Where is the water temperature gauge on the 10th-generation Accord?

1 Answers
LeKimberly
07/30/25 1:54am
The 10th-generation Accord does not have a water temperature gauge. If the water temperature is abnormal, the water temperature warning light on the dashboard will illuminate. The 10th-generation Accord is a mid-size sedan with the following dimensions: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, fuel tank capacity 56 liters, trunk capacity 574 liters, and curb weight 1495kg. The 10th-generation Accord features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194 PS, maximum torque of 260 Nm, and maximum power of 143 kW, paired with a continuously variable transmission (CVT).
Was this review help?
7
5
Share
More Forum Discussions

How to Wire the Cigarette Lighter in Tiggo 3?

The wiring method for the Tiggo 3 cigarette lighter is as follows: 1. First, locate the cigarette lighter interface inside the car. Some cigarette lighter sockets have USB outlets, some directly split into several cigarette lighters, and some have household power sockets. Therefore, when choosing a cigarette lighter socket product, pay special attention to the interface; 2. Secondly, the cigarette lighter receives power from the battery, passing through a 15A fuse, then to the cigarette lighter, which is grounded by the cigarette lighter itself. This completes the circuit. The cigarette lighter will automatically pop out when ignited, and removing the key will not affect it; 3. For installation, you can connect a wire from the car's AC line, then connect it to a fuse, and finally to the positive terminal of the cigarette lighter. The negative terminal can be grounded to the car body. Do not connect directly to the positive terminal of the battery, as this will make it uncontrollable by the key, leaving it in a constant standby state.
3
2
Share

Why doesn't the BYD car automatically fold the mirrors when locked?

If the rearview mirrors of a BYD vehicle do not automatically fold after locking, the possible reasons could be that the automatic folding feature for the rearview mirrors is turned off, which can be enabled through the central control panel, or there might be a fault in the electrical connectors. Below is the relevant information: 1. Function of car rearview mirrors: Car rearview mirrors are located on the left and right sides of the front of the car, as well as inside the front of the car. They reflect the situation behind, to the side, and below the car, allowing the driver to indirectly see these areas. They serve as the 'second pair of eyes,' expanding the driver's field of vision. 2. Standards for car rearview mirrors: Car rearview mirrors are important safety components, and their mirror surface, shape, and operation are carefully designed. There are corresponding industry standards for the quality and installation of rearview mirrors, which cannot be arbitrarily altered.
10
0
Share

Is an oil temperature gauge reading of 120 normal for a BMW?

An oil temperature gauge reading of 120 is normal for a BMW. However, if the coolant temperature reaches 120 degrees, it is abnormal. In such cases, the vehicle should be immediately stopped and turned off to allow the temperature to cool down naturally; otherwise, it may affect the normal operation of the vehicle. When a car is in motion, the combustion of fuel and air mixture in the engine cylinders causes the oil temperature to rise. Engine oil plays a cooling role for the engine, and a temperature around 120 degrees is considered normal. BMW is a German automotive brand under the BMW Group, featuring models such as the i, X, Z, and pure numeric series (1, 2, 3, etc.), along with the M series (BMW's official high-performance division) based on improvements to these models. For example, the BMW X5, the brand's first four-wheel-drive SUV, has dimensions of 4909mm in length, 1938mm in width, and 1772mm in height, with a wheelbase of 2933mm.
10
5
Share

What is the difference between HT tires and AT tires?

AT tires are all-terrain tires, which are designed to balance both off-road and on-road performance. MT tires are mud tires, and the difference between them and AT tires is that MT tires are a more extreme type of off-road tire, heavily favoring muddy terrain and unsuitable for driving in northern regions where most seasons are dry. HT tires are highway tires, designed for on-road driving. Below are the relevant introductions: 1. Characteristics of HT highway tires: HT tires have relatively soft sidewalls and finer tread patterns, offering excellent quietness and comfort. They perform exceptionally well on paved roads and have light off-road capabilities but are not suitable for high-intensity off-roading. 2. Characteristics of AT all-terrain tires: AT tires are designed to be more versatile than HT tires. The tread patterns of AT tires are more rugged, and the spacing between the tread blocks is slightly larger than that of HT tires. The downside of this design is reduced on-road performance and increased noise, but AT tires offer better durability and traction on unpaved surfaces compared to HT highway tires.
16
5
Share

What is the total length of the Audi Q3 body?

The total length of the Audi Q3 body is 4495mm, with a width and height of 1848mm and 1616mm respectively, and a wheelbase of 2680mm. The vehicle features front-engine, front-wheel drive configuration. It utilizes a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Positioned as a compact SUV, the Audi Q3 is equipped with a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power output of 110kW and a peak torque of 250Nm. Additionally, the engine incorporates direct fuel injection technology and employs an aluminum alloy cylinder head and block.
12
4
Share

How often should a new 7-seater vehicle be inspected?

A new 7-seater vehicle should be inspected every two years. You need to bring the vehicle registration certificate, ID card, and a copy of the compulsory traffic insurance policy, and go directly to the vehicle management office. For non-commercial small private passenger vehicles with fewer than 7 seats, the exemption from inspection within the first 6 years means the vehicle is exempt from on-site inspection, but the owner still needs to apply for the inspection compliance label at the vehicle management office, motor vehicle registration service station, or traffic police station within the specified period and affix it to the upper right corner of the vehicle's front windshield. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the safety technical conditions for motor vehicle operation.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.