Where is the water tank located in a Polo?

1 Answers
OHarrison
07/30/25 12:15am
The water tank in a Polo is located in the engine compartment near the right front headlight. The water tank is a crucial component of the cooling system. Below is more information about the water tank: 1. Check the coolant: To ensure the proper functioning of the water tank, the most important step is to check the coolant. Regularly inspect whether the coolant level is between the MAX and MIN marks. If the coolant level is found to be low or significantly depleted, it may indicate a leak in the cooling system, requiring a visit to a repair shop for inspection. 2. Function of the Polo water tank: It stores the coolant and, when the engine is hot, circulates the water inside the tank via the water pump, allowing the coolant to absorb and dissipate the engine's heat. 3. Coolant level: The coolant level directly affects the operation of the cooling system. The coolant added must meet specifications, and different types or colors of coolant should not be mixed. Pure water should only be added as a last resort, as it lowers the freezing and boiling points of the coolant, making the cooling system prone to boiling and reducing its effectiveness. Additionally, adding water can lead to the formation of scale in the cooling system.
Was this review help?
2
3
Share
More Forum Discussions

Is Car Spontaneous Combustion Covered by Insurance?

If a vehicle catches fire spontaneously and the owner has not purchased spontaneous combustion insurance, the insurance company will not compensate. If the owner has purchased spontaneous combustion insurance, the insurance company will handle the claim based on the actual circumstances. Generally, the insurance company will refuse to compensate in the following situations even if spontaneous combustion insurance is purchased: 1. If the vehicle catches fire due to modifications, the insurance company will refuse to compensate. 2. If the vehicle has not undergone the annual inspection on time, the insurance company will also refuse to compensate. Notes: Additionally, if the vehicle's spontaneous combustion is caused by someone else, the responsible party should compensate if they can be identified. If the responsible party cannot be found, the insurance company will cover up to 70% of the loss.
6
5
Share

Is the BAIC Senova X35 Front-Wheel Drive?

The BAIC Senova X35 is front-wheel drive, also known as front-wheel drive (FWD), which refers to a car design where the engine drives only the front pair of wheels. The BAIC Senova X35 is a compact SUV under Beijing Automotive Group. Taking the 2016 BAIC Senova X35 Automatic Luxury Edition as an example, its body dimensions are: length 4300mm, width 1815mm, height 1640mm, with a wheelbase of 2570mm and a fuel tank capacity of 46 liters. The 2016 BAIC Senova X35 Automatic Luxury Edition is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 85kW at 6000 rpm and a maximum torque of 148Nm between 3800 to 4800 rpm.
6
1
Share

What Causes the One-Button Start in Cars to Sometimes Fail to Ignite?

The reasons why the one-button start in cars sometimes fails to ignite are: 1. Low battery in the smart key, resulting in reduced transmission power, making it harder for the in-car sensor to detect; 2. The steering wheel not being straightened after the car is turned off, causing the steering wheel to lock; 3. Insufficient voltage, dead battery, or battery damage. Solutions for when the one-button start fails to ignite are: 1. Use the mechanical key to insert into the keyhole for ignition; 2. Turn the steering wheel left and right while pressing the one-button start to release tension and unlock the steering wheel; 3. Replace the battery or use another battery to start the car; 4. Use the push-start method.
12
2
Share

What are the components of car paint?

Car paint is primarily composed of resin, with various substances added to the system as needed. The introduction to car paint is as follows: 1. Composition of automotive paint: Automotive topcoat generally consists of three parts: electrocoat, primer, and color paint. The topcoat is the outermost layer of automotive coating and the main object of maintenance. 2. Classification by appearance: Mainly refers to the commonly mentioned metallic topcoat and non-metallic topcoat. 3. Types of car paint: Non-metallic paint is also called ordinary solid color paint. Metallic paint is also called metallic flake paint, which contains fine aluminum particles. Pearl paint, also known as mica paint, operates on the same basic principle as metallic paint.
16
1
Share

What Causes the Throttle Pedal to Vibrate When Accelerating?

The throttle pedal vibrates when accelerating due to aging or loosening of the engine mount cushions or carbon buildup in the throttle body. Here are the detailed explanations: Aging or Loosening of Engine Mount Cushions: Engine mount cushions, also known as engine mounts, are typically installed between the engine and the car body, connecting the two and securing the engine in place. Once they age or become loose, they can easily cause resonance during acceleration, leading to vibrations. Carbon Buildup in the Throttle Body: Excessive carbon buildup in the throttle body can result in insufficient valve opening during acceleration, causing abnormal noises and vibrations, along with symptoms of reduced power. It is recommended to clean it promptly.
15
5
Share

How to Prevent Tire Blowouts in High Temperature Conditions?

Methods to prevent tire blowouts in high temperature conditions include: 1. Check if the tire pressure is normal; 2. Remove stones or foreign objects from the tread grooves to prevent deformation of the tire crown; 3. Inspect the tire sidewalls for scratches or cuts that expose the cords; 4. Rotate the tires regularly; 5. The service life of tires should be within 2 to 3 years or approximately 60,000 kilometers. Tires that exceed their service life or are severely worn should be replaced promptly; 6. Avoid prolonged exposure to direct sunlight; 7. Avoid sudden acceleration and hard braking; 8. Do not overload or exceed weight limits; 9. Observe road conditions and avoid muddy or uneven surfaces.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.