Where is the water temperature sensor located on the Landwind X7?

1 Answers
VonJames
07/28/25 10:55pm
Landwind X7 water temperature sensor is installed on the water jacket of the engine block or cylinder head. The following is an introduction to the Landwind X7 water temperature sensor: Function of the Landwind X7 water temperature sensor: The Landwind X7 water temperature sensor is in direct contact with the coolant inside the car and is used to measure the coolant temperature of the engine. Resistance value of the Landwind X7 water temperature sensor: The temperature sensor used in the coolant temperature gauge is a negative temperature coefficient thermistor (NTC), whose resistance decreases as the temperature increases. One wire is connected to the electronic control unit (ECU), and the other is a ground wire.
Was this review help?
3
4
Share
More Forum Discussions

Is the Gasoline from Small Gas Stations Harmful to Cars?

What kind of gas station does this small gas station refer to? There is one type of small gas station that has legal procedures, and the oil comes from regular channels such as Sinopec or PetroChina; there is also another type of gas station that is said to come from gas stations, but the oil is "delivered to your door" through private cars, or you can refuel at some non-standard gas station locations. Of course, there are also some that are simply irregular gas stations. The former can be used, while the latter should be avoided as much as possible. It is best to refuel the car before the fuel light comes on. The following is a detailed explanation of the car's fuel light: 1. Remaining gasoline: Generally, when the fuel light turns yellow, there is still 1/10 of the gasoline left in the tank. The fuel tank capacity of an ordinary car is generally between 40-60L. The fuel tank capacity of an ordinary SUV is between 50-60L. According to the calculation of 1/10 of the remaining fuel in the car, when the fuel light comes on, a car has about 4-6L of gasoline left; an SUV has 5-6L of gasoline left. 2. Driving distance: Because driving habits are different and the road sections are also different, bad driving habits, long periods of idling, and parking will all increase fuel consumption. Conservatively estimated, if the fuel light has come on, you can generally drive about 30~50 kilometers.
13
1
Share

How to Use Auto Hold Function Most Effectively?

When passing through multiple traffic light intersections, activating the auto hold function can save more fuel. Below are relevant details about auto hold: 1. Introduction: It refers to an automatic braking function. After enabling this function, such as when stopping at a traffic light, it eliminates the need to pull the handbrake, simplifying operations by avoiding the use of manual or electronic handbrakes. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. 2. Working Principle: When the vehicle is temporarily stopped and needs to restart shortly thereafter, the parking function is handled by the ESP-controlled braking system. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, determining any tendency for the vehicle to roll. It then applies an appropriate braking force to the wheels to keep the vehicle stationary. This braking force is just enough to prevent the vehicle from moving without being too strong, ensuring that there is no severe lurch forward when pressing the accelerator again.
17
0
Share

How to distinguish between the appearance of Accord and Civic?

Introduction to distinguishing the appearance of Accord and Civic: 1. Letters on the rear of the car: Civic is marked as 'civic', while Accord is marked as 'accord'. 2. Vehicle size: The Accord is noticeably larger than the Civic. The Civic is a compact car, whereas the Accord is a mid-size car. Below is a comparison between Honda Civic and Honda Accord: 1. Price: The reason the Civic is priced lower than the Accord is because the Civic is a compact car, also known as an A-segment car, while the Accord is a mid-size car, also referred to as a B-segment car. The Accord is positioned at a higher grade than the Civic, hence the slightly higher price. 2. Vehicle configuration: The Civic is equipped with 1.5 and 1.8 engines, which are quite good, providing sufficient power to meet people's needs with relatively low fuel consumption. It focuses more on the sense of speed, but the space is slightly smaller. The Accord, with its 2.0 and 2.3 engines, has a larger displacement, offering more abundant power than the Civic, and the entire vehicle is also larger than the Civic.
13
4
Share

Will the Iveco timing belt damage the valves if it breaks?

If the Iveco timing belt breaks, it will damage the valves. If the timing belt breaks while the engine is running, the camshaft will not operate according to the timing, which is highly likely to cause the valves to collide with the pistons, resulting in severe damage. To avoid greater losses caused by a broken timing belt, it is essential to regularly inspect and maintain the timing belt. If cracks or fractures appear on the belt, it is best to replace it. Here is an introduction to what happens when a car's timing belt breaks: 1. If the timing belt breaks, the connection between the camshaft and the crankshaft is interrupted. At this point, the camshaft loses power, causing the valve group controlled by it to malfunction. Due to inertia, the pistons will bend the valve stems. If the engine speed is high, the pistons may also suffer from burn damage, and in severe cases, the engine may be completely ruined. 2. When the engine is under heavy load or experiences power surges, the belt is prone to skipping teeth, which may cause valve damage and harm the engine. The optimal belt tension is when it can be pressed down by 10mm and flipped 90 degrees. 3. The timing belt connects the crankshaft on one end and the camshaft on the other. The crankshaft is linked to the connecting rods and pistons, while the camshaft controls the timing of the valves' opening and closing.
9
1
Share

What is the 0-100 km/h acceleration time of the Changan Eado 1.4t?

The 0-100 km/h acceleration time of the Changan Eado 1.4t model is 9.2 seconds. It is a global full-time premium mid-size sedan. Below is relevant information about Changan Automobile: Introduction to Changan Automobile: China Changan Automobile Group Co., Ltd. (abbreviated as China Changan or CCAG), formerly known as China South Industries Automobile Co., Ltd., was established in December 2005. On July 1, 2009, it was renamed China Changan Automobile Group Co., Ltd. It is a large-scale enterprise group formed by the integration and optimization of the automobile industry under China Ordnance Equipment Group Corporation. Business Scope: Design, development, manufacturing, and sales of automobiles, motorcycles, automobile and motorcycle engines, and automobile and motorcycle parts; sales of optical products, electronic and optoelectronic products, night vision equipment, information and communication devices, etc. 0-100 km/h Acceleration: The 0-100 km/h acceleration refers to the time it takes to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, compact cars with 1.6L engines have 0-100 km/h acceleration times between 11 to 13 seconds, mid-size cars with 2.0T engines between 7 to 8 seconds, while supercars mostly have acceleration times of less than 3.8 seconds.
9
5
Share

Which Toyota engine model is used in the Vizi?

It is not a Toyota engine, but a self-developed 8A-CA4GB1 engine. Below is the relevant information: 1. The FAW Vizi is equipped with a four-cylinder, four-stroke, water-cooled, double overhead camshaft; 2. 16-valve, electronically controlled fuel injection 8A-CA4GB1 engine, paired with a mechanical 5-speed manual transmission. 3. The engine has a maximum power of 64 kW at 6000 rpm, 65 kW at 6000 rpm, and a maximum torque of 110 Nm at 5200 rpm, 114 Nm at 2600-3000 rpm, with a fuel consumption of 5 liters per 100 kilometers. Additional information: Maintenance methods for the FAW Vizi engine: 1. Regularly clean the fuel system. During the process of fuel being supplied to the combustion chamber through the fuel lines, it inevitably forms gum and carbon deposits, which accumulate in the fuel passages, carburetor, fuel injectors, and combustion chamber, interfering with fuel flow, disrupting the normal air-fuel ratio, and causing poor fuel atomization, leading to engine issues such as shuddering, knocking, unstable idle, and poor acceleration. 2. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.