Where is the volume button on the Jaguar XEL?

2 Answers
SanAna
07/24/25 7:29pm
Jaguar XEL's volume button is located on the center console, shaped like an inverted triangle. Below are the detailed specifications of the Jaguar XEL: 1. Design Style: The new Jaguar XEL largely retains the design language of the XE model, including the signature Jaguar front grille and sharp headlight clusters on both sides. Additionally, the lines around the air intakes on the front bumper are smoother. The rear of the Jaguar XEL also follows the styling of the current XE model, featuring a dual-exhaust layout. 2. Features: The Jaguar XEL comes equipped with a panoramic camera, ACC adaptive cruise control, and a dual sunroof, among other features. 3. Powertrain: The Jaguar XEL is powered by a new 2.0T engine, available in two power outputs: a low-power version with a maximum output of 200 horsepower and a high-power version with a maximum output of 250 horsepower. The transmission is an 8-speed automatic gearbox.
Was this review help?
8
5
Share
ODeclan
08/11/25 10:47am
The volume controls on the Jaguar XEL are typically located on the left side of the steering wheel, either as a scroll wheel or separate up/down buttons, allowing easy adjustment while driving for both safety and convenience. I remember spending a minute or two finding them when I first got the car, but it quickly became second nature—especially useful when adjusting music or navigation volume without distraction. This layout intentionally avoids the need to glance down at the infotainment screen, reducing accident risks. Speaking of audio, the XEL’s default sound system delivers impressive quality, though excessive volume can mask road noise and impact driving awareness. For maintenance, I recommend gently wiping the buttons to prevent dust buildup (which may cause contact issues) and avoiding alcohol-based cleaners to preserve the coating. Overall, this thoughtful design balances focus on driving with seamless music enjoyment—just keep the volume moderate to stay alert.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Does the New BMW 3 Series Automatically Close Windows When Locked?

When the new BMW 3 Series is locked, it automatically closes the windows. The vehicle features an automatic window-closing function upon locking, which requires holding down the lock button for the windows to automatically roll up. Definition of One-Touch Window Control: One-touch window control refers to a system where car window glass can be adjusted to the desired position with a single button press. Generally, vehicles equipped with one-touch window control have two settings for the window adjustment switch. The first button position functions similarly to a standard electric window. The second position allows the window to fully open or close automatically with a single press and release. To ensure the longevity of the window lift motor, all four windows are typically equipped with a thermal protection function. Functions of One-Touch Window Control: If the window is repeatedly operated for raising and lowering within a short period, the motor will enter a thermal protection state and cease the operation. During the automatic window-closing process, if an object is detected between the glass and the window frame, the window will automatically stop rising and return to its initial position. Vehicles with one-touch window control also come with an anti-pinch feature. Do not attempt to test this function with any part of the body.
14
1
Share

What is the principle of BYD DM-i super hybrid technology?

DM-i super hybrid technology is designed based on the high-safety Blade Battery and high-performance high-power motor. It primarily relies on the high-power efficient motor for driving, while the gasoline engine's main role is to generate electricity within its efficient rpm range and directly drive the vehicle when appropriate. By altering the traditional hybrid design that is predominantly engine-driven, it significantly reduces fuel consumption. Additional information: 1. Architecture: DM-i super hybrid is based on a large-capacity battery and high-power motor. During driving, the vehicle relies on the high-power motor for propulsion, while the gasoline engine primarily functions to charge the battery. It directly engages only when additional power is needed, and even then, it works in tandem with the motor to reduce load. This hybrid technology differs from traditional hybrid systems that heavily depend on the engine, thereby achieving more effective fuel efficiency. 2. When the battery is sufficiently charged: When a DM-i model has sufficient battery charge, it operates like a pure electric vehicle, with the motor providing adequate power for various road conditions. When the battery is low, the DM-i model autonomously determines whether to use electricity, fuel, or a combination of both based on system conditions.
12
3
Share

What is the fuel consumption of BYD DM-i when the battery is depleted?

