-quality and won't melt or catch fire when heated. If snow isn't removed, the glass may crack due to extreme thermal expansion and contraction; Low-quality window film may melt when the heating elements are activated, potentially causing a fire.
Was this review help?
2
5
Share
More Forum Discussions

Will Making a U-turn on a Crosswalk Be Captured by Cameras?

If there are electronic surveillance cameras, it will be captured as making a U-turn on a crosswalk is a traffic violation. According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," this offense is punishable by a 3-point deduction and a fine of 200 yuan. The basis is Article 49, which states: Motor vehicles are not allowed to make U-turns at locations with signs or markings prohibiting U-turns or left turns, as well as at railway crossings, crosswalks, bridges, sharp curves, steep slopes, tunnels, or other hazardous road sections. Definition of yielding to pedestrians on crosswalks: When pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side of the road should slow down and allow them to pass safely. When pedestrians are waiting outside the boundary line between motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and allow them to pass safely. If pedestrians cross the boundary line between lanes and non-lanes, and vehicles do not stop to let them pass, this constitutes a violation and should be penalized. When pedestrians enter the motorized lane from the crosswalk, vehicles in the adjacent lane should slow down and allow them to pass safely. If vehicles do not stop to yield, this is a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the vehicle lane, and vehicles do not stop to yield, this is a violation and should be penalized. If pedestrians cross the centerline of the road and enter the vehicle lane, and vehicles do not stop to yield, this is a violation and should be penalized. When the road is divided by a median with greenery, and pedestrians are waiting in the central stopping area, vehicles should slow down and allow them to pass safely. Permissible U-turn situations: If there is a clear U-turn sign at an intersection, a U-turn is allowed. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make a U-turn based on the specific situation, ensuring it does not obstruct other vehicles or pedestrians. Intersections without explicit prohibitions on U-turns or left turns allow U-turns: If there is no sign explicitly prohibiting U-turns, a U-turn is permitted. "No explicit prohibition" means the absence of "No U-turn" or "No Left Turn" signs, and the centerline is not solid. In such cases, U-turns are allowed. U-turns are also permitted on yellow grid lines: Yellow grid lines are no-stopping zones marked at intersections prone to congestion due to temporary stops, important facility entrances, and other necessary locations. Stopping on these lines (including waiting for traffic lights) is a violation. Although stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier, in which case they are treated as "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn traffic light, follow it. Only proceed on green.
17
3
Share

How Long After Subject Three Can You Take Subject Four?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the time varies depending on the type of license. For example, for a Class C license: After passing the Subject Three exam, you can take Subject Four on the same afternoon, within 9 days without an appointment, or after 10 days with an appointment. Same Afternoon Direct Exam: Since Subject Four is the theoretical part of Subject Three, most cities schedule both Subject Three and Subject Four together when making appointments. Therefore, on the same afternoon after passing Subject Three, you can directly go to the Subject Four exam site to take the test. 9-Day No-Appointment Exam: With the upgrade of driving test services, some cities have introduced a new model allowing no-appointment exams within 9 days. Candidates who pass Subject Three can take Subject Four within 9 days by presenting their ID at the exam site. Exam staff will group candidates into no-appointment and appointment groups for easier management. Appointment After 10 Days: The success of a Subject Four appointment depends on the current number of candidates, priority levels, and temporary arrangements at the exam site. Candidates closer to their 3-year validity period have higher priority and are more likely to secure an appointment. Unexpected events (e.g., pandemics) may also affect appointment success rates. Subject Four, also known as the theoretical driving test, is part of the motor vehicle driver's license assessment. It covers safe and civilized driving requirements, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods (e.g., tire blowouts), and post-accident procedures. Subject Four Exam Notes: Exam Duration: 45 minutes. Number of Questions: 50 questions (2 points each), proportionally selected from the Subject Four question bank based on the license type. Question Types: Single-choice (including true/false), multiple-choice, and questions with animations, images, scenario recognition, or text descriptions. Retake Notes: Failing Subject Four only requires retaking Subject Four, arranged by the driving school. There are no limits on retakes, and no fees are charged for retakes. Subject Four Exam Tips: Focus on Error-Prone Areas: Identify the reasons for mistakes. For marked questions, avoid memorizing answers blindly. Instead, review regulations, textbooks, or references to understand and correct errors. Categorize Questions: Refer to the question bank analysis to group similar questions. Many questions in the bank are similar and easily confused, so categorizing them (e.g., pedestrian-related traffic signs) helps avoid mistakes. Memory Techniques: Many questions involve numbers. Summarizing these numbers can aid memorization. The driving test consists of three subjects: Subject One (traffic laws and regulations), Subject Two (field driving skills), and Subject Three (road driving skills and safe driving knowledge). Subject Four is the colloquial term for the safe driving knowledge test under Subject Three, not a separate subject. The safe driving knowledge test is conducted after Subject Three.
15
2
Share

How Long Does an ETC Battery Last?

