Where is the water tank located in a Corolla?

Are Coolant and Antifreeze the Same?

Coolant and antifreeze are not the same. Coolant is added to the auxiliary water tank, ensuring circulation throughout the cooling system, whereas antifreeze is added directly to the radiator. The full name of antifreeze is antifreeze coolant, and it serves the following purposes: 1. Prevents freezing when the vehicle is not running; 2. Cools the engine after startup to prevent overheating and potential engine damage; 3. Manages rust prevention and prevents excessive scale buildup that could clog the pipes. Although coolant is also referred to as antifreeze coolant, it differs from antifreeze. It is crucial to avoid mixing them up during addition, as incorrect usage will inevitably lead to vehicle wear and unnecessary issues. Special attention should be paid to selecting the right brands when adding these fluids to avoid substandard products that could compromise antifreeze or cooling performance.

1

0

Share

What do the letters E and F on the fuel tank represent?

The letters E and F on the fuel tank represent the remaining fuel level in the tank. Here, E stands for Empty, indicating that the fuel in the tank is insufficient or nearly depleted; F stands for Full, indicating that the tank is in a full state. On the fuel gauge of a car's dashboard, the letters E and F are typically used to indicate the remaining fuel level in the vehicle's tank. When the needle on the fuel gauge points to F, it means the car is fully fueled; when the needle points to E, it indicates that the fuel is nearly depleted, and refueling is required. Precautions for refueling a car: Drivers should follow the instructions in the car's manual or the labels on the fuel tank cap to correctly add gasoline. Due to compression ratio considerations, cars requiring high-octane gasoline need fuel with better anti-knock properties. Using low-octane gasoline can cause knocking in the engine cylinders. Even if a car designed for low-octane gasoline is filled with high-octane gasoline, it won't cause knocking, but it may lead to excessive carbon buildup due to insufficient temperature and pressure in the cylinders.

18

2

Share

What Causes Excessive Transmission Temperature?

Reasons for high transmission temperature: 1. Clogged radiator grille; 2. Transmission clutch slipping, generating additional heat; 3. Insufficient flow in transmission cooling oil circuit; 4. Thermostat sticking. Solutions: 1. Clean the radiator; 2. Repair the torque converter; 3. Repair the valve body or replace the oil pump; 4. Replace the thermostat. Additional information: Generally, the active safety features already present in a vehicle's safety system can ensure safe and reliable operation during both normal road and off-road driving. When transmission fluid temperature reaches 115 degrees Celsius, the DTC will set and store information to assist technicians in analysis.

19

0

Share

What is a C3 driver's license?

C3 is a low-speed truck driver's license, which allows driving low-speed trucks. Driving schools do not offer C3 license registration. If you need to take the C3 license test, you must bring all required documents to the vehicle management office to apply. The vehicle management office will arrange for an appropriate formal driving school for learning and examination. The examination process and content for the C3 license are similar to the common C1 license, generally consisting of theoretical knowledge and practical operation. The specific details are as follows: C1: Small and mini passenger vehicles, as well as light and mini cargo vehicles, light and mini special-purpose vehicles, with a vehicle length of less than 6m and seating capacity of no more than 9 people. C2: Small and mini automatic transmission passenger vehicles and light and mini automatic transmission cargo vehicles, with a vehicle length of no more than 3.5m and engine cylinder total displacement of no more than 1 liter. C3: Low-speed cargo vehicles (formerly four-wheel agricultural transport vehicles, light cargo vehicles, with a vehicle length of less than 6m and total mass of less than 4500kg). C4: Three-wheeled vehicles (formerly three-wheeled agricultural transport vehicles, mini cargo vehicles - with a vehicle length of no more than 3.5m and total mass of no more than 1800kg). M: Wheeled self-propelled machinery vehicles.

7

4

Share

What is the working principle of a differential?

The working principle of a differential is: 1. Power input to the differential, where the driven bevel gear drives the rotation of the differential housing; 2. Power output from the differential, where two side gears are connected to the drive shafts (also known as half-shafts) on both sides, transmitting power to the wheels; 3. The rotation of the planetary gears refers to the rotation of the planetary gears around the planetary gear shaft; 4. The revolution of the planetary gears refers to the rotation of the planetary gears around the axis of the side gears. The automotive differential is a mechanism that allows the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right side gears, two planetary gears, and a gear carrier. Its function is to enable the left and right wheels to roll at different speeds when the car is turning or driving on uneven roads, ensuring that both drive wheels perform pure rolling motion. The differential is designed to adjust the speed difference between the left and right wheels.

8

2

Share

What does ACC mean in a car?

In cars, ACC stands for Adaptive Cruise Control. The Adaptive Cruise Control system is an intelligent automatic control system developed from the existing cruise control technology. During vehicle operation, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while the wheel speed sensor collects vehicle speed signals. Here is relevant information about ACC: 1. ACC working principle: When the distance to the vehicle ahead becomes too small, the ACC control unit can coordinate with the anti-lock braking system and engine control system to apply appropriate wheel braking and reduce engine power output, maintaining a safe distance from the vehicle ahead. 2. ACC usage conditions: The Adaptive Cruise Control system typically activates when the vehicle speed exceeds 25km/h. When speed drops below 25km/h, the driver needs to take manual control. Through system software upgrades, the Adaptive Cruise Control system can achieve 'Stop & Go' functionality to handle frequent stopping and starting situations in urban driving.

16

3

Share

Where is the water tank located in a Corolla?

Are Coolant and Antifreeze the Same?

What do the letters E and F on the fuel tank represent?

What Causes Excessive Transmission Temperature?

What is a C3 driver's license?

What is the working principle of a differential?

What does ACC mean in a car?

What is the most effective way to clean a three-way catalytic converter?

Which city does the Yue E license plate belong to?

Can You Continue Driving When the EPC Light Is On?

What Does Engine Braking Mean?