The fuel consumption of BYD Tang DM-i when the battery is depleted is 5.3 liters per 100 kilometers. Fuel consumption when the battery is depleted refers to the fuel consumption of a car when it relies solely on fuel for power without any electrical energy. If the car runs out of electricity, it can only be driven by the engine consuming fuel. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. If the air conditioning cooling effect is poor, it will increase the fan speed and lower the temperature to achieve a cooling effect. 2. Frequent sudden braking: Frequent sudden braking is a major reason for high fuel consumption in cars. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid setting the air conditioning too high in small-displacement cars: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the car. Wait until the car has cooled down moderately before turning on the air conditioning.
5
3
Share

Why Does the Car Roof Lining Fabric Fall Off?

Car roof lining fabric falls off due to the aging of the sponge backing. Here are specific measures for dealing with a falling car roof lining: 1. Edge adhesive failure: The edge adhesive failure is most likely caused by the aging of the sponge backing, leading to edge detachment. This issue is relatively easy to fix. Purchase a bottle of specialized car adhesive or glue product, spray the glue along the edge after peeling it open, let it dry for 3-5 minutes, and then press it back into place. 2. Middle section sagging: If the middle section of the roof lining sags or falls off, and it's inconvenient to remove, you can opt for clip repairs. Choose clips that match the color of the lining. The downside is that it may not look as aesthetically pleasing, but it's a practical solution. 3. Large area detachment: In this case, the entire roof lining needs to be removed. Take off the old lining fabric, clean off the aged sponge from the surface, prepare a new piece of roof lining fabric along with specialized roof adhesive, apply the adhesive to both sides, let it dry for 3-5 minutes before bonding, and finally reinstall the roof lining. However, for better repair results, it's advisable to visit a repair shop.
20
5
Share

What Causes a Land Rover Transmission to Overheat?

Reasons for Land Rover transmission overheating: Insufficient lubricating oil in the transmission or the use of lubricating oil that does not meet the required specifications, excessively tight bearing assembly, overly tight gasket and washer assembly, and excessively small gear meshing clearance in newly replaced gears. To avoid affecting usage, it is recommended to promptly contact a 4S dealership for repair and servicing. Additional information: 1. The three major components of a car: These refer to the engine, transmission, and chassis. The quality of these three major components has a significant impact on the overall quality of the car. Therefore, it is advised to pay close attention to the quality of these three components when purchasing a car. 2. Engine and transmission: These belong to the powertrain of the car. The engine is the heart of the car, as it generates power that is then transmitted to the transmission. Finally, the transmission can transfer the power to the wheels via the driveshaft. The role of the transmission is to change speed and torque, ensuring that the power output from the engine can meet the car's demands under any operating conditions. There are two types of transmissions in cars: manual transmissions and automatic transmissions. Common automatic transmissions in cars include three types: AT transmissions, CVT transmissions, and dual-clutch transmissions.
8
2
Share

How to reset the maintenance light on a Zotye Z300?

"The method to reset the maintenance light on a Zotye Z300: Turn off the ignition switch and press and hold the two long buttons on the dashboard; turn on the ignition switch to make all dashboard lights illuminate; press the two long rod buttons on the dashboard until the maintenance light goes off; release the two long rod buttons after the maintenance light is off; restart the car, and the maintenance light reset is completed. Below is related content: Benefits of regular maintenance: Timely replacement of excessively dirty engine oil effectively protects the engine or transmission, etc. Sometimes issues that cannot be detected during driving can be identified through maintenance checks, eliminating potential hazards. It makes the vehicle run more smoothly, reduces engine wear, and extends the vehicle's lifespan. Daily vehicle maintenance: Apart from scheduled mileage maintenance at 4S shops, cars also require maintenance during daily use. Daily maintenance mainly includes the following 5 items: clean the car body, windows, light glass, etc., to remove dust and sand spots, preventing paint corrosion; check whether the tire tread is deep, whether the tire pressure is normal, and whether the screws are tight; check the sealing condition of the engine intake pipe and whether the filter has issues; check whether the battery electrolyte is sufficient, whether the terminal connections are tight, and whether the ventilation holes are blocked; check whether the dashboard, wipers, and lighting system have any faults."
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.