Where is the Volkswagen Polo J519 module located?

1 Answers
AllisonLee
07/30/25 12:06am
Remove the driver's side footwell cover, detach the lower A-pillar trim panel, and unplug the connector of the driver's side footwell lighting to access the J519 module. The Volkswagen BCM (Body Control Module) integrates the functions of traditional J519, J393, and J533 modules (J533 may be independent). Key features are as follows: 1. The BCM employs integrated control, combining various single relays and actuators to significantly reduce failure rates. 2. Extensive use of LIN bus control and single-wire system allows one master controller to manage up to 16 slave controllers, offering high scalability while substantially reducing wiring harness weight.
Was this review help?
13
1
Share
More Forum Discussions

Differences between Audi A6L DKU and DKW engines?

Differences between Audi A6L DKU and DKW engines are as follows: DKU is the engine model for the 2.0T low-power version; DKW is the engine model for the 2.0T high-power version. Additional information: 1. The Audi A6L is equipped with three engines in total. The 2.0T low-power version engine model is DKU, the 2.0T high-power version engine model is DKW, and the 3.0T engine model is DLZ. In terms of the transmission system, the entire series is equipped with a 7-speed DSG gearbox as standard, while the 45TFSI and 55TFSI models also come with the quattro-ultra intelligent all-wheel-drive system, achieving a balance between fuel consumption and off-road capability. 2. The Audi A6L comes standard with features such as tire pressure monitoring, a non-full-size spare tire, LED headlights/taillights (with dynamic turn signals and headlight cleaning), progressive steering system, electric adjustment for front seats, Audi virtual cockpit, cruise control, automatic start-stop, and Audi Connect technology.
19
4
Share

Should the Haval H6 with turbo use 92 or 95 octane gasoline?

According to the official recommendation, the Haval H6 with turbo can use 92 octane or higher gasoline. Therefore, both 92 and 95 octane are acceptable. Below is relevant information: 1. The gasoline octane rating represents anti-knock performance. A higher number indicates better anti-knock performance, but it has no relation to the quality of the gasoline itself. All octane levels are refined strictly according to uniform standards. The difference between 92 and 95 octane lies in the ratio of isooctane to n-heptane. 92 octane consists of 92% isooctane and 8% n-heptane, while 95 octane consists of 95% isooctane and 5% n-heptane. The proportion of isooctane affects the anti-knock performance of gasoline with different octane ratings—the higher the octane, the better the anti-knock performance. 2. Different engines have varying requirements for gasoline's anti-knock performance. Generally, higher-priced car models with more powerful engines require gasoline with better anti-knock performance to handle intense power output. In contrast, more affordable cars with weaker engine outputs, such as 1.5L or 1.5T engines, have lower anti-knock requirements. The Haval H6 is equipped with a 1.5T engine, so 92 octane gasoline is sufficient.
5
3
Share

Is the Fit 1.3 equipped with an imported engine?

The Fit 1.3 does not use an imported engine; it is a joint-venture engine produced domestically by GAC Honda. The relevant introduction of the Honda Fit is as follows: 1. The Honda Fit adopts the overall design concept of "Exciting-H-Design," featuring Honda's latest family-style front face design concept "Solid Wing," where the front grille and headlights are integrated, highlighting a sharp and cool appearance. 2. The side of the body employs a unique and cool blade-style double waistline design, complemented by a tension-filled rear design and LED light source rear combination lamps, presenting a more premium texture. 3. There has been significant improvement in safety. The redesigned front beam structure differs from previous models, offering better energy absorption during collisions. 4. Honda's new safety system further protects occupants. The system is equipped with a front wide-angle camera that works in conjunction with eight front and rear sonar sensors to enhance the vehicle's emergency automatic braking function. This feature is expected to become standard on the fourth-generation Fit.
15
3
Share

What is the 0-100 km/h acceleration time of the Geely Xingyue?

According to the officially released data, the Geely Xingyue has a 2.0T displacement and achieves a 0-100 km/h acceleration time of 7.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Geely Xingyue 2.0T has a maximum torque of 300 Nm and a 0-100 km/h acceleration time of 7.9 seconds. In comparison, the Civic 1.5L has a torque of 180 Nm and a 0-100 km/h acceleration time of 8.7 seconds. Transmission efficiency: The transmission serves as the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Geely Xingyue 2.0T is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Geely Xingyue 2.0T has a power-to-weight ratio of 127 Hp/T and a 0-100 km/h acceleration time of 7.9 seconds. The Civic 1.5L has a power-to-weight ratio of 98 Hp/T and a 0-100 km/h acceleration time of 8.7 seconds.
15
4
Share

Why does the Kia K4 sunroof not close and automatically bounce back?

The reason why the Kia K4 sunroof does not close and automatically bounces back: Lack of lubrication in the guide rails causes excessive resistance, triggering the automatic anti-pinch function and causing the sunroof to bounce back. Adding lubricant to the sunroof guide rails can solve the problem. Extended information: I. Reasons why the Kia K4 sunroof cannot close properly include: 1. The control module's program is disordered. 2. The position signal of the sunroof glass or sunshade is distorted. II. Sunroof maintenance: 1. Before opening the sunroof, check if there are any obstacles on the roof that might hinder its sliding. 2. Avoid using the sunroof on bumpy roads to prevent vibration-related deformation of the sunroof and slide rail components, which could severely damage the motor. 3. Do not open the sunroof during rain or when washing the car to prevent acid rain or water droplets from aging the rubber seals or causing metal parts to rust. 4. After winter snow or car washing, immediately open the sunroof and wipe off any moisture around the edges to prevent the sunroof from freezing.
14
4
Share

What are the dimensions of the Ling Shang in terms of length, width, and height?

The dimensions of the Ling Shang are 4695mm in length, 1780mm in width, and 1455mm in height, as per official data. The length of the Ling Shang refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Ling Shang is powered by a 2.0L naturally aspirated engine paired with a CVT transmission, delivering a maximum power of 126kW and a maximum torque of 205Nm, with a combined fuel consumption of 5.9L per 100km under standard driving conditions. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of a vehicle's width data lies in ensuring adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.