Where is the water drain outlet of the Nissan Qashqai radiator located?

2 Answers
CaliLynn
09/04/25 4:52am
The water drain outlet of the Nissan Qashqai radiator is located at the bottom of the radiator. The car radiator, which is part of the vehicle's cooling system, consists of an inlet chamber, an outlet chamber, a main plate, and a radiator core in the engine's water cooling system. Taking the 2021 Nissan Qashqai Intelligent Edition as an example, its body dimensions are: length 4401mm, width 1837mm, height 1593mm, with a wheelbase of 2646mm. The 2021 Intelligent Edition Nissan Qashqai is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power of 111kW, and a maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
Was this review help?
18
0
Share
Mandy
09/16/25 5:54am
In my experience with the Nissan Qashqai, the radiator drain outlet is typically located at the bottom of the radiator near the lower right corner. After opening the hood, the radiator is the large metal block at the front of the car. The drain outlet may be a small plastic valve or screw hole specifically designed for draining coolant. It is recommended to let the engine cool completely before replacing the coolant to avoid burns. You can gently loosen it with your hand or a wrench and place a container underneath to catch the draining liquid, preventing any mess. Key points: Replacing the coolant every two years helps prevent engine overheating and corrosion, extending its lifespan. Always wear gloves for safety during the operation. Some Qashqai models may require temporarily removing the underbody shield for better visibility of the drain outlet location.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What Causes Gas in the Fuel Tank?

Gas in the fuel tank is caused by differences in pressure between the inside and outside of the tank, as well as heat from the fuel pump. Below are detailed explanations of these causes: Pressure Difference Between Inside and Outside the Tank: Gas forms in the fuel tank due to the pressure difference between the inside and outside. The pressure inside the tank is higher than the external pressure, causing air and some gasoline to flow under pressure, creating a jet effect. When air flows rapidly through a narrow space, the gas inside the car is actually a mixture of air and fuel vapor. Heat from the Fuel Pump: Heat generated by the fuel pump inside the tank can also lead to gas formation. Both gas and liquid expand when heated, but gas expands at a much higher rate than liquid. However, since the tank is a sealed container with a fixed volume, the pressure of the gas inside becomes greater than the external atmospheric pressure. When the fuel cap is opened, the pressurized gaseous gasoline is released from the tank. As soon as the tank is opened, the pressurized gasoline sealed inside sprays out.
7
0
Share

What is the SN number of a motor vehicle?

SN number of a motor vehicle is an identification code given by the software developer to the software, similar to a person's ID number. The following is a detailed introduction to the SN number of motor vehicles: Meaning of SN code: SN code is the abbreviation of Serial-Number, sometimes also called SerialNo, which is the product serial number. The product serial number is a concept introduced to verify the "legal identity of the product". SN code sometimes also refers to "machine code", which is a protective measure taken by some software to prevent piracy. Function of SN code: Its main function is to prevent the software from being pirated by users. Users must know the serial number to use the software.
16
3
Share

What are the reasons for inconsistent tire pressure in cars?

Car tire pressure inconsistency is caused by factors such as excessive temperature. Below is a relevant introduction to car tire pressure: Excessive temperature: The side exposed to sunlight has a slightly higher temperature, leading to slightly higher tire pressure. Additionally, ground friction coefficients and minor differences during tire inflation contribute to the variation. Hazards of over-inflated or under-inflated tires: Over-inflated tires increase friction with the ground, reducing tire grip and affecting braking performance and driving comfort. This accelerates wear on the central tread, shortening tire lifespan, increasing body vibration, hastening tire aging, reducing wear resistance, and raising the risk of blowouts. Under-inflated tires increase the contact area with the ground, raising fuel consumption, making the steering wheel heavier, and impairing driving performance. The tires are prone to overheating and blowouts, causing the tire body to expand, leading to cracks on the inner and outer sides, accelerating rubber aging, and increasing tire wear.
13
3
Share

Do You Need to Drive the Car for Vehicle File Transfer?

Vehicle file transfer requires driving the car. Below is the relevant information about vehicle file transfer: Vehicle file transfer process: Obtain a used car transaction invoice, imprint the chassis and engine numbers (if not visible to the naked eye, go to a repair shop to get an imprint copy), remove the license plate and take photos, verify the files at the archives office, inspect the vehicle, process the application at the vehicle management office, and package the vehicle management office files, known as the "major file." Documents required for vehicle file transfer: Vehicle file transfer requires the buyer's and seller's ID cards, vehicle license, vehicle grade certificate, and the vehicle itself to be present at the vehicle management office to complete the file transfer procedures. The file bag will specify a deadline for registration, usually two weeks or one month. The buyer must complete the relevant procedures at the vehicle management office within this period; otherwise, they will need to return to the original vehicle management office to re-initiate the file transfer process.
9
2
Share

What does the wrench icon on the dashboard mean?

The appearance of a small wrench icon on the vehicle dashboard indicates that the car requires maintenance. This wrench-shaped indicator light serves as a "maintenance reminder," alerting the driver to perform vehicle maintenance after a certain mileage has been reached. Below are relevant details: When the maintenance reminder appears, it signifies that the car needs servicing. After maintenance is completed, the 4S dealership will reset this maintenance reminder symbol from the vehicle's computer system. The wrench symbol will reappear when the next maintenance interval approaches. The dealership handles this reset after each service. Relevant information about car maintenance is introduced as follows: 1. Car maintenance refers to the periodic preventive work involving inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain components, also known as automobile servicing. 2. Modern vehicle maintenance primarily covers engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, and more. 3. The purpose of car maintenance is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, slow down deterioration processes, and extend the vehicle's service life. The appearance of a small wrench icon on the vehicle dashboard indicates that the car requires maintenance. This wrench-shaped indicator light serves as a "maintenance reminder," alerting the driver to perform vehicle maintenance after a certain mileage has been reached. Below are relevant details: When the maintenance reminder appears, it signifies that the car needs servicing. After maintenance is completed, the 4S dealership will reset this maintenance reminder symbol from the vehicle's computer system. The wrench symbol will reappear when the next maintenance interval approaches. The dealership handles this reset after each service. Relevant information about car maintenance is introduced as follows: 1. Car maintenance refers to the periodic preventive work involving inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain components, also known as automobile servicing. 2. Modern vehicle maintenance primarily covers engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, and more. 3. The purpose of car maintenance is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, slow down deterioration processes, and extend the vehicle's service life.
16
1
Share

Why Does the Car Stall on the Slope in Subject 2?

Stalling on the slope in Subject 2 is caused by either lifting the clutch too low or too high. Here are the detailed explanations: Lifting the clutch too low: During the Subject 2 test, some drivers worry about lifting the clutch too much and habitually lift it too low, thinking this operation is safer. In fact, this method only works when driving on flat roads. If performed on a slope, the car will lack sufficient power, leading to stalling. Lifting the clutch too high: Lifting the clutch too high can also cause stalling. Some drivers believe that starting on a slope requires strong power, so they habitually lift the clutch too high during the test, even beyond the semi-engaged state point, ultimately causing the car to stall.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.