It can last for 3 years. Currently, ETC devices are powered either by solar charging or via a charging cable. If any quality issues arise with the ETC device during the 2-year warranty period, it can be repaired or replaced at ETC bank service outlets. ETC application requirements are as follows: Provide the original and photocopies of the vehicle owner's valid ID card and vehicle license. The photocopy of the driver's license should include the page with the most recent annual inspection stamp. Fill out a credit card application form, which will be used to bind the ETC card. After receiving the credit card, swipe it twice and present the POS slips to claim and install the ETC onboard device for free at designated outlets, with no additional charges. Applicants must be aged between 18 and 60. Own a vehicle registered under a personal name. For company vehicles applying for ETC, the following documents are required: company introduction letter, business license, business license copy, company seal, legal representative's ID, vehicle driver's license, and vehicle registration certificate. These documents can be submitted at various bank outlets or the One-Card Company. Business license or organization code certificate, original company authorization letter for ETC service application with official seal, original and photocopy of the agent's ID, and original vehicle registration certificate. ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure it is smooth, clean, and dry. Then, peel off the OBU adhesive backing and stick it to the installation position, pressing firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of over 10 meters to prevent automatic fee deduction for the wrong vehicle in case of ETC device failure or absence. The ETC lane recognition speed is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed transactions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will render the tag invalid. It can be taken to the bank where the ETC card was issued or a highway service center for inspection. If the issue is not due to human error, reactivation may suffice. When using a debit card for ETC, insufficient balance may cause transaction failures. Follow on-site staff instructions to use manual MTC lanes with cash or card payments. Thick or modified windshields may cause poor signal reception, especially for vehicles that have had windshield replacements after accidents or modifications.
1
5
Share

What Does Four-Wheel Maintenance Include?

Four-wheel maintenance consists of wheel alignment and tire rotation. Wheel alignment refers to adjusting the relative positions of the wheels, steering system, and front/rear axles to their standard specifications, as these positions may shift due to driving habits, road conditions, and other factors. Proper alignment ensures driving stability and safety. Tire rotation involves swapping the positions of the wheels. For front-wheel-drive vehicles, the typical rotation pattern is: left rear to right front, right rear to left front, left front to left rear, and right front to right rear. This process promotes even tire wear and extends tire lifespan.
13
2
Share

What are the differences between China V and China VI?

The differences between China V and China VI emission standards are as follows: Different emission standards: China VI emission standards are more than 30% stricter than China V. Excluding the influence of driving conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China V standard was implemented nationwide on January 1, 2017, as the fifth stage of national motor vehicle emission standards. The China VI standard has been implemented since July 1, 2019. Different principles: In the China V stage, diesel and gasoline vehicles had different emission standards, but China VI adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing departments: The China V standard was issued by the Ministry of Environmental Protection. The China VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China V is represented by the letter V, while China VI is represented by the letters VI. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China V, China VI has improved monitoring requirements for plug-in hybrid electric vehicles, including regulations on energy storage systems, thermal management systems, brake regeneration, drive motors, generators, etc. China V standard limits are as follows: Gasoline vehicles must not emit more than 1,000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China VI has two standards: China VIa and China VIb. The details are as follows: China VIa standard limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China VIb standard limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 milligrams of PM fine particles per kilometer driven. Affected by the China VI emission policy, although China V vehicles are not currently restricted from normal use, such as travel or license plate restrictions, their resale value will be significantly impacted. For truck owners, if they purchase a truck on loan for cargo transport, the depreciation of the vehicle after repaying the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China VI vehicles, which have a longer service life and more road rights, are more advantageous.
20
5
Share

Which car has a logo resembling a snake?

The car with a snake-like logo is the Alfa Romeo, which is manufactured in Italy. Models under the Alfa Romeo brand include: Alfa Romeo 147, Alfa Romeo GT, Alfa Romeo 156, Alfa Romeo 159, Alfa Romeo Stelvio, and others. Taking the 2020 Alfa Romeo 147 as an example, it is a compact car with the following dimensions: length 4170mm, width 1729mm, height 1421mm, wheelbase 2546mm, fuel tank capacity 60 liters, trunk capacity 280 liters, and a curb weight of 1190kg.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.