Where is the washer fluid location in the Magotan?

2 Answers
DiPresley
07/25/25 11:16am
The washer fluid location in the Magotan is inside the engine compartment. Open the car's hood and locate the blue-capped filler port for the washer fluid. You can directly pour the washer fluid into it. Generally, the car requires about 4 liters of washer fluid. There is a dipstick inside the reservoir; add the fluid while checking the level, and stop when it reaches the marked line to avoid overflow and unnecessary waste. The Magotan is a model under FAW-Volkswagen, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. In terms of power, the Magotan is equipped with the third-generation EA888 engine, offering three different power combinations: 1.4T and 2.0T with high and low power outputs.
Was this review help?
18
4
Share
SanCarmen
08/11/25 7:58pm
Finding the windshield washer fluid reservoir for the Volkswagen Magotan is actually quite simple. I usually enjoy doing my own car maintenance. After opening the hood, you can spot the reservoir on the left side of the engine compartment near the windshield. The cap is typically blue or black with a wiper or windshield icon, making it easy to identify. When refilling, I use dedicated windshield washer fluid and pour it in until the level reaches the marked line—never overfill to leave room for thermal expansion. If the fluid level is low, the wiper spray will make loud noises or even fail to work, damaging the wiper blades, so I check it monthly. In winter, it's essential to use antifreeze washer fluid to prevent the pipes from freezing and bursting. Routine maintenance like this also extends part lifespan. From my experience, topping it up takes just minutes, saving money and ensuring peace of mind.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

Which car brands have the steering wheel on the right?

The position of a car's steering wheel is determined by the traffic rules of the country and is unrelated to the type of vehicle. If a country or region drives on the left side of the road, the cars sold there will have the steering wheel on the right; conversely, if driving is on the right side, the steering wheel will be on the left. This variation is due to differences in traffic regulations across countries. Below is additional information about car steering wheels: 1. Traffic systems: There are two main traffic systems worldwide—driving on the right and driving on the left. Approximately 90% of countries practice right-hand traffic, with the remainder using left-hand traffic. 2. Correction: Initially, when Karl Benz invented the car, the steering wheel was centered. However, based on ergonomic principles, over 90% of people are right-handed. To ensure accurate and safe operation of the gearshift and brakes, designers naturally placed the driver's seat on the right.
20
2
Share

What is the normal pH value of antifreeze?

Generally, the neutral pH is 7, which is used to slow down consumption and protect metal components. pH indicates acidity or alkalinity, with 7 being neutral, less than 7 being acidic, and greater than 7 being alkaline. The main reason is electrochemical corrosion. Only under specific pH conditions can the corrosion protection effect on metals be better. The principles for selecting antifreeze are as follows: 1. Choose the freezing point of the antifreeze based on the environmental temperature conditions: The freezing point of the antifreeze is one of the most important indicators, determining whether the antifreeze can prevent freezing. Generally, the freezing point of the antifreeze should be selected to be around 10°C to 15°C lower than the lowest winter temperature in the local environment. 2. Choose the antifreeze according to the different requirements of the vehicle: Generally, imported vehicles, domestically produced vehicles, and high-end vehicles should use permanent antifreeze (2 to 3 years), while ordinary vehicles can use direct-use antifreeze, and softened water can be used in summer.
1
3
Share

What are the effects of replacing run-flat tires with regular tires on a car?

For vehicles that have not undergone specialized adjustments, using run-flat tires can reduce driving comfort and handling performance. Car models equipped with run-flat tires feature specially matched designs in the chassis, suspension, and wheel rims, delivering superior performance in road driving stability. Below is extended information about tires: 1. Run-flat tires: These are one of the important components of a car, with most vehicles using regular tires. Some higher-end car models are equipped with run-flat tires, which also offer excellent performance in road driving stability. In the event of a tire deflation, the vehicle can still travel 250 kilometers at a speed of 80 km/h. 2. Balancing test: After replacing tires, it is essential to perform a dynamic balancing test on each wheel to prevent abnormal vibrations during high-speed driving. 3. Tire lifespan: The service life of tires is generally around 2-3 years or 60,000-100,000 kilometers. Chinese regulations require tire replacement when the tread wear reaches 1.6mm.
9
1
Share

What is the bulb model for the Haval F5 headlights?

The bulb model for the Haval F5 headlights is H7. The Haval F5 adopts Haval's new design style, featuring a large-mouth grille with a dot-matrix interior design, paired with willow-leaf-shaped headlight clusters, creating a more sporty effect compared to the H4, making it appear more youthful. Below is relevant information about the Haval F5: 1. As a model targeting the young and fashionable consumer group, the Haval F5 has a significantly different exterior design from the H-series models of the same brand, adopting a design language similar to WEY, with a styling that leans more towards a sporty coupe SUV. 2. The official claim is that there is no hierarchical distinction between the F-series and H-series in terms of positioning. These two series target different markets through distinct exterior and interior design styles. 3. In terms of the powertrain, the Haval F5 is equipped with a 1.5T engine and a 7-speed dual-clutch transmission. The engine delivers a maximum power of 124kW and a maximum torque of 285Nm, making it the highest among these models. Given the relatively heavy weight of Haval vehicles, this also serves as the foundation for ensuring power.
1
1
Share

What's the difference between turning the steering wheel one and a half turns and turning it to full lock?

Turning the steering wheel to full right lock means turning it one and a half turns to the right, and turning it to full left lock means turning it one and a half turns to the left. Therefore, to straighten the wheels after a full right lock, turn the wheel back one and a half turns, and the same applies for a full left lock. If you turn the wheel half a turn to the right, turning it back half a turn to the left will straighten the wheels. When turning the steering wheel, avoid using excessive force or making sudden turns and returns. Also, do not turn the steering wheel when the vehicle is stationary. Here are some additional details about the steering wheel: 1. Note: The correct hand position on the steering wheel is at the "9 and 3 o'clock" positions. When turning the steering wheel, keep both hands on it and rotate it up to 180 degrees in either direction without letting go. 2. Traditional mechanical steering system: The steering wheel is connected to a shaft in the steering gear that has teeth, forming a small gear. This small gear meshes with a rack, which acts like a large gear. The number of teeth on the small gear and the rack is fixed. The ratio of the small gear's teeth to the rack's teeth determines how many turns of the steering wheel are needed.
7
5
Share

What Causes a Truck to Emit Black Smoke When Starting?

Excessive black smoke from diesel engine exhaust is mostly caused by incomplete combustion due to uneven or excessive fuel supply in each cylinder, insufficient air intake, poor atomization, or premature injection timing. Below are the inspection methods: 1. Remove the air filter and observe the exhaust smoke color: If the black smoke condition improves, the fault is caused by severe contamination of the air filter. 2. Check if the fuel supply timing is too early: If it is, adjust it accordingly. 3. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test: When a cylinder's fuel supply is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply in that cylinder. If the engine speed changes slightly and the black smoke disappears, it indicates poor spray quality of that cylinder's injector. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it confirms that the original injector was faulty.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.