Where is the Volkswagen vehicle nameplate located?

1 Answers
McMason
07/29/25 6:09pm
FAW-Volkswagen Lavida's nameplate is located under the hood, inside the engine compartment, on the plastic cover of the left bumper near the engine. Vehicle Nameplate: The vehicle nameplate is a sign indicating the basic characteristics of the vehicle. Its main contents include: vehicle model, engine model, engine displacement, engine rated power, vehicle identification number, total mass, load capacity, manufacturing number, manufacturing year, manufacturing country, manufacturer name, etc. Nameplate Location: The vehicle nameplate is generally located at the front of the vehicle, in a position that is easy to observe, such as below the B-pillar; it is usually located on the inner wall of the engine compartment. Most are near the side wall of the cabin or the rear wall of the engine compartment, and some are on the side walls of the engine compartment.
Was this review help?
7
1
Share
More Forum Discussions

What do Mileage A and Mileage B mean?

Mileage A and Mileage B are both trip meters that can be reset, and the owner can set them as needed. Applications of Mileage A and Mileage B: Typically, a car's dashboard will display three mileage readings. The total mileage cannot be reset, while the two trip meters, A and B, can be set by the owner for marking purposes. For example, Mileage A can be set as the maintenance mileage, and Mileage B can be set as the fuel tank mileage. This makes it easier for the owner to track maintenance and calculate fuel consumption. How to reset Mileage A and Mileage B: Most car models allow resetting by pressing and holding the settings button or the OK button for more than three seconds. Both trip meters A and B can be reset, though the method may vary depending on the car model.
15
3
Share

How to reset the tire pressure warning light on a 2019 Honda CR-V?

2019 Honda CR-V tire pressure indicator reset method: 1. Press the arrow button at the lower right of the steering wheel until the central display shows "Settings." 2. Press the SEL/RESET button, and the central display will show "Enter Tire Pressure Monitoring System Calibration." 3. Press the SEL/RESET button again, then press the arrow button at the lower right of the steering wheel, and the central display will show "Calibration 2/2." 4. Press the SEL/RESET button, and the central display will show "Calibration started," completing in a few seconds. Additional information: 1. The tire pressure monitoring system automatically monitors tire pressure in real-time while driving and alerts the driver to leaks or low pressure to ensure driving safety. 2. "TPMS" is the abbreviation for "Tire Pressure Monitoring System," which is a direct tire pressure monitoring system.
18
3
Share

What Does a Cornering Light Mean?

Cornering lights are small bulbs within the headlights that illuminate at specific angles, assisting in lighting up blind spots during turns and providing early illumination of the upcoming turning area, thereby enhancing driving safety. Operation of Cornering Lights: When the driver turns the steering wheel, a separate set of bulbs on one side lights up (some vehicles use fog lights as cornering lights), helping to illuminate blind spots during the turn. Shortly after the steering wheel is straightened, the single-side cornering light automatically turns off. The differences between adaptive headlights and cornering lights are as follows: Adaptive headlights rely on rotating the reflector cup to adjust the direction of the bulb's illumination, while cornering lights use a fixed bulb set at a special angle within the headlight that activates when needed at certain angles. Compared to cornering lights, adaptive headlights offer more flexibility and can be used in a wider range of scenarios.
4
5
Share

How many consecutive hours of driving is considered fatigued driving?

Continuous driving for 4 hours is considered fatigued driving, for the following reasons: According to Article 62 of the Regulations for the Implementation of the Road Traffic Safety Law, the following acts are prohibited when driving a motor vehicle: 1. Driving when the doors or compartments are not properly closed; 2. Hanging or placing items within the front or rear windows of the motor vehicle's cab that obstruct the driver's view; 3. Making or receiving calls on handheld phones, watching TV, or other acts that hinder safe driving; 4. Turning off the engine or coasting in neutral when going down a steep slope; 5. Throwing items onto the road; 6. Riding a motorcycle with hands off the handlebars or hanging items on the handlebars; 7. Driving a motor vehicle continuously for more than 4 hours without stopping for a break or stopping for less than 20 minutes; 8. Honking the horn in areas or sections where honking is prohibited.
9
1
Share

What causes the loud engine noise in the Audi A6L 2.0T?

Audi A6L 2.0T's loud engine noise may be the ticking sound from the high-pressure fuel pump, which is normal as all direct-injection engines have high-pressure fuel pumps. The Audi A6L is equipped with three engines in total: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. In terms of interior, the Audi A6L comes standard with Audi's virtual cockpit, featuring a 10.1-inch display screen, an 8.6-inch touchscreen below, and a 12.3-inch full LCD instrument panel. The new generation of Audi A6L is equipped with the latest MMI system, offering intelligent search suggestions, voice control, CartoX services, and other functions.
13
2
Share

How can beginners determine the position of the wheels?

Here are methods for beginners to determine the position of the wheels: The driver should maintain a proper sitting posture and look straight ahead. 1. Determining the left wheel position. When the connection point between the left wiper and the car body aligns with the junction of the left lane marking and the hood, the left wheel is already on or crossing the lane divider. Since the position and size of wipers vary by vehicle, this connection point is not standardized. When the left lane divider is about 20cm away from the connection point near the left A-pillar, the left wheel is likely on or about to cross the line. 2. Determining the right wheel position. Due to the driver's left-side position, the method for the right wheel slightly differs. When the right lane marking aligns with the center of the hood, the vehicle is generally on or crossing the line.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.