Where is the Volvo S90 PIN code located?

1 Answers
BlakelyAnn
07/29/25 2:43pm
The car's PIN code is generally found in the vehicle's user manual. If the security envelope was already opened when you purchased the car, it indicates that the anti-theft system's PIN code might have been stolen by others. More relevant information is as follows: Query: The car's PIN code is usually checked at the 4S store. Every car has a unique PIN code, which is returned to the owner during the new car handover. Of course, the 4S store also keeps a copy. If the owner really forgets it, they can check it on the computer at the 4S store. Replacement: The car's PIN code is commonly used for matching performance after replacing important components, clearing fault codes, and matching car keys. Dealers can read the anti-theft device identification code from the control unit, then apply to query the password. The car company will then dispatch data from the database to the dealer. It is the vehicle's production identification code, ensuring the car's security.
Was this review help?
4
2
Share
More Forum Discussions

What is the maximum speed limit on urban roads without speed restrictions?

According to Article 45 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: Motor vehicles driving on roads must not exceed the speed indicated by speed limit signs or markings. On roads without a central dividing line, the speed limit for urban roads is 30 kilometers per hour, and for highways, it is 40 kilometers per hour. On roads with only one motor vehicle lane in the same direction, the speed limit for urban roads is 50 kilometers per hour, and for highways, it is 70 kilometers per hour. The following are the relevant speed limit regulations: 1. Vehicle type speed limits: The maximum speed for small passenger vehicles must not exceed 120 km/h, for other motor vehicles, it must not exceed 100 km/h, and for motorcycles, it must not exceed 80 km/h. The minimum speed must not be lower than 60 km/h. 2. Lane speed limits: On roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. On roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h. The minimum speed for the middle lane is 90 km/h. Vehicles traveling at speeds above 60 km/h but below 90 km/h should drive in the rightmost lane.
14
5
Share

How to Identify a Flood-Damaged Vehicle?

Here are methods to identify a flood-damaged vehicle: 1. Open the engine compartment. If the vehicle has been submerged in water, even after cleaning, some wiring harnesses in the engine compartment may still retain mud or water stains. 2. If the interior has been flooded, the vehicle would have been dried out. Seats that have been soaked and then dried will still show some traces, so examine them carefully. If there are many wrinkles, be cautious. 3. Check the metal parts under the interior, such as under the seats. If there is rust on the springs or support rods, it might be a flood-damaged vehicle, though it could also be due to poor rust prevention by the manufacturer. 4. Inspect the seat belts. Pull them out completely and check for mold or dampness. If several seat belts show these signs, it’s highly likely a flood-damaged vehicle. 5. Examine the sealed areas of components. Since the interior is tightly assembled from various parts, the presence of mud could indicate a flood-damaged vehicle. 6. Check the chassis, which directly reflects the vehicle’s condition. Look for obvious rust. If the chassis has been submerged in water for a long time, the rust marks will be quite noticeable.
18
3
Share

Are 4WD Vehicles More Stable in Rainy Weather?

4WD vehicles are more stable on slippery roads. Four-wheel drive refers to a vehicle maintaining a four-wheel drive form throughout the entire driving process. The following are specific introductions to the 4WD system modes: 1. Full-time drive: The front and rear wheels always maintain a 4-wheel drive mode, with the engine output torque set at a 50:50 ratio between the front and rear wheels during driving. Full-time drive offers excellent driving control and tracking performance, but it consumes more fuel and has poor fuel economy. 2. Part-time drive: The driver can switch between 2-wheel drive or 4-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for general off-road vehicles or 4WD SUVs. 3. On-demand drive: The drive mode is controlled by the computer. Normally, (front) rear-wheel drive is used on regular road surfaces. If the road conditions are poor or the drive wheels slip, the computer will automatically detect and immediately distribute the engine output torque to the other two wheels, switching to 4-wheel drive mode. This mode is simple to operate.
4
2
Share

What is the pH value of waste engine oil

The pH value of waste engine oil is 4.5-6. Waste engine oil refers to oil that has been contaminated with water, dust, other oils, and metal particles from component wear during use, leading to darkening in color and increased viscosity. It also refers to oil that has gradually deteriorated, forming organic acids, colloids, and asphalt-like substances. The regeneration of waste engine oil involves removing impurities through methods such as sedimentation, distillation, acid washing, alkali washing, and filtration. It is a toxic substance and classified as a nationally designated solid hazardous waste. The unauthorized trading of waste engine oil is strictly prohibited, and it should be handed over to qualified waste oil treatment companies for proper disposal. According to regulations such as the 'Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste,' 'Administrative Measures for the Licensing of Hazardous Waste Operations,' and 'Administrative Measures for the Manifest System of Hazardous Waste Transfer,' waste engine oil, diesel, heavy oil, etc., are classified as hazardous wastes under national regulations. Individuals and entities generating hazardous wastes must report the types, quantities, flow directions, storage, and disposal of such wastes to the environmental protection authorities and handle them in accordance with national regulations. Units engaged in the collection, storage, and disposal of hazardous wastes must apply for an operation license from the environmental protection authorities, which is processed by provincial-level environmental protection departments.
2
3
Share

Where is the chassis number of Foday brand vehicles located?

Foday brand vehicle chassis numbers can be found under the front windshield on the driver's side, as well as on the motor vehicle license. New licenses usually print the VIN code in the "Chassis Number" column. Other locations include insurance policies, various plates in the engine compartment, and the driver's side door pillar. The vehicle frame number is a unique set of seventeen English letters used to identify the car's manufacturer, engine, chassis serial number, and other specifications. On most vehicles, the frame number can be found on the driver's side dashboard and is visible from outside through the windshield. This marking is typically located on a sticker or plate inside the driver's side door or on the door frame base. Sometimes, the frame number may be printed inside the glove compartment. It also appears on the vehicle title certificate and insurance documents.
20
0
Share

What Causes the Left Wheel to Cross the Line During a Right-Angle Turn?

The reason for crossing the line during a right-angle turn is usually due to incorrect seat positioning or turning the steering wheel too early. Before entering the turn, position the car as far away from the turning point as possible within the lane boundaries and proceed slowly. When the rearview mirror on the turning side passes the turning line, steer fully toward the turning point and proceed forward, while observing the rearview mirror to ensure the rear wheel clears the turn. Once cleared, straighten the wheel when the front of the car aligns properly. Below are techniques for executing a right-angle turn: Release the handbrake, shift into first gear, and slowly lift the clutch to the semi-engaged state, allowing the car to move smoothly to the starting position of the right-angle turn. Keep the car aligned with the right edge line at a steady speed, maintaining a distance of about 20cm from the right edge. The left turn signal can be activated during this phase. When the door handle aligns with the inner corner point of the turn, begin turning the steering wheel left. During the turn, ensure the pivot point of the left wiper follows the left edge line to avoid crossing it. As the middle of the car approaches the inner corner point, start straightening the wheel to the right. Align the car properly and exit the area at a steady speed.